Hi I am waiting to get the permission from my boss. Once I will get the reply, I will upload it. Till that time, if you had any specific problems, I can help you to resolve them
Regards Ananth On 1/21/09, Ananth M <mekaana...@gmail.com> wrote: > Hi > I am waiting to get the permission from my boss. > Once I will get the reply, I will upload it. > > Regards > Ananth > > On 1/21/09, Praveen <praveendr...@gmail.com> wrote: >> >> Hi Ananth, >> >> It Works!. will it be possible for you upload the samsung related >> stuffs and the android patch you have applied to 2.6.25 linux kernel? >> >> On Jan 21, 4:48 pm, srinath <mail2srina...@gmail.com> wrote: >>> Hi Ananth, >>> >>> Thanks,It was working for me. Will it possible for you to upload the >>> samsung + android patch you have applied to the stock linux 2.6.25 >>> kernel ? or can u explain how you upgraded the kernel to 2.6.25.Only >>> samsung linux kernel 2.6.21.5 is getting booted up on this board other >>> than yours.Can u guide me on this >>> >>> On Jan 21, 3:08 pm, Ananth M <mekaana...@gmail.com> wrote: >>> >>> > Hi Praveen, >>> >>> > Are you able to get the Android Screen on your Board using the my >>> > Kernel Image and File system? >>> >>> > Regards >>> > Ananth >>> >>> > On 1/21/09, Praveen <praveendr...@gmail.com> wrote: >>> >>> > > Hi Ananth, >>> >>> > > Thanks for all your help.Can you please upload the samsung + android >>> > > patches you have applied to the 2.6.25 linux kernel to get it booted >>> > > up on smdk6400? >>> >>> > > On Jan 20, 1:34 pm, "Ananth M" <mekaana...@gmail.com> wrote: >>> > >> Hi Abhishek >>> > >> Today I uploaded the kernel and file systems that I am using to >>> > >> my >>> > >> website. >>> > >> I created a blog also in the same website. ( this is my first >>> > >> blog, >>> > >> so forgive me if there is any mistakes ) >>> > >> The blog is at : >>> > >> http://mekaananth.synthasite.com/android-onto-smdk6400.php >>> >>> > >> Please let me know for any help or issues >>> >>> > >> Regards >>> > >> Ajay >>> >>> > >> On 1/20/09, sumit <getabhisheksrivast...@gmail.com> wrote: >>> >>> > >> > hi Ajay >>> >>> > >> > I had interacted with you about porting Android in smdk6400 and >>> > >> > found >>> > >> > your suggestions useful. I have gone through your recent posting >>> > >> > and >>> > >> > found that you have successfully ported the kernel and file >>> > >> > system >>> > >> > onto the board.Congratulations. >>> >>> > >> > In our porting affort, I am facing the issue that zimage does not >>> > >> > boot >>> > >> > where as image starts booting. I checked through zImage booting >>> > >> > sequence and found that arch/arm/boot/head.S is the first file >>> > >> > which >>> > >> > gets executed. This file has ATAG structure (which I guess is for >>> > >> > passing parameters from boot loader to the kernel). I am using >>> > >> > the >>> > >> > 2.6.23 kernel and bootloader is uboot 1.1.6. I suspect the >>> > >> > problem >>> > >> > is >>> > >> > with uboot configuration (which was built to handle kernel >>> > >> > version >>> > >> > 2.6.21 was not handling ATAG though uboot 1.1.1 has support for >>> > >> > ATAG) . Please let me know if this thinking is correct and your >>> > >> > suggestions on sorting out the problem. >>> >>> > >> > And I also want to know if the file system from new Android 1.0 >>> > >> > sdk >>> > >> > will support 2.6.23 kernel . >>> >>> > >> > regards >>> >>> > >> > Abhishek >>> >>> > >> > On Dec 11 2008, 11:07 am, ajay <mekaana...@gmail.com> wrote: >>> > >> >> Hi All >>> >>> > >> >> I ported the Android-mc14 and Android-mc20 onto s3c6400 >>> > >> >> earlier. >>> >>> > >> >> Currently I am poritng the Android1.0 on to the same Board >>> > >> >> with >>> > >> >> the following config: >>> > >> >> - Kernel : Linux-2.6.25 >>> > >> >> - File systems : Taken from the Android 1.0 >>> >>> > >> >> The Board is booted properly and the initial screen is >>> > >> >> displayed. >>> >>> > >> >> Now my problem is that the initial screen is the screen with >>> > >> >> "Andrid " >>> > >> >> "11:25 AM " >>> > >> >> " Charging 100 %" >>> > >> >> "Screen Locked >>> > >> >> (Press Menu to unlock the screen" >>> >>> > >> >> Since the board is booted without any SKIN's , I do not >>> > >> >> have >>> > >> >> the Menu button to unlock the screen. >>> >>> > >> >> 1) Is it possible to boot the board with SKIN's ? >>> > >> >> 2) Is it possible to by-pass this screen-lock screen ? >>> >>> > >> >> 3) In the emulator of Android1.0, if we start the emulator >>> > >> >> with "- >>> > >> >> noskin" option , you will get the same screen. ( i.e without any >>> > >> >> menu >>> > >> >> button". In that case, how can the user un-locks the screen ? >>> >>> > >> >> Can anyone provide some information regarding this ? >>> >>> > >> >> Thank you >>> > >> >> RegardsAjay >> >> >> > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
