have a simpler init, like init=/system/bin/sh first, then run init from the console, doing a /init & may be after doing a logcat, You will have more info as to why it fails.
2009/4/16 hari uppalapati <hari.andr...@gmail.com> > hi > try with the following bootargs > setenv bootargs console=ttyS2,115200n8 noinitrd root=/dev/mmcblk0p2 > video=omapfb:mode:1280x...@50 init=/init rw rootdelay=1 nohz=off > regards > Haritha > > 2009/4/15 Skuld <skul...@gmail.com> > > >> Dear Rupesh: >> >> My manifest file are form Android.git.kernel.org. >> Can't I latest new version ? >> My boot command : >> console=ttyS2,115200n8 console=ttyS0 noinitrd root=/dev/mmcblk0p2 >> rootfstype=ext3 rw rootdelay=3 nohz=off init=/init >> >> I boot system with SD card and linux file system in SD partition 2. >> Thank you >> >> >> On 4月15日, 下午10時09分, Rupesh Gujare <rupeshguj...@gmail.com> wrote: >> > Did you replaced manifest file withhttp:// >> labs.embinux.org/images/9/91/Manifest18032009.xml? What are your >> > boot args ? >> > >> > -- >> > Rupesh Gujare >> > >> > On Wed, Apr 15, 2009 at 10:43 AM, Skuld <skul...@gmail.com> wrote: >> > >> > > Hi : >> > >> > > I base >> > > >> http://labs.embinux.org/index.php/Android_Porting_Guide_to_Beagle_Board >> > > steps to port Android System to beagle board. >> > > I download android source code on 2009/04/09. >> > > It boot kernel and execute init file happen error message. >> > >> > > How to fix it? Or any suggestions? >> > >> > > Error Message: >> > >> > > Starting kernel ... >> > >> > > Uncompressing >> > >> > > >> Linux............................................................................................................................... >> > > done, booting the kernel. >> > >> > > Linux version 2.6.27-omap1-05246-g5d103de-dirty (sk...@skuld-desktop) >> > > (gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)) #1 Wed >> > > Apr 15 10:04:06 CST 2009 >> > >> > > CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=00c5387f >> > >> > > Machine: OMAP3 Beagle Board >> > >> > > Memory policy: ECC disabled, Data cache writeback >> > >> > > OMAP3430 ES2.1 >> > >> > > SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000 >> > >> > > CPU0: L1 I VIPT cache. Caches unified at level 2, coherent at level 3 >> > >> > > CPU0: Level 1 cache is separate instruction and data >> > >> > > CPU0: I cache: 16384 bytes, associativity 4, 64 byte lines, 64 sets, >> > >> > > supports RA >> > >> > > CPU0: D cache: 16384 bytes, associativity 4, 64 byte lines, 64 sets, >> > >> > > supports RA WB WT >> > >> > > CPU0: Level 2 cache is unified >> > >> > > CPU0: unified cache: 262144 bytes, associativity 8, 64 byte lines, 512 >> > > sets, >> > >> > > supports WA RA WB WT >> > >> > > Built 1 zonelists in Zone order, mobility grouping on. Total pages: >> > > 32512 >> > >> > > Kernel command line: console=ttyS2,115200n8 console=ttyS0 noinitrd >> > > root=/dev/mmcblk0p2 rootfstype=ext3 rw rootdelay=3 nohz=off init=/init >> > > omapfb.video_mode=1366x768mr...@69 omapfb.debug=y >> > >> > > Unknown boot option `omapfb.video_mode=1366x768mr...@69': ignoring >> > >> > > Unknown boot option `omapfb.debug=y': ignoring >> > >> > > clock: virt_vdd1_prcm_set: missing clockdomain<3>clock: >> > > virt_vdd2_prcm_set: missing clockdomain<6>Clocking rate (Crystal/DPLL/ >> > > ARM core): 26.0/332/500 MHz >> > >> > > resource_request: Invalid resource name >> > >> > > GPMC revision 5.0 >> > >> > > IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts >> > >> > > Total of 96 interrupts on 1 active controller >> > >> > > OMAP34xx GPIO hardware version 2.5 >> > >> > > PID hash table entries: 512 (order: 9, 2048 bytes) >> > >> > > OMAP clockevent source: GPTIMER12 at 32768 Hz >> > >> > > Console: colour dummy device 80x30 >> > >> > > Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) >> > >> > > Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >> > >> > > Memory: 128MB = 128MB total >> > >> > > Memory: 125296KB available (3652K code, 668K data, 148K init) >> > >> > > Calibrating