>From the link you posted looks like I have to use the TNC-MB96 and PSK-1 >together to use it for regular 9.6k packet but I'm sure the TNC-MB96 could >work by itself. I'll look at the jumper settings..ect and see what I can >findout. Sure wish there were some birds up that I could use this with. Thanks for the reply, 73 Mike kb5wbh ----- Original Message ----- From: Stefan Wagener To: Mike Nettles Sent: Saturday, June 15, 2013 7:57 AM Subject: Re: [amsat-bb] psk-1 tnc-nb96 question
Looking at this: http://www.amsat.org/amsat/archive/amsat-bb/200003/msg00528.html it looks like it should work. Stefan On Fri, Jun 14, 2013 at 10:44 PM, Mike Nettles <[email protected]> wrote: I picked this up a while back and it came with all the docs, jumper info..ect. Can these be used for 9.6k baud regular packet? I hooked up the tnc and it comes on with WA8DED Tnc Firmware V 2.6 . If it can be used for regular packet can that firmware be replaced? Thanks 73 Mike kb5wbh _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
