Hi I make it with the kernel in the links: http://www.mistralsolutions.com/assets/downloads/android.php
在2009-04-28 12:21:00,"vishal bhoj" <vishalb...@gmail.com> 写道: How did u fix the TS ? 2009/4/28 cindy_king_1024 <cindy_king_1...@126.com> Hi,Vishal Thanks for your advice ,I will check it,and the TS can work now with twl4030 (kernel 2.6.28 ). 在2009-04-27 19:34:27,"vishal bhoj" <vishalb...@gmail.com> 写道: Cindy, I have no idea abt the TS. Is the alsa driver wroking in ur case ? or Are u using the stubbed audioflinger library ? 2009/4/27 cindy_king_1024 <cindy_king_1...@126.com> Sorry,forget :I can play the Mp3 file but there is no sound in the audio out. Is there someone can give me some advise? 在2009-04-27 15:32:46,cindy_king_1024 <cindy_king_1...@126.com> 写道: Is anybody give me some advices about : 1.How to play Mp3: In the terminal it come with: init: cannot find '/system/bin/playmp3', disabling 'bootsound' 2.How to show the picture(jpg)and video(h.264/mpeg4)? 在2009-04-26 17:26:23,cindy_king_1024 <cindy_king_1...@126.com> 写道: Hi,Vishal It dosen't work as still,I have check it and added the TS patch as the links from Rupesh : CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y 在2009-04-24 20:54:04,"vishal bhoj" <vishalb...@gmail.com> 写道: Cindy enable android PM in kernel config and build it.The android input subsystem accepts and interprets the x,y co-ordinates reported by the touch-driver (ads7846) properly if and only if the Power Management support is enabled in Android. Hence please enable CONFIG_PM while configuring the kernel for OMAP3 EVM.Then it myt work . 2009/4/24 Rupesh Gujare <rupesh.guj...@embinux.com> Cindy, It works for me without any problem. I haven't done any calibration. Worked for me out of box. Regards, -- Rupesh Gujare http://embinux.com cindy_king_1024 wrote: Hi,Repesh I have add the patch,but it can't work as still. And what'about /sys/module/ads7846/parameters/calibration? Dose it need to modify? 在2009-04-23 23:11:02,"Rupesh Gujare" <rupesh.guj...@embinux.com> 写道: Cindy, Get this patch to TS working. :) http://labs.embinux.org/git/cgit.cgi/repo/kernel.git/commit/?id=23a3416e6fef7109c52f9e7723843dc864c524a7 Regards, -- Rupesh Gujare http://embinux.com cindy_king_1024 wrote: Thanks.I have got the keymap. 在2009-04-22 16:26:52,"vishal bhoj" <vishalb...@gmail.com> 写道: Cindy , There are few problem with TS driver with Embinux source . I wud suggest first get ur keypad working with Android. Touchscreen needs calibration patch which you can read it from other mailing list . . . 2009/4/22 cindy_king_1024 <cindy_king_1...@126.com> Hi,vishal Thanks ,the color is normal now. But the touch screen didn't work,I can't exit the menu .Any advise? 在2009-04-22 12:46:29,"vishal bhoj" <vishalb...@gmail.com> 写道: I am pasting the content of the link On Fri, Sep 26, 2008 at 4:20 PM, Daniel Schaeffer <[EMAIL PROTECTED]> wrote: > Has anyone looked into why the LCD display on the OMAP3EVM is always tinted > red? I created a couple of color test images that I cat'ed to /dev/fb and it > looks like the blue color channel is completely ignored. I was testing on > v2.6.26-omap2 but is doesn't look like there have been any changes to the fb > driver since then so I'm assuming the issue is also present in the head of > the git tree. > > Regards, > > Daniel Schaeffer > Try the patch below(Remember that you may have to manually edit because this patch is against current HEAD) diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c index a564ca5..821bafe 100644 --- a/drivers/video/omap/lcd_omap3evm.c +++ b/drivers/video/omap/lcd_omap3evm.c @@ -44,6 +44,8 @@ #define ENABLE_VDAC_DEV_GRP 0x20 #define ENABLE_VPLL2_DEDICATED 0x05 #define ENABLE_VPLL2_DEV_GRP 0xE0 +#define TWL4030_VPLL2_DEV_GRP 0x33 +#define TWL4030_VPLL2_DEDICATED 0x36 #define TWL_LED_LEDEN 0x00 #define TWL_PWMA_PWMAON 0x00 @@ -86,12 +88,24 @@ static void omap3evm_panel_cleanup(struct lcd_panel *panel) static int omap3evm_panel_enable(struct lcd_panel *panel) { + if (system_rev > OMAP3430_REV_ES1_0) { + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED); + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP); + } omap_set_gpio_dataout(LCD_PANEL_ENABLE_GPIO, 0); return 0; } static void omap3evm_panel_disable(struct lcd_panel *panel) { + if (system_rev > OMAP3430_REV_ES1_0) { + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, + TWL4030_VPLL2_DEDICATED); + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, + TWL4030_VPLL2_DEV_GRP); + } omap_set_gpio_dataout(LCD_PANEL_ENABLE_GPIO, 1); } 2009/4/21 cindy_king_1024 <cindy_king_1...