delay loop... 498.87 BogoMIPS (lpj=1945600) >> > >> > > Mount-cache hash table entries: 512 >> > >> > > CPU: Testing write buffer coherency: ok >> > >> > > net_namespace: 288 bytes >> > >> > > NET: Registered protocol family 16 >> > >> > > resource_request: Invalid resource name >> > >> > > Found NAND on CS0 >> > >> > > Registering NAND on CS0 >> > >> > > Switched to new clocking rate (Crystal/DPLL3/MPU): 26.0/332/166 MHz >> > >> > > OMAP DMA hardware revision 4.0 >> > >> > > USB: No board-specific platform config found >> > >> > > i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz >> > >> > > twl4030: PIH (irq 7) chaining IRQs 368..375 >> > >> > > twl4030: power (irq 373) chaining IRQs 376..383 >> > >> > > twl4030: gpio (irq 368) chaining IRQs 384..401 >> > >> > > i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz >> > >> > > twl4030_usb twl4030_usb: Initialized TWL4030 USB module >> > >> > > SCSI subsystem initialized >> > >> > > usbcore: registered new interface driver usbfs >> > >> > > usbcore: registered new interface driver hub >> > >> > > usbcore: registered new device driver usb >> > >> > > musb_hdrc: version 6.0, musb-dma, host, debug=0 >> > >> > > musb_hdrc: USB Host mode controller at d80ab000 using DMA, IRQ 92 >> > >> > > musb_hdrc musb_hdrc: MUSB HDRC host driver >> > >> > > musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 >> > >> > > usb usb1: configuration #1 chosen from 1 choice >> > >> > > hub 1-0:1.0: USB hub found >> > >> > > hub 1-0:1.0: 1 port detected >> > >> > > NET: Registered protocol family 2 >> > >> > > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >> > >> > > TCP established hash table entries: 4096 (order: 3, 32768 bytes) >> > >> > > TCP bind hash table entries: 4096 (order: 2, 16384 bytes) >> > >> > > TCP: Hash tables configured (established 4096 bind 4096) >> > >> > > TCP reno registered >> > >> > > NET: Registered protocol family 1 >> > >> > > NetWinder Floating Point Emulator V0.97 (double precision) >> > >> > > ashmem: initialized >> > >> > > VFS: Disk quotas dquot_6.5.1 >> > >> > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >> > >> > > JFFS2 version 2.2. (NAND) (c) 2001-2006 Red Hat, Inc. >> > >> > > msgmni has been set to 245 >> > >> > > io scheduler noop registered >> > >> > > io scheduler anticipatory registered (default) >> > >> > > io scheduler deadline registered >> > >> > > io scheduler cfq registered >> > >> > > omapfb: configured for panel omap3beagle >> > >> > > omapfb: DISPC version 3.0 initialized >> > >> > > Console: switching to colour frame buffer device 160x45 >> > >> > > omapfb: Framebuffer initialized. Total vram 3686400 planes 1 >> > >> > > omapfb: Pixclock 72000 kHz hfreq 50.0 kHz vfreq 67.4 Hz >> > >> > > Serial: 8250/16550 driver4 ports, IRQ sharing enabled >> > >> > > serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 >> > >> > > serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 >> > >> > > serial8250.0: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 >> > >> > > console [ttyS2] enabled >> > >> > > brd: module loaded >> > >> > > loop: module loaded >> > >> > > logger: created 64K log 'log_main' >> > >> > > logger: created 256K log 'log_events' >> > >> > > logger: created 64K log 'log_radio' >> > >> > > usb 1-1: new high speed USB device using musb_hdrc and address 2 >> > >> > > usb 1-1: configuration #1 chosen from 1 choice >> > >> > > hub 1-1:1.0: USB hub found >> > >> > > hub 1-1:1.0: 4 ports detected >> > >> > > usb 1-1.1: new high speed USB device using musb_hdrc and address 3 >> > >> > > usb 1-1.1: configuration #1 chosen from 1 choice >> > >> > > usb 1-1.3: new low speed USB device using musb_hdrc and address 4 >> > >> > > usb 1-1.3: configuration #1 chosen from 1 choice >> > >> > > eth0: register 'asix' at usb-musb_hdrc-1.1, ASIX AX88772A USB 2.0 >> > > Ethernet, 00:08:54:a6:6d:25 >> > >> > > usbcore: registered new interface driver asix >> > >> > > usbcore: registered new interface driver cdc_ether >> > >> > > usbcore: registered new interface driver