Thanks John, that's a good idea.
Rick

John E. Coleman (ARS WA5BXO) wrote:

Get a high inductance choke (modulation reactor) to shunt the DC out of the
secondary of the modulation XFMR.  It will kill about 75 % of the talk back.
What's left is all second harmonic talk back and it won't feed back.  Did
you ever use an old speaker that required DC to get the magnetism (no
permanent magnet)?  Not much sound comes out until the DC goes in to make
the magnetism for the voice coil to work against.

John,
WA5BXO
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rick Brashear
Sent: Thursday, March 16, 2006 9:43 PM
To: Discussion of AM Radio
Subject: [AMRadio] Modulator feedback

I've posed a couple of questions on some other lists and received some good advice, but I am still in need of more. My BC-610-E has a bad feedback or "talk back" problem. I've placed a capacitor across the overload relay (RY-5) and that did eliminate a little of the talk back. However, with much audio gain at all, not nearly enough to attain 100% modulation, I get feedback. Not just talk back, but feedback. I have to assume it's coming from the modulation transformer. The modulator bias is set for 40 ma as specifications state. The bolts on the modulation transformer are all tight. What am I over looking here? I'm using a BC-614-E speech amplifier with a D-104 non amplified mic. I did a few modifications to the dynamic input circuitry of the BC-614 to better match the D-104, but that is the only modification in either the speech amp or the BC-610-E.

Rick/K5IZ


______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio@mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb



______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio@mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb



Reply via email to