Set stricter dividers to stabilize the PLL's feedback loop. In practice, the actual output isn't exactly the target clock, but slowly oscillates around it. This makes it more stable.
The values here are taken from the non-DC code. Signed-off-by: Timur Kristóf <[email protected]> --- drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c index b4f5b4a6331a..00f25e2ee081 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c @@ -1700,6 +1700,13 @@ bool dce110_clk_src_construct( clk_src->cs_mask->PLL_POST_DIV_PIXCLK; calc_pll_cs_init_data.min_pll_ref_divider = 1; calc_pll_cs_init_data.max_pll_ref_divider = clk_src->cs_mask->PLL_REF_DIV; + + if (ctx->dce_version <= DCE_VERSION_10_0) { + /* Set stricter dividers to stabilize the PLL's feedback loop on old HW. */ + calc_pll_cs_init_data.min_pix_clk_pll_post_divider = 2; + calc_pll_cs_init_data.min_pll_ref_divider = 2; + } + /* when 0 use minInputPxlClkPLLFrequencyInKHz from firmwareInfo*/ calc_pll_cs_init_data.min_override_input_pxl_clk_pll_freq_khz = 0; /* when 0 use maxInputPxlClkPLLFrequencyInKHz from firmwareInfo*/ -- 2.51.0