dm9601 >> > >> > > usbcore: registered new interface driver net1080 >> > >> > > usbcore: registered new interface driver cdc_subset >> > >> > > usbcore: registered new interface driver zaurus >> > >> > > Linux video capture interface: v2.00 >> > >> > > usbcore: registered new interface driver uvcvideo >> > >> > > USB Video Class driver (v0.1.0) >> > >> > > i2c /dev entries driver >> > >> > > Driver 'sd' needs updating - please use bus_type methods >> > >> > > omap2-nand driver initializing >> > >> > > NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron NAND 128MiB >> > > 1,8V 16-bit) >> > >> > > cmdlinepart partition parsing not available >> > >> > > Creating 5 MTD partitions on "omap2-nand": >> > >> > > 0x00000000-0x00080000 : "X-Loader" >> > >> > > 0x00080000-0x00260000 : "U-Boot" >> > >> > > 0x00260000-0x00280000 : "U-Boot Env" >> > >> > > 0x00280000-0x00680000 : "Kernel" >> > >> > > 0x00680000-0x08000000 : "File System" >> > >> > > usbmon: debugfs is not available >> > >> > > mice: PS/2 mouse device common for all mice >> > >> > > usbcore: registered new interface driver usbtouchscreen >> > >> > > twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0 >> > >> > > twl4030_rtc twl4030_rtc: Power up reset detected. >> > >> > > twl4030_rtc twl4030_rtc: Enabling TWL4030-RTC. >> > >> > > OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec >> > >> > > cpuidle: using governor menu >> > >> > > input: Logitech USB Receiver as /class/input/input0 >> > >> > > input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb- >> > > musb_hdrc-1.3 >> > >> > > Fixing up Logitech keyboard report descriptor >> > >> > > input: Logitech USB Receiver as /class/input/input1 >> > >> > > input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb- >> > > musb_hdrc-1.3 >> > >> > > usbcore: registered new interface driver usbhid >> > >> > > usbhid: v2.6:USB HID core driver >> > >> > > Advanced Linux Sound Architecture Driver Version 1.0.17. >> > >> > > ASoC version 0.13.2 >> > >> > > OMAP3 Beagle SoC init >> > >> > > TWL4030 Audio Codec init >> > >> > > asoc: twl4030 <-> omap-mcbsp-dai mapping ok >> > >> > > ALSA device list: >> > >> > > #0: omap3beagle (twl4030) >> > >> > > TCP cubic registered >> > >> > > NET: Registered protocol family 17 >> > >> > > NET: Registered protocol family 15 >> > >> > > RPC: Registered udp transport module. >> > >> > > RPC: Registered tcp transport module. >> > >> > > Power Management for TI OMAP3. >> > >> > > SmartReflex driver initialized >> > >> > > Disabling unused clock "sr2_fck" >> > >> > > Disabling unused clock "sr1_fck" >> > >> > > Disabling unused clock "mcbsp_fck" >> > >> > > Disabling unused clock "mcbsp_fck" >> > >> > > Disabling unused clock "mcbsp_fck" >> > >> > > Disabling unused clock "mcbsp_ick" >> > >> > > Disabling unused clock "mcbsp_ick" >> > >> > > Disabling unused clock "mcbsp_ick" >> > >> > > Disabling unused clock "gpt2_ick" >> > >> > > Disabling unused clock "gpt3_ick" >> > >> > > Disabling unused clock "gpt4_ick" >> > >> > > Disabling unused clock "gpt5_ick" >> > >> > > Disabling unused clock "gpt6_ick" >> > >> > > Disabling unused clock "gpt7_ick" >> > >> > > Disabling unused clock "gpt8_ick" >> > >> > > Disabling unused clock "gpt9_ick" >> > >> > > Disabling unused clock "wdt3_ick" >> > >> > > Disabling unused clock "wdt3_fck" >> > >> > > Disabling unused clock "gpio2_dbck" >> > >> > > Disabling unused clock "gpio3_dbck" >> > >> > > Disabling unused clock "gpio4_dbck" >> > >> > > Disabling unused clock "gpio5_dbck" >> > >> > > Disabling unused clock "gpio6_dbck" >> > >> > > Disabling unused clock "gpt9_fck" >> > >> > > Disabling unused clock "gpt8_fck" >> > >> > > Disabling unused clock "gpt7_fck" >> > >> > > Disabling unused clock "gpt6_fck" >> > >> > > Disabling unused clock "gpt5_fck" >> > >> > > Disabling unused clock "gpt4_fck" >> > >> > > Disabling unused clock "gpt3_fck" >> > >> > > Disabling unused clock "gpt2_fck" >> > >> > ... >> > >> > 閱讀更多 >> >> >> > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---