How did u fix the TS ? 2009/4/28 cindy_king_1024 <cindy_king_1...@126.com>
> Hi,Vishal > Thanks for your advice ,I will check it,and the TS can work now with > twl4030 (kernel 2.6.28 ). > > > 在2009-04-27 19:34:27,"vishal bhoj" <vishalb...@gmail.com> 写道: > > Cindy, > I have no idea abt the TS. Is the alsa driver wroking in ur case ? or Are u > using the stubbed audioflinger library ? > > > > 2009/4/27 cindy_king_1024 <cindy_king_1...@126.com> > >> Sorry,forget :I can play the Mp3 file but there is no sound in the audio >> out. >> Is there someone can give me some advise? >> >> 在2009-04-27 15:32:46,cindy_king_1024 <cindy_king_1...@126.com> 写道: >> >> Is anybody give me some advices about : >> 1.How to play Mp3: >> In the terminal it come with: >> init: cannot find '/system/bin/playmp3', disabling 'bootsound' >> 2.How to show the picture(jpg)and video(h.264/mpeg4)? >> >> 在2009-04-26 17:26:23,cindy_king_1024 <cindy_king_1...@126.com> 写道: >> >> Hi,Vishal >> It dosen't work as still,I have check it and added the TS patch as the >> links from Rupesh : >> CONFIG_PM=y >> # CONFIG_PM_DEBUG is not set >> CONFIG_PM_SLEEP=y >> >> 在2009-04-24 20:54:04,"vishal bhoj" <vishalb...@gmail.com> 写道: >> >> Cindy enable android PM in kernel config and build it.The >> android input subsystem accepts and interprets the x,y co-ordinates >> reported by the touch-driver (ads7846) properly if and only if the >> Power Management support is enabled in Android. Hence please enable >> CONFIG_PM while configuring the kernel for OMAP3 EVM.Then it myt work . >> >> 2009/4/24 Rupesh Gujare <rupesh.guj...@embinux.com> >> >>> Cindy, >>> >>> It works for me without any problem. I haven't done any calibration. >>> Worked for me out of box. >>> >>> >>> Regards, >>> >>> -- >>> Rupesh Gujarehttp://embinux.com >>> >>> >>> cindy_king_1024 wrote: >>> >>> Hi,Repesh >>> I have add the patch,but it can't work as still. >>> And what'about /sys/module/ads7846/parameters/calibration? Dose it need >>> to modify? >>> >>> >>> 在2009-04-23 23:11:02,"Rupesh Gujare" >>> <rupesh.guj...@embinux.com><rupesh.guj...@embinux.com>写道: >>> >>> Cindy, >>> Get this patch to TS working. :) >>> >>> >>> http://labs.embinux.org/git/cgit.cgi/repo/kernel.git/commit/?id=23a3416e6fef7109c52f9e7723843dc864c524a7 >>> >>> Regards, >>> >>> -- >>> Rupesh Gujarehttp://embinux.com >>> >>> >>> cindy_king_1024 wrote: >>> >>> Thanks.I have got the keymap. >>> >>> >>> 在2009-04-22 16:26:52,"vishal bhoj" >>> <vishalb...@gmail.com><vishalb...@gmail.com>写道: >>> >>> >>> Cindy , >>> >>> There are few problem with TS driver with Embinux source . I wud suggest >>> first get ur keypad working with Android. >>> >>> Touchscreen needs calibration patch which you can read it from other >>> mailing list . . . >>> >>> 2009/4/22 cindy_king_1024 <cindy_king_1...@126.com> >>> >>>> Hi,vishal >>>> Thanks ,the color is normal now. >>>> But the touch screen didn't work,I can't exit the menu .Any advise? >>>> >>>> >>>> 在2009-04-22 12:46:29,"vishal bhoj" <vishalb...@gmail.com> 写道: >>>> >>>> I am pasting the content of the link >>>> >>>> >>>> On Fri, Sep 26, 2008 at 4:20 PM, Daniel Schaeffer >>>> >>>> <[EMAIL PROTECTED]> wrote: >>>> > Has anyone looked into why the LCD display on the OMAP3EVM is always >>>> > tinted >>>> >>>> > red? I created a couple of color test images that I cat'ed to /dev/fb >>>> > and it >>>> > looks like the blue color channel is completely ignored. I was testing >>>> > on >>>> > v2.6.26-omap2 but is doesn't look like there have been any changes to >>>> > the fb >>>> >>>> >>>> > driver since then so I'm assuming the issue is also present in the head >>>> > of >>>> > the git tree. >>>> > >>>> > Regards, >>>> > >>>> > Daniel Schaeffer >>>> > >>>> >>>> Try the patch below(Remember that you may have to manually