Hi. As far as I know, board-msm8x60.c is right file.
2012년 4월 16일 월요일 오후 7시 37분 56초 UTC+9, Johnson Pinto 님의 말: > > I have a qualacoms's dragonboard APQ8060 board. when i build it says > the TARGET_PRODUCT is 'msm8660_surf'. > i would like to communicate with the irq and the i2c lines of the > sensors part. > i just tried to find out which files are used by this > board(tartet_product), so i used some 'printk' statements in the files > and tried to fastboot the board using the obtained "boot.img". The > files where I used the printk are: > board-msm8x60.c, board-qt8660.c and devices-msm8x60.c( are in 'kernel/ > arch/arm/mach-msm/') > After I fastboot the board, I don't see any of my printk messages > printed > in the log. > Am I using the right files for this board ? if it is wrong can anyone > suggest me the right files ? > > Thanks 2012년 4월 16일 월요일 오후 7시 37분 56초 UTC+9, Johnson Pinto 님의 말: > > I have a qualacoms's dragonboard APQ8060 board. when i build it says > the TARGET_PRODUCT is 'msm8660_surf'. > i would like to communicate with the irq and the i2c lines of the > sensors part. > i just tried to find out which files are used by this > board(tartet_product), so i used some 'printk' statements in the files > and tried to fastboot the board using the obtained "boot.img". The > files where I used the printk are: > board-msm8x60.c, board-qt8660.c and devices-msm8x60.c( are in 'kernel/ > arch/arm/mach-msm/') > After I fastboot the board, I don't see any of my printk messages > printed > in the log. > Am I using the right files for this board ? if it is wrong can anyone > suggest me the right files ? > > Thanks 2012년 4월 16일 월요일 오후 7시 37분 56초 UTC+9, Johnson Pinto 님의 말: > > I have a qualacoms's dragonboard APQ8060 board. when i build it says > the TARGET_PRODUCT is 'msm8660_surf'. > i would like to communicate with the irq and the i2c lines of the > sensors part. > i just tried to find out which files are used by this > board(tartet_product), so i used some 'printk' statements in the files > and tried to fastboot the board using the obtained "boot.img". The > files where I used the printk are: > board-msm8x60.c, board-qt8660.c and devices-msm8x60.c( are in 'kernel/ > arch/arm/mach-msm/') > After I fastboot the board, I don't see any of my printk messages > printed > in the log. > Am I using the right files for this board ? if it is wrong can anyone > suggest me the right files ? > > Thanks 2012년 4월 16일 월요일 오후 7시 37분 56초 UTC+9, Johnson Pinto 님의 말: > > I have a qualacoms's dragonboard APQ8060 board. when i build it says > the TARGET_PRODUCT is 'msm8660_surf'. > i would like to communicate with the irq and the i2c lines of the > sensors part. > i just tried to find out which files are used by this > board(tartet_product), so i used some 'printk' statements in the files > and tried to fastboot the board using the obtained "boot.img". The > files where I used the printk are: > board-msm8x60.c, board-qt8660.c and devices-msm8x60.c( are in 'kernel/ > arch/arm/mach-msm/') > After I fastboot the board, I don't see any of my printk messages > printed > in the log. > Am I using the right files for this board ? if it is wrong can anyone > suggest me the right files ? > > Thanks 2012년 4월 16일 월요일 오후 7시 37분 56초 UTC+9, Johnson Pinto 님의 말: > > I have a qualacoms's dragonboard APQ8060 board. when i build it says > the TARGET_PRODUCT is 'msm8660_surf'. > i would like to communicate with the irq and the i2c lines of the > sensors part. > i just tried to find out which files are used by this > board(tartet_product), so i used some 'printk' statements in the files > and tried to fastboot the board using the obtained "boot.img". The > files where I used the printk are: > board-msm8x60.c, board-qt8660.c and devices-msm8x60.c( are in 'kernel/ > arch/arm/mach-msm/') > After I fastboot the board, I don't see any of my printk messages > printed > in the log. > Am I using the right files for this board ? if it is wrong can anyone > suggest me the right files ? > > Thanks 2012년 4월 16일 월요일 오후 7시 37분 56초 UTC+9, Johnson Pinto 님의 말: > > I have a qualacoms's dragonboard APQ8060 board. when i build it says > the TARGET_PRODUCT is 'msm8660_surf'. > i would like to communicate with the irq and the i2c lines of the > sensors part. > i just tried to find out which files are used by this > board(tartet_product), so i used some 'printk' statements in the files > and tried to fastboot the board using the obtained "boot.img". The > files where I used the printk are: > board-msm8x60.c, board-qt8660.c and devices-msm8x60.c( are in 'kernel/ > arch/arm/mach-msm/') > After I fastboot the board, I don't see any of my printk messages > printed > in the log. > Am I using the right files for this board ? if it is wrong can anyone > suggest me the right files ? > > Thanks -- unsubscribe: android-kernel+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-kernel