Can the position size vary as the program iterates through a bar?  For instance 
can I write

iif(L<limitprice2, positionsize = -20, positionsize = -10);
iif(L<limitprice2, buyprice = (limitprice1+limitprice2)/2,limitprice1);

John

--- In [email protected], "Mike" <sfclimb...@...> wrote:
>
> If you want to do what you are proposing, you don't need CBT.
> 
> Whenever you recognize a "scalein" condition, just set the BuyPrice to the 
> average of buyprice1 and buyprice2, and the position size to double the usual 
> size. The backtester exits all positions (initial and scaled in) at a single 
> Sell signal, so that is effectively what is happening anyway.
> 
> Mike
> 
> --- In [email protected], "jmdeacon" <jmdeacon@> wrote:
> >
> > What I want would not need intraday data.  The way I would want ti code 
> > with OHLC is something like this:
> > 
> > limitprice1 = (ref(c,-1)*0.99);
> > limitprice2 = (ref(c,-1)*0.98);
> > 
> > buyprice1 = min(O,limitprice1);
> > buyprice2 = min(O,limitprice2);
> > 
> > Buy would occur if L < limitprice1.
> > Scalein would occur if L <limitprice2.
> > 
> > If the low is less than the limitprice1, I would enter the position.  If 
> > the low is less than the limitprice2, then I would scalein.  If the open is 
> > below both prices then I would enter a double position at the price of the 
> > open.
> > 
> > I already have this coded to work on seperate bars, but many times, the 
> > pullback occurs on the same bar and I would like to backtest that occuring 
> > on the day of the initial purchase.
> > 
> > So, the question is, is there some kind of CBT coding that would allow me 
> > to test what I want to test.
> > 
> > Thanks,
> > 
> > John
> > --- In [email protected], "Mike" <sfclimbers@> wrote:
> > >
> > > Hi
> > > 
> > > You can't do that. All you know is open/high/low/close. You don't know 
> > > what happened in between.
> > > 
> > > Consider these two scenarios:
> > > 
> > > Open, gentle steady decline in price down to -2%.
> > > Open, next trade after the open is a 2% drop.
> > > 
> > > Now, would you still want both an initial buy and a scale in for both 
> > > scenarios? How would you know if half the position was bought at -1% and 
> > > the other half at -2% (first scenario) vs. all bought at -2% (second 
> > > scenario).
> > > 
> > > If you want intraday trades, you need intraday data.
> > > 
> > > Mike
> > > 
> > > --- In [email protected], "jmdeacon" <jmdeacon@> wrote:
> > > >
> > > > Is it possible to scale in on the same bar?  To make it clear, lets say 
> > > > I am using EOD data and I want enter a position as the price pulls 
> > > > back.  XYZ starts the day at $10 and I want to buy if it loses 1% and 
> > > > scalein to double to position if it loses another 1%.  Is there a way 
> > > > to code for that to occur on the same bar assuming XYZ traded below 
> > > > $9.80 on the bar in question?  I know how to do it with Scalein when it 
> > > > occurs on seperate bars?
> > > > 
> > > > Thanks,
> > > > 
> > > > John
> > > >
> > >
> >
>


Reply via email to