hi now i have build dalvik virtual macihine and this dvm binary copied in cramfs file system , but it does not work and giving error i gave the cammand ./dalvikvm -classpath /etc/main.class
Dalvik VM init failed (check log file)\n in system/bin i have cpoeid only dalvikvm ,i think it will lookinf for some other dalvik binary if i am right telll me which binary i used for regards Abhishek On 1/20/09, Ananth M <mekaana...@gmail.com> wrote: > > Hi Abhishek > Today I uploaded the kernel and file systems that I am using to my website. > I created a blog also in the same website. ( this is my first blog, > so forgive me if there is any mistakes ) > The blog is at : > http://mekaananth.synthasite.com/android-onto-smdk6400.php > > > Please let me know for any help or issues > > Regards > Ajay > > > On 1/20/09, sumit <getabhisheksrivast...@gmail.com> wrote: > > > > hi Ajay > > > > I had interacted with you about porting Android in smdk6400 and found > > your suggestions useful. I have gone through your recent posting and > > found that you have successfully ported the kernel and file system > > onto the board.Congratulations. > > > > In our porting affort, I am facing the issue that zimage does not boot > > where as image starts booting. I checked through zImage booting > > sequence and found that arch/arm/boot/head.S is the first file which > > gets executed. This file has ATAG structure (which I guess is for > > passing parameters from boot loader to the kernel). I am using the > > 2.6.23 kernel and bootloader is uboot 1.1.6. I suspect the problem is > > with uboot configuration (which was built to handle kernel version > > 2.6.21 was not handling ATAG though uboot 1.1.1 has support for > > ATAG) . Please let me know if this thinking is correct and your > > suggestions on sorting out the problem. > > > > And I also want to know if the file system from new Android 1.0 sdk > > will support 2.6.23 kernel . > > > > regards > > > > Abhishek > > > > > > > > On Dec 11 2008, 11:07 am, ajay <mekaana...@gmail.com> wrote: > >> Hi All > >> > >> I ported the Android-mc14 and Android-mc20 onto s3c6400 earlier. > >> > >> Currently I am poritng the Android1.0 on to the same Board with > >> the following config: > >> - Kernel : Linux-2.6.25 > >> - File systems : Taken from the Android 1.0 > >> > >> The Board is booted properly and the initial screen is displayed. > >> > >> Now my problem is that the initial screen is the screen with > >> "Andrid " > >> "11:25 AM " > >> " Charging 100 %" > >> "Screen Locked > >> (Press Menu to unlock the screen" > >> > >> Since the board is booted without any SKIN's , I do not have > >> the Menu button to unlock the screen. > >> > >> 1) Is it possible to boot the board with SKIN's ? > >> 2) Is it possible to by-pass this screen-lock screen ? > >> > >> 3) In the emulator of Android1.0, if we start the emulator with "- > >> noskin" option , you will get the same screen. ( i.e without any menu > >> button". In that case, how can the user un-locks the screen ? > >> > >> Can anyone provide some information regarding this ? > >> > >> Thank you > >> RegardsAjay > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---