edit because >>>> >>>> >>>> this patch is against current HEAD) >>>> >>>> >>>> diff --git a/drivers/video/omap/lcd_omap3evm.c >>>> b/drivers/video/omap/lcd_omap3evm.c >>>> index a564ca5..821bafe 100644 >>>> --- a/drivers/video/omap/lcd_omap3evm.c >>>> +++ b/drivers/video/omap/lcd_omap3evm.c >>>> >>>> >>>> @@ -44,6 +44,8 @@ >>>> #define ENABLE_VDAC_DEV_GRP 0x20 >>>> #define ENABLE_VPLL2_DEDICATED 0x05 >>>> #define ENABLE_VPLL2_DEV_GRP 0xE0 >>>> +#define TWL4030_VPLL2_DEV_GRP 0x33 >>>> +#define TWL4030_VPLL2_DEDICATED 0x36 >>>> >>>> >>>> >>>> #define TWL_LED_LEDEN 0x00 >>>> #define TWL_PWMA_PWMAON 0x00 >>>> @@ -86,12 +88,24 @@ static void omap3evm_panel_cleanup(struct lcd_panel >>>> *panel) >>>> >>>> static int omap3evm_panel_enable(struct lcd_panel *panel) >>>> >>>> >>>> { >>>> + if (system_rev > OMAP3430_REV_ES1_0) { >>>> + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, >>>> + ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED); >>>> + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, >>>> >>>> >>>> + ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP); >>>> + } >>>> omap_set_gpio_dataout(LCD_PANEL_ENABLE_GPIO, 0); >>>> return 0; >>>> } >>>> >>>> static void omap3evm_panel_disable(struct lcd_panel *panel) >>>> >>>> >>>> { >>>> + if (system_rev > OMAP3430_REV_ES1_0) { >>>> + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, >>>> + TWL4030_VPLL2_DEDICATED); >>>> + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, >>>> >>>> >>>> + TWL4030_VPLL2_DEV_GRP); >>>> + } >>>> omap_set_gpio_dataout(LCD_PANEL_ENABLE_GPIO, 1); >>>> } >>>> >>>> >>>> >>>> >>>> >>>> 2009/4/21 cindy_king_1024 <cindy_king_1...@126.com> >>>> >>>>> >>>>> Thanks. >>>>> At the first time I boot up it the graphic was normal,but later the >>>>> graphic just look as it was make of green and red,lose the blue color. >>>>> >>>>> 在2009-04-21 17:29:35,"Nimit Manglick" <nimitandr...@gmail.com> 写道: >>>>> >>>>> Cindy, >>>>> >>>>> Change the settings as :- >>>>> >>>>> menu -->> settings --> sound & display -->> screen timeout >>>>> >>>>> select "never timeout" option from there. >>>>> >>>>> Regards >>>>> Nimit >>>>> >>>>> 2009/4/21 cindy_king_1024 <cindy_king_1...@126.com> >>>>> >>>>>> Hi,Nimit >>>>>> Now it can boot up but the system is very unstable. >>>>>> and some time the graphic come with red >>>>>> And the terminal putout: >>>>>> >>>>>> VFS: Mounted root (nfs filesystem). >>>>>> VFS: Mounted root (nfs filesystem). >>>>>> <6>Freeing init memory: 144K >>>>>> Freeing init memory: 144K >>>>>> <4>Warning: unable to open an initial console. >>>>>> Warning: unable to open an initial console. >>>>>> <3>init: cannot open '/initlogo.rle' >>>>>> init: cannot open '/initlogo.rle' >>>>>> <3>init: cannot find '/system/bin/playmp3', disabling 'bootsound' >>>>>> init: cannot find '/system/bin/playmp3', disabling 'bootsound' >>>>>> sh: can't access tty; job control turned off >>>>>> # <6>warning: `rild' uses 32-bit capabilities (legacy support in use) >>>>>> warning: `rild' uses 32-bit capabilities (legacy support in use) >>>>>> <6>request_suspend_state: wakeup (3->0) at 60751251220 (1970-01-01 >>>>>> 00:01:00.751251220 UTC) >>>>>> request_suspend_state: wakeup (3->0) at 60751251220 (1970-01-01 >>>>>> 00:01:00.751251220 UTC) >>>>>> <6>request_suspend_state: sleep (0->3) at 127989257812 (1970-01-01 >>>>>> 00:02:07.989257812 UTC) >>>>>> request_suspend_state: sleep (0->3) at 127989257812 (1970-01-01 >>>>>> 00:02:07.989257812 UTC) >>>>>> <6>PM: Syncing filesystems ... PM: Syncing filesystems ... done. >>>>>> done. >>>>>> Freezing user space processes ... Freezing user space processes ... >>>>>> (elapsed 0.00 seconds) (elapsed >>>>>> 0.00 seconds) done. >>>>>> done. >>>>>> Freezing remaining freezable tasks ... Freezing remaining freezable >>>>>> tasks ... (elapsed 0.00 seconds) >>>>>> (elapsed 0.00 seconds) done.done. >>>>>> Suspending console(s) (use no_console_suspend to debug) >>>>>> Suspending console(s) (use no_console_suspend to debug) >>>>>> <3>omapfb omapfb: timeout waiting for FRAME DONE >>>>>> +.