VCE1 is the Video Coding Engine 1.0 found in SI GPUs. Add support for the VCE1 IP block, which is the last missing piece for fully-featured SI support in amdgpu. Co-developed by Alexandre Demers.
This VCE1 implementation is based on: VCE2 code in amdgpu VCE1 code in radeon Research by Alexandre Suggestions from Christian The biggest challenge was getting the firmware validation mechanism to work correctly. Due to some limitations in the HW, the VCE1 requires the VCPU BO to be located at a low 32-bit address. This was achieved by placing the GART in the LOW address space and manually mapping the VCPU BO in the GART page table. Also hook up the VCE1 to the DPM. Tested on the following HW: Radeon R9 280X (Tahiti) Radeon HD 7990 (Tahiti) FirePro W9000 (Tahiti) Radeon R7 450 (Cape Verde) Changes in v2: - Refactor the new GART helper to be reusable - Reduce reserved GART size from 16 MiB to 2 MiB - Clear VCPU BO only on device creation - Save VCPU BO on suspend, restore on resume - Rework how an empty codec list is handled - Add different workaround for FirePro W9000 - Address all other feedback from the review Changes in v3: - Drop patch to return empty codec list when VCE is not present, this is actually not needed. - Instead of relying on gmc_v6 to set the GART space before GTT, add a new function amdgpu_vce_required_gart_pages() which is called from amdgpu_gtt_mgr_init() directly. Looking forward to reviews and feedback! Timur Kristóf (13): drm/amdgpu/gmc6: Place gart at low address range drm/amdgpu/gart: Add helper to bind VRAM pages (v2) drm/amdgpu/ttm: Use GART helper to map VRAM pages (v2) drm/amdgpu/vce: Clear VCPU BO before copying firmware to it (v2) drm/amdgpu/vce: Move firmware load to amdgpu_vce_early_init drm/amdgpu/vce: Save/restore and pin VCPU BO for all VCE (v2) drm/amdgpu/vce1: Clean up register definitions drm/amdgpu/vce1: Load VCE1 firmware drm/amdgpu/vce1: Implement VCE1 IP block (v2) drm/amdgpu/vce1: Ensure VCPU BO is in lower 32-bit address space (v3) drm/amd/pm/si: Hook up VCE1 to SI DPM drm/amdgpu/vce1: Enable VCE1 on Tahiti, Pitcairn, Cape Verde GPUs drm/amdgpu/vce1: Workaround PLL timeout on FirePro W9000 drivers/gpu/drm/amd/amdgpu/Makefile | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c | 36 + drivers/gpu/drm/amd/amdgpu/amdgpu_gart.h | 3 + drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 12 +- drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c | 197 ++-- drivers/gpu/drm/amd/amdgpu/amdgpu_vce.h | 3 + drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c | 2 +- drivers/gpu/drm/amd/amdgpu/si.c | 22 +- drivers/gpu/drm/amd/amdgpu/sid.h | 40 - drivers/gpu/drm/amd/amdgpu/vce_v1_0.c | 839 ++++++++++++++++++ drivers/gpu/drm/amd/amdgpu/vce_v1_0.h | 32 + drivers/gpu/drm/amd/amdgpu/vce_v2_0.c | 5 + drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 5 + drivers/gpu/drm/amd/amdgpu/vce_v4_0.c | 57 +- .../drm/amd/include/asic_reg/vce/vce_1_0_d.h | 5 + .../include/asic_reg/vce/vce_1_0_sh_mask.h | 10 + drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 18 +- 18 files changed, 1103 insertions(+), 186 deletions(-) create mode 100644 drivers/gpu/drm/amd/amdgpu/vce_v1_0.c create mode 100644 drivers/gpu/drm/amd/amdgpu/vce_v1_0.h -- 2.51.0
