Hi Enzo, Either TNC should work, but I would give the advantage to the Paccomm for AO-51.
73, Mark N8MH At 07:33 PM 3/5/2011 +0100, Vincenzo Mone wrote: >Hi Mark, >Thanks for your help. >I will try on the next Pass ( That will be tomorrow for me ). >I have checked in the wisp setup and I have already set how you said: >PECHO-11 for Broadcast and PECH-12 for BBS callsigns. >As TNC I am using Paccomm Tiny-2 with a NB96 card. >I have also a TNC3S. >Do you think that the TNC3S is better than the Paccomm Tiny-2 with a NB96 >card? >Thanks > >73 de Enzo IK8OZV >EasyLog 5 BetaTester >EasyLog PDA BetaTester >WinBollet BetaTester >D.C.I. CheckPoint Regione Campania >Skype: ik8ozv8520 > > > > > ********************************** > ******* GSM +39 338 9749786 ******* > ****** SMS +39 338 9749786 ****** > ***** FAX +39 328 7244294 ***** > *** 2nd e-mail: vim...@tin.it *** > ********************************* > >> -----Messaggio originale----- >> Da: Mark L. Hammond [mailto:marklhamm...@gmail.com] >> Inviato: sabato 5 marzo 2011 15.52 >> A: Vincenzo Mone; Amsat - BBs >> Oggetto: Re: [amsat-bb] AO-51 and L/U PacSat BBS Mode >> >> Hello Enzo, >> >> Yes, the 9k6 BBS is operational and working. >> >> Please adjust your uplink freqency (try UP and DOWN in 500 Hz or 1 kHz >> steps) and see if that helps. Most users report that a high gain antenna >with >> 10-50 Watts power at the antenna for the L-band uplink results in success. >> >> I find 1268.705 works best for me, sometimes even .708. >> >> Also please check your AO-51 setup in Wisp/Satellite Setup. Broadcast >> Callsign must be PECHO-11 and BBS Callsign must be PECHO-12. >> >> There is no other active/functional BBS bird at 9k6, nor any with 1.2 GHz >> uplinks. >> >> Also---what TNC are you using for 9k6? I found out many years ago that >AO- >> 51 does not like the transmitted signal from my TAPR EVM56k DSP unit, so >it >> rarely if ever heard me. >> >> 73, >> >> Mark N8MH >> >> At 02:52 PM 3/5/2011 +0100, Vincenzo Mone wrote: >> >Hi Folks, >> >I am trying the bird on: >> >9k6 BBS and Telemetry. >> >Does it work? >> >With the MSPE I can just receive numbers like: >> > >> >B:44253341 >> > >> >What does it mean? >> >I am trying to request the DIR on 1268.700 MHz, but I do not get any >> >response. >> >On the upper side of the MSPE program often I can read: >> > >> > Frames Heard from PACB-1 >> > >> >I am asking this because I would like to see if my system still works. >> >Is there any other Bird that I can use the 1.2 GHz Band? >> >Any help will be really appreciated >> >Thanks in advance. >> > >> >73 de Enzo IK8OZV >> >EasyLog 5 BetaTester >> >EasyLog PDA BetaTester >> >WinBollet BetaTester >> >D.C.I. CheckPoint Regione Campania >> >Skype: ik8ozv8520 >> > >> > >> > >> > >> > *************************************** >> > ***** GSM +39 338 9749786 ***** >> > ***** SMS +39 338 9749786 ***** >> > ***** FAX +39 328 7244294 ***** >> > *** 2nd e-mail: vim...@tin.it *** >> > *************************************** >> > >> > >> >73 de Enzo IK8OZV >> >EasyLog 5 BetaTester >> >EasyLog PDA BetaTester >> >WinBollet BetaTester >> >D.C.I. CheckPoint Regione Campania >> >Skype: ik8ozv8520 >> > >> > >> > >> > >> > ********************************** >> > ******* GSM +39 338 9749786 ******* >> > ****** SMS +39 338 9749786 ****** >> > ***** FAX +39 328 7244294 ***** >> > *** 2nd e-mail: vim...@tin.it *** >> > ********************************* >> > >> > >> >_______________________________________________ >> >Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the >> author. >> >Not an AMSAT-NA member? Join now to support the amateur satellite >> program! >> >Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