瓛 -挧墵F!?涨6拜%F江(? >>>>>> ?hk?嫺瞚+4圞?鑝?應?皳?仱妑' >>>>>> ?垾畱痵omapfb omapfb: timeout waiting for FRAME DONE >>>>>> Powerdomain (core_pwrdm) didn't enter target state 1 >>>>>> Powerdomain (per_pwrdm) didn't enter target state 1 >>>>>> Could not enter target state in pm_suspend >>>>>> eth0: link down >>>>>> Restarting tasks ... Restarting tasks ... <6>wakeup wake lock: >>>>>> PowerManagerService >>>>>> <6>wakeup wake lock: PowerManagerService >>>>>> done. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> 在2009-04-21 15:36:15,"Nimit Manglick" <nimitandr...@gmail.com> 写道: >>>>>> >>>>>> >>>>>> Alsa-lib and alsa-sound patch is ONLY needed if you want to have audio >>>>>> support. >>>>>> and that comes later, firstly android has to boot up. >>>>>> >>>>>> Cindy, >>>>>> >>>>>> The kernel mentioned in the >>>>>> http://labs.embinux.org/git/cgit.cgi/linux-omap-2.6/commit/?h=evm-android-2.6.27 >>>>>> >>>>>> is for beagle-board and not for 3530 EVM. >>>>>> >>>>>> So still ur android is not booting ?? >>>>>> >>>>>> >>>>>> 2009/4/21 cindy_king_1024 <cindy_king_1...@126.com> >>>>>> >>>>>>> Thanks,but I have a question : >>>>>>> In your answer : >>>>>>> 1.when compile android ,dose it need to add alsa-lib and alsa_sound >>>>>>> with the patch Alsa_sound-v1.1.patch. >>>>>>> No You do not need this. >>>>>>> You mean I need not add the patch or I need not add alsa-lib and >>>>>>> alsa_sound? >>>>>>> All of alsa-lib and slsa_sound is not needed? >>>>>>> >>>>>>> >>>>>>> 在2009-04-21 14:41:31,"Rupesh Gujare" <rupesh.guj...@embinux.com> 写道: >>>>>>> >>>>>>> Cindy, >>>>>>> >>>>>>> cindy_king_1024 wrote: >>>>>>> >>>>>>> Hi,Nimit >>>>>>> My android source without cupcake baranch that you say above. >>>>>>> 1.when compile android ,dose it need to add alsa-lib and alsa_sound >>>>>>> with the patch Alsa_sound-v1.1.patch. >>>>>>> >>>>>>> No You do not need this. >>>>>>> >>>>>>> 2. In the filesystem ,is it need to patch >>>>>>> Initrc.patch<http://labs.embinux.org/images/6/6c/Initrc.patch> and >>>>>>> *Qwerty.patch* >>>>>>> >>>>>>> You need apply Initrc.patch,(most probably this patch will solve your >>>>>>> current error) Qwerty.patch is of no use to you. >>>>>>> >>>>>>> 3.Can you show me the config file of you kernel(wersion?),mine >>>>>>> reference to the links: >>>>>>> >>>>>>> >>>>>>> http://labs.embinux.org/git/cgit.cgi/linux-omap-2.6/commit/?h=evm-android-2.6.27 >>>>>>> >>>>>>> Above defconfig is working fine. You can go ahead with it. >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> -- >>>>>>> Rupesh Gujarehttp://embinux.com >>>>>>> >>>>>>> >>>>>>> >>>>>>> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/> >>>>>>> >>>>>>> >>>>>> >>>>>> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/> >>>>>> >>>>>> >>>>> >>>>> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/> >>>>> >>>>> >>>> >>>> >>>> -- >>>> with regards vishal >>>> >>>> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/> >>>> >>>> >>> >>> >>> -- >>> with regards vishal >>> >>> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/> >>> >>> >>> >>> >>> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/> >>> >>> >>> >>> >>> >>> >> >> >> -- >> with regards vishal >> >> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/> >> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/> >> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/> >> >> > > > -- > with regards vishal > > 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com>> > -- with regards vishal --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---