on my modem AT+CGREG=? is displaying (0-2) but when i tried to set the value to 1 then its giving error. as i installed the SDK only , then after changing the file reference-ril.c, need to compile right? then create theSDK once again?
On Thu, Jun 4, 2009 at 3:11 PM, Rakesh Kumar <rakesh.y...@gmail.com> wrote: > > You are facing problem with AT command "AT+CGREG". Please remove this AT > command from the source code in the file reference-ril.c or use a modem > which supports AT+CGREG command. > > > Thanks > Rakesh > > > On Thu, Jun 4, 2009 at 3:00 PM, Sayiram K N <sayiram.koth...@gmail.com>wrote: > >> Hi here is the log that i got using the logcat >> >> I/RIL ( 21): Opening socket /dev/socket/qemud_gsm >> >> D/AT ( 21): AT> ATE0Q0V1 >> >> D/AT ( 21): AT< ATE0Q0V1 >> >> D/AT ( 21): AT< OK >> >> D/AT ( 21): AT> ATE0Q0V1 >> >> D/AT ( 21): AT< OK >> >> D/AT ( 21): AT> ATS0=0 >> >> D/AT ( 21): AT< OK >> >> D/AT ( 21): AT> AT+CMEE=1 >> >> D/AT ( 21): AT< OK >> >> D/AT ( 21): AT> AT+CREG=2 >> >> D/AT ( 21): AT< OK >> >> D/AT ( 21): AT> AT+CGREG=1 >> >> D/AT ( 21): AT< TAPI ERROR: 6 >> >> I/RILJ ( 86): Connected to 'rild' socket >> >> W/GSM ( 86): Can't open /system/etc/voicemail-conf.xml >> >> D/RILJ ( 86): [0000]> GET_CURRENT_CALLS >> >> D/GSM ( 86): Poll ServiceState done: oldSS=[1 home null null null ] >> newSS=[1 home null null null ] oldGprs=1 newGprs=1 oldType=unknown >> newType=unknown >> >> D/GSM ( 86): [DataConnectionTracker] Radio is off and clean up all >> connection >> >> D/GSM ( 86): [DataConnectionTracker] Clean up connection due to >> radioTurnedOff >> >> D/GSM ( 86): [DataConnection] Stop poll NetStat >> >> D/GSM ( 86): [DataConnectionTracker] ***trySetupData due to roamingOff >> >> D/GSM ( 86): [DataConnectionTracker] trySetupData: Not ready for data: >> dataState=IDLE gprsState=1 sim=false UMTS=false phoneState=IDLE >> dataEnabled=true roaming=false dataOnRoamingEnable=false >> >> D/GSM ( 86): [GsmSimCard] Broadcasting intent SIM_STATE_CHANGED_ACTION >> NOT_READY reason null >> >> D/RILJ ( 86): [0001]> SCREEN_STATE: true >> >> D/RILJ ( 86): [0002]> PDP_CONTEXT_LIST >> >> D/RILJ ( 86): WAKE_LOCK_TIMEOUT mReqPending=0 mRequestList=3 >> >> D/RILJ ( 86): 0: [0] GET_CURRENT_CALLS >> >> D/RILJ ( 86): 1: [1] SCREEN_STATE >> >> D/RILJ ( 86): 2: [2] PDP_CONTEXT_LIST >> >> >> >> i have one question while launching emulator i am specifiying /dev/ttyACM0 >> but when in android shell i tried all possibilities but not luck. >> >> >> >> On Thu, Jun 4, 2009 at 2:47 PM, Daniel Baeyens <dbaey...@warp.es> wrote: >> >>> >>> Hi, >>> >>> If the modem is correctly attached to the emulator, since the very >>> beginning (Android initialization) you can see modem AT commands >>> activity on the logs. As Rakesh suggests you, launch "logcat -b radio" >>> command, and you will see what's Android trying to do with the serial >>> port. >>> >>> There could be several reasons why your test is not working. One of >>> them is that >>> >>> echo "ATD1234;" > /dev/ttySX >>> >>> is not really safe and working in all cases. >>> >>> If your modem serial device is /dev/ttyACM0 (please, make sure it is), >>> then you will see much activity on the logs. Also, opening the dialer >>> window on the emulator will make you able to dial any real number. >>> >>> Send a "adb logcat -b radio > /tmp/log.txt" to the list (remember to >>> hide your PIN ;) ) and probably you will get more useful help :) >>> >>> Kind regards, >>> >>> On Thu, Jun 4, 2009 at 11:07 AM, Sayiram K N <sayiram.koth...@gmail.com> >>> wrote: >>> > the setup is like this >>> > first i switched my Motorola Phone to USB Modem mode and tried on >>> Widnwos >>> > environment using AT commands could able to call. and tried on Linux >>> > environment too and its working fine. But from the Android not able to >>> make >>> > any calls. >>> