Hi Guoyin, i have tested it long back with opencore 1.0 code, but i think in opencore 2.0 they have changed this enum.( i did not use it with opencore 2.0 code) according this file you are using correct test case number, not sure what could be the problem?
may i know what exactly the error is? what error message you are getting? Thanks On Mon, May 18, 2009 at 4:38 PM, waterblood <guoyin.c...@gmail.com> wrote: > > Hi sudhir, > > Thanks for your reply. I am a bit confused by the test case number: > I canot find the test case number 29 in PVAETestCase which defined in > test_pv_author_engine_typedefs.h > typedef enum > { > > /*********** Compressed Tests Begin****************************/ > // Tests that take compressed inputs > //3gp output file > AMR_Input_AOnly_3gpTest = 0, > //.amr > H263_Input_VOnly_3gpTest = 1, > //.h263 > AMR_YUV_Input_AV_3gpTest = 2, > //.amr+.yuv > AMR_H263_Input_AV_3gpTest = 3, > //.amr+.h263 > > H264_AMR_Input_AV_3gpTest = 4, > //.yuv > AMR_YUV_Input_AV_M4V_AMR_Output_3gpTest = 5, > //.amr+.yuv > TEXT_Input_TOnly_3gpTest = 6, > AMR_TEXT_Input_AT_3gpTest = 7, > ..... > } PVAETestCase; > > How i know which test case should be run here? > > Thanks > Guoyin Chen > > > On May 18, 3:13 pm, sudhir vyas <sudhirvya...@gmail.com> wrote: > > Hi, > > > > I have used test_pvauthorengine for audio encoding,here is the > explanation: > > > > PvAuthorEngine for Audio Encoder (AMR-NB) of raw pcm data/ file: > > > > (You can change the parameter according to your test case choice) > > > > # test_pvauthorengine > > > > *OR * > > > > # test_pvauthorengine -test 29 29 -audio <TestPcmFile>.pcm > -audioconfigfile > > *<AudioConfigurationFile>*.txt -output <OutputFileName>.amr -logfile > -logall > > > > (Test range 29 29 is used for pcm data as an input and amr file as an > > outputtest case) > > > > Make sure that before executing above command you have created an audio > > configuration file which will contain configuration parameters of for > audio > > encoding. It is just a text file which you will save in current directory > > and in that file following lines should be mentioned: > > > > SamplingRate=44100 (you can specify any valid sampling rate) > > > > NumChannels=2 (you can specify any valid NumChannels) > > > > In same way if you are going to use video file also as an input in > PvAuthor > > test command, you will have to create video config text file. In video > > config file below lines should be mentioned: > > > > width=176 (you can specify any valid width) > > > > height=144 (you can specify any valid height) > > > > fps=15 (you can specify any valid number of > > frames per seconds) > > > > iframeinterval=15 (you can specify any valid > frameinterval) > > > > Above command will generate an output amr file with specified name at > > current location. > > > > On Mon, May 18, 2009 at 3:59 PM, waterblood <guoyin.c...@gmail.com> > wrote: > > > > > Hi All, > > > > > I can not find any document describe the parameters of this > > > test_pvauthorengine. Here, I just want to run a basic test, which > > > input file is video yuv file, and output is a 3gp file. Below is my > > > command line which I assume from the source code of > > > test_pvauthorengine. But failed to run. If you have any idea how to > > > run it, please let me know. Thanks in advance. > > > > > test_pvauthorengine -test 203 203 -video /sdcard/yuv/akiyo.qcif.yuv - > > > output /sdcard/yuv/akiyo.qcif.3gp -videoconfigfile > > > qcif_15fps_iframe15.cfg -encV 2 > > > > > Best Regards > > > Guoyin Chen > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "android-framework" group. To post to this group, send email to android-framework@googlegroups.com To unsubscribe from this group, send email to android-framework+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/android-framework?hl=en -~----------~----~----~----~------~----~------~--~---