Hi Rupesh: I will try old version.Thank your suggestion. Could you tell me to play audio with old version?
On 4月17日, 下午2時30分, Rupesh Gujare <rupesh.guj...@embinux.com> wrote: > Hi, > > Skuld wrote: > > Dear Rupesh: > > > My manifest file are form Android.git.kernel.org. > > Can't I latest new version ? > > Latest manifest file from android was creating some problems for me > while booting up android, hence I will recommend older version of build. > (which you can get by replacing manifest file). > > -- > Rupesh Gujarehttp://embinux.com > > > My boot command : > > console=ttyS2,115200n8 console=ttyS0 noinitrd root=/dev/mmcblk0p2 > > rootfstype=ext3 rw rootdelay=3 nohz=off init=/init > > > I boot system with SD card and linux file system in SD partition 2. > > Thank you > > > On 4月15日, 下午10時09分, Rupesh Gujare <rupeshguj...@gmail.com> wrote: > > >> Did you replaced manifest file > >> withhttp://labs.embinux.org/images/9/91/Manifest18032009.xml?What are your > >> boot args ? > > >> -- > >> Rupesh Gujare > > >> On Wed, Apr 15, 2009 at 10:43 AM, Skuld <skul...@gmail.com> wrote: > > >>> Hi : > > >>> I base > >>>http://labs.embinux.org/index.php/Android_Porting_Guide_to_Beagle_Board > >>> steps to port Android System to beagle board. > >>> I download android source code on 2009/04/09. > >>> It boot kernel and execute init file happen error message. > > >>> How to fix it? Or any suggestions? > > >>> Error Message: > > >>> Starting kernel ... > > >>> Uncompressing > > >>> Linux............................................................................................................................... > >>> done, booting the kernel. > > >>> Linux version 2.6.27-omap1-05246-g5d103de-dirty (sk...@skuld-desktop) > >>> (gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)) #1 Wed > >>> Apr 15 10:04:06 CST 2009 > > >>> CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=00c5387f > > >>> Machine: OMAP3 Beagle Board > > >>> Memory policy: ECC disabled, Data cache writeback > > >>> OMAP3430 ES2.1 > > >>> SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000 > > >>> CPU0: L1 I VIPT cache. Caches unified at level 2, coherent at level 3 > > >>> CPU0: Level 1 cache is separate instruction and data > > >>> CPU0: I cache: 16384 bytes, associativity 4, 64 byte lines, 64 sets, > > >>> supports RA > > >>> CPU0: D cache: 16384 bytes, associativity 4, 64 byte lines, 64 sets, > > >>> supports RA WB WT > > >>> CPU0: Level 2 cache is unified > > >>> CPU0: unified cache: 262144 bytes, associativity 8, 64 byte lines, 512 > >>> sets, > > >>> supports WA RA WB WT > > >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: > >>> 32512 > > >>> Kernel command line: console=ttyS2,115200n8 console=ttyS0 noinitrd > >>> root=/dev/mmcblk0p2 rootfstype=ext3 rw rootdelay=3 nohz=off init=/init > >>> omapfb.video_mode=1366x768mr...@69 omapfb.debug=y > > >>> Unknown boot option `omapfb.video_mode=1366x768mr...@69': ignoring > > >>> Unknown boot option `omapfb.debug=y': ignoring > > >>> clock: virt_vdd1_prcm_set: missing clockdomain<3>clock: > >>> virt_vdd2_prcm_set: missing clockdomain<6>Clocking rate (Crystal/DPLL/ > >>> ARM core): 26.0/332/500 MHz > > >>> resource_request: Invalid resource name > > >>> GPMC revision 5.0 > > >>> IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts > > >>> Total of 96 interrupts on 1 active controller > > >>> OMAP34xx GPIO hardware version 2.5 > > >>> PID hash table entries: 512 (order: 9, 2048 bytes) > > >>> OMAP clockevent source: GPTIMER12 at 32768 Hz > > >>> Console: colour dummy device 80x30 > > >>> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > > >>> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > > >>> Memory: 128MB = 128MB total > > >>> Memory: 125296KB available (3652K code, 668K data, 148K init) > > >>> Calibrating delay loop... 498.87 BogoMIPS (lpj=1945600) > > >>> Mount-cache hash table entries: 512 > > >>> CPU: Testing write buffer coherency: ok > > >>> net_namespace: 288 bytes > > >>> NET: Registered protocol family 16 > > >>> resource_request: Invalid resource name > > >>> Found NAND on CS0 > > >>> Registering NAND on CS0 > > >>> Switched to new clocking rate (Crystal/DPLL3/MPU): 26.0/332/166 MHz > > >>> OMAP DMA hardware revision 4.0 > > >>> USB: No board-specific platform config found > > >>> i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz > > >>> twl4030: PIH (irq 7) chaining IRQs 368..375 > > >>> twl4030: power (irq 373) chaining IRQs 376..383 > > >>> twl4030: gpio (irq 368) chaining IRQs 384..401 > > >>> i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz > > >>> twl4030_usb twl4030_usb: Initialized TWL4030 USB module > > >>> SCSI subsystem initialized > > >>> usbcore: registered new interface driver usbfs > > >>> usbcore: registered new interface driver hub > > >>> usbcore: registered new device driver usb > > >>> musb_hdrc: version 6.0, musb-dma, host, debug=0 > > >>> musb_hdrc: USB Host mode controller at d80ab000 using DMA, IRQ 92 > > >>> musb_hdrc musb_hdrc: MUSB HDRC host driver > > >>> musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 > > >>> usb usb1: configuration #1 chosen from 1 choice > > >>> hub 1-0:1.0: USB hub found > > >>> hub 1-0:1.0: 1 port detected > > >>> NET: Registered protocol family 2 > > >>> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > > >>> TCP established hash table entries: 4096 (order: 3, 32768 bytes) > > >>> TCP bind hash table entries: 4096 (order: 2, 16384 bytes) > > >>> TCP: Hash tables configured (established 4096 bind 4096) > > >>> TCP reno registered > > >>> NET: Registered protocol family 1 > > >>> NetWinder Floating Point Emulator V0.97 (double precision) > > >>> ashmem: initialized > > >>> VFS: Disk quotas dquot_6.5.1 > > >>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > >>> JFFS2 version 2.2. (NAND) (c) 2001-2006 Red Hat, Inc. > > >>> msgmni has been set to 245 > > >>> io scheduler noop registered > > >>> io scheduler anticipatory registered (default) > > >>> io scheduler deadline registered > > >>> io scheduler cfq registered > > >>> omapfb: configured for panel omap3beagle > > >>> omapfb: DISPC version 3.0 initialized > > >>> Console: switching to colour frame buffer device 160x45 > > >>> omapfb: Framebuffer initialized. Total vram 3686400 planes 1 > > >>> omapfb: Pixclock 72000 kHz hfreq 50.0 kHz vfreq 67.4 Hz > > >>> Serial: 8250/16550 driver4 ports, IRQ sharing enabled > > >>> serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 > > >>> serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 > > >>> serial8250.0: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 > > >>> console [ttyS2] enabled > > >>> brd: module loaded > > >>> loop: module loaded > > >>> logger: created 64K log 'log_main' > > >>> logger: created 256K log 'log_events' > > >>> logger: created 64K log 'log_radio' > > >>> usb 1-1: new high speed USB device using musb_hdrc and address 2 > > >>> usb 1-1: configuration #1 chosen from 1 choice > > >>> hub 1-1:1.0: USB hub found > > >>> hub 1-1:1.0: 4 ports detected > > >>> usb 1-1.1: new high speed USB device using musb_hdrc and address 3 > > >>> usb 1-1.1: configuration #1 chosen from 1 choice > > >>> usb 1-1.3: new low speed USB device using musb_hdrc and address 4 > > >>> usb 1-1.3: configuration #1 chosen from 1 choice > > >>> eth0: register 'asix' at usb-musb_hdrc-1.1, ASIX AX88772A USB 2.0 > >>> Ethernet, 00:08:54:a6:6d:25 > > >>> usbcore: registered new interface driver asix > > >>> usbcore: registered new interface driver cdc_ether > > >>> usbcore: registered new interface driver dm9601 > > >>> usbcore: registered new interface driver net1080 > > >>> usbcore: registered new interface driver cdc_subset > > >>> usbcore: registered new interface driver zaurus > > >>> Linux video capture interface: v2.00 > > >>> usbcore: registered new interface driver uvcvideo > > >>> USB Video Class driver (v0.1.0) > > >>> i2c /dev entries driver > > >>> Driver 'sd' needs updating - please use bus_type methods > > >>> omap2-nand driver initializing > > >>> NAND device: Manufacturer ID: 0x2c, Chip ID: 0xb1 (Micron NAND 128MiB > >>> 1,8V 16-bit) > > >>> cmdlinepart partition parsing not available > > >>> Creating 5 MTD partitions on "omap2-nand": > > >>> 0x00000000-0x00080000 : "X-Loader" > > >>> 0x00080000-0x00260000 : "U-Boot" > > >>> 0x00260000-0x00280000 : "U-Boot Env" > > >>> 0x00280000-0x00680000 : "Kernel" > > >>> 0x00680000-0x08000000 : "File System" > > >>> usbmon: debugfs is not available > > >>> mice: PS/2 mouse device common for all mice > > >>> usbcore: registered new interface driver usbtouchscreen > > >>> twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0 > > >>> twl4030_rtc twl4030_rtc: Power up reset detected. > > >>> twl4030_rtc twl4030_rtc: Enabling TWL4030-RTC. > > >>> OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec > > >>> cpuidle: using > > ... > > 閱讀更多 >> --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---