@126.com> Thanks. At the first time I boot up it the graphic was normal,but later the graphic just look as it was make of green and red,lose the blue color. 在2009-04-21 17:29:35,"Nimit Manglick" <nimitandr...@gmail.com> 写道: Cindy, Change the settings as :- menu -->> settings --> sound & display -->> screen timeout select "never timeout" option from there. Regards Nimit 2009/4/21 cindy_king_1024 <cindy_king_1...@126.com> Hi,Nimit Now it can boot up but the system is very unstable. and some time the graphic come with red And the terminal putout: VFS: Mounted root (nfs filesystem). VFS: Mounted root (nfs filesystem). <6>Freeing init memory: 144K Freeing init memory: 144K <4>Warning: unable to open an initial console. Warning: unable to open an initial console. <3>init: cannot open '/initlogo.rle' init: cannot open '/initlogo.rle' <3>init: cannot find '/system/bin/playmp3', disabling 'bootsound' init: cannot find '/system/bin/playmp3', disabling 'bootsound' sh: can't access tty; job control turned off # <6>warning: `rild' uses 32-bit capabilities (legacy support in use) warning: `rild' uses 32-bit capabilities (legacy support in use) <6>request_suspend_state: wakeup (3->0) at 60751251220 (1970-01-01 00:01:00.751251220 UTC) request_suspend_state: wakeup (3->0) at 60751251220 (1970-01-01 00:01:00.751251220 UTC) <6>request_suspend_state: sleep (0->3) at 127989257812 (1970-01-01 00:02:07.989257812 UTC) request_suspend_state: sleep (0->3) at 127989257812 (1970-01-01 00:02:07.989257812 UTC) <6>PM: Syncing filesystems ... PM: Syncing filesystems ... done. done. Freezing user space processes ... Freezing user space processes ... (elapsed 0.00 seconds) (elapsed 0.00 seconds) done. done. Freezing remaining freezable tasks ... Freezing remaining freezable tasks ... (elapsed 0.00 seconds) (elapsed 0.00 seconds) done.done. Suspending console(s) (use no_console_suspend to debug) Suspending console(s) (use no_console_suspend to debug) <3>omapfb omapfb: timeout waiting for FRAME DONE +.瓛 -挧墵F!?涨6拜%F江(? ?hk?嫺瞚+4圞?鑝?應?皳?仱妑' ?垾畱痵omapfb omapfb: timeout waiting for FRAME DONE Powerdomain (core_pwrdm) didn't enter target state 1 Powerdomain (per_pwrdm) didn't enter target state 1 Could not enter target state in pm_suspend eth0: link down Restarting tasks ... Restarting tasks ... <6>wakeup wake lock: PowerManagerService <6>wakeup wake lock: PowerManagerService done. 在2009-04-21 15:36:15,"Nimit Manglick" <nimitandr...@gmail.com> 写道: Alsa-lib and alsa-sound patch is ONLY needed if you want to have audio support. and that comes later, firstly android has to boot up. Cindy, The kernel mentioned in the http://labs.embinux.org/git/cgit.cgi/linux-omap-2.6/commit/?h=evm-android-2.6.27 is for beagle-board and not for 3530 EVM. So still ur android is not booting ?? 2009/4/21 cindy_king_1024 <cindy_king_1...@126.com> Thanks,but I have a question : In your answer : 1.when compile android ,dose it need to add alsa-lib and alsa_sound with the patch Alsa_sound-v1.1.patch. No You do not need this. You mean I need not add the patch or I need not add alsa-lib and alsa_sound? All of alsa-lib and slsa_sound is not needed? 在2009-04-21 14:41:31,"Rupesh Gujare" <rupesh.guj...@embinux.com> 写道: Cindy, cindy_king_1024 wrote: Hi,Nimit My android source without cupcake baranch that you say above. 1.when compile android ,dose it need to add alsa-lib and alsa_sound with the patch Alsa_sound-v1.1.patch. No You do not need this. 2. In the filesystem ,is it need to patch Initrc.patch and Qwerty.patch You need apply Initrc.patch,(most probably this patch will solve your current error) Qwerty.patch is of no use to you. 3.Can you show me the config file of you kernel(wersion?),mine reference to the links: http://labs.embinux.org/git/cgit.cgi/linux-omap-2.6/commit/?h=evm-android-2.6.27 Above defconfig is working fine. You can go ahead with it. Regards, -- Rupesh Gujare http://embinux.com 网易邮箱,中国第一大电子邮件服务商 网易邮箱,中国第一大电子邮件服务商 网易邮箱,中国第一大电子邮件服务商 -- with regards vishal 网易邮箱,中国第一大电子邮件服务商 -- with regards vishal 网易邮箱,中国第一大电子邮件服务商 网易邮箱,中国第一大电子邮件服务商 -- with regards vishal 网易邮箱,中国第一大电子邮件服务商 网易邮箱,中国第一大电子邮件服务商 网易邮箱,中国第一大电子邮件服务商 -- with regards vishal 网易邮箱,中国第一大电子邮件服务商 -- with regards vishal --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---