Chuck:
Is your address correct on QRZ?
73 Jim
de W5JO
----- Original Message -----
From: "Chuck Kembring" <[EMAIL PROTECTED]>
To: "Discussion of AM Radio" <amradio@mailman.qth.net>
Sent: Saturday, November 06, 2004 9:10 PM
Subject: RE: [AMRadio] B&W Dial Scale
Jim....
I would love to have a copy! I'd like to get two sonce I have a friend
with
one and it probably needs changed / cleaned-up as well....
Thanks,
73,
Chuck WB3LGG
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jim Wilhite
Sent: Friday, November 05, 2004 8:21 PM
To: Discussion of AM Radio
Subject: Re: [AMRadio] B&W Dial Scale
Hi Chuck:
I carefully removed mine and tried scanning and recreating it but ran into
problems with dirt and the yellow color. I then decided to just run it
through a copy machine and it came out very clear. I have a HP PSC 2410
and
could make the copy on photo paper.
Today I took the photo paper copy to a copy shop here and had him run it
through his copier with 110 lb. card stock. It came out very nice and I
bought some Locktite super glue that as a brush and used that to attach it
to the plate of the VFO.
I can redo the copy and mail it to you if you would like. The copy will
be
on an 8 1/2 inch piece of stock and you would have to trim it to fit your
VFO.
I used a single edge razor blade to remove the old one and it came off in
one piece. I drew the outline on the new one and got it pretty close.
Cost of the copy will be $1.00 plus a 9 X 11 envelop at 10 cents plus
postage which I estimate to be about 85 cents. Let me know.
73 Jim
W5JO
----- Original Message -----
From: "Chuck Kembring" <[EMAIL PROTECTED]>
To: "Discussion of AM Radio" <amradio@mailman.qth.net>
Sent: Friday, November 05, 2004 5:35 PM
Subject: RE: [AMRadio] B&W Dial Scale
Jim....
Mine is pretty shabby, I'd like to get one of your creations! Please give
me the details and thanks.
73,
Chuck Kembring WB3LGG
2901 Highpoint Road
Cochranville, Pa. 19330-1818
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jim Wilhite
Sent: Friday, November 05, 2004 12:32 PM
To: AM Radio Discussion List; Boatanchors Mail List
Subject: [AMRadio] B&W Dial Scale
Some time back I posted to see if anyone had the Dial Scale for a B&W
5100B?
No one had one, so I managed to get mine off and make a copy of it. As I
recall someone was looking for the same thing and because of a computer
glitch, I lost the message.
So if anyone needs a copy, let me know. I will send them to you for the
cost of copy and mail. I had mine made on 110# card stock and it is
pretty
clean and white. Now to just get it on the VFO without screwing up.
73 Jim
W5JO
______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio@mailman.qth.net
______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio@mailman.qth.net
______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio@mailman.qth.net
______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio@mailman.qth.net
