If you want to do what you are proposing, you don't need CBT.

Whenever you recognize a "scalein" condition, just set the BuyPrice to the 
average of buyprice1 and buyprice2, and the position size to double the usual 
size. The backtester exits all positions (initial and scaled in) at a single 
Sell signal, so that is effectively what is happening anyway.

Mike

--- In [email protected], "jmdeacon" <jmdea...@...> wrote:
>
> What I want would not need intraday data.  The way I would want ti code with 
> OHLC is something like this:
> 
> limitprice1 = (ref(c,-1)*0.99);
> limitprice2 = (ref(c,-1)*0.98);
> 
> buyprice1 = min(O,limitprice1);
> buyprice2 = min(O,limitprice2);
> 
> Buy would occur if L < limitprice1.
> Scalein would occur if L <limitprice2.
> 
> If the low is less than the limitprice1, I would enter the position.  If the 
> low is less than the limitprice2, then I would scalein.  If the open is below 
> both prices then I would enter a double position at the price of the open.
> 
> I already have this coded to work on seperate bars, but many times, the 
> pullback occurs on the same bar and I would like to backtest that occuring on 
> the day of the initial purchase.
> 
> So, the question is, is there some kind of CBT coding that would allow me to 
> test what I want to test.
> 
> Thanks,
> 
> John
> --- In [email protected], "Mike" <sfclimbers@> wrote:
> >
> > Hi
> > 
> > You can't do that. All you know is open/high/low/close. You don't know what 
> > happened in between.
> > 
> > Consider these two scenarios:
> > 
> > Open, gentle steady decline in price down to -2%.
> > Open, next trade after the open is a 2% drop.
> > 
> > Now, would you still want both an initial buy and a scale in for both 
> > scenarios? How would you know if half the position was bought at -1% and 
> > the other half at -2% (first scenario) vs. all bought at -2% (second 
> > scenario).
> > 
> > If you want intraday trades, you need intraday data.
> > 
> > Mike
> > 
> > --- In [email protected], "jmdeacon" <jmdeacon@> wrote:
> > >
> > > Is it possible to scale in on the same bar?  To make it clear, lets say I 
> > > am using EOD data and I want enter a position as the price pulls back.  
> > > XYZ starts the day at $10 and I want to buy if it loses 1% and scalein to 
> > > double to position if it loses another 1%.  Is there a way to code for 
> > > that to occur on the same bar assuming XYZ traded below $9.80 on the bar 
> > > in question?  I know how to do it with Scalein when it occurs on seperate 
> > > bars?
> > > 
> > > Thanks,
> > > 
> > > John
> > >
> >
>


Reply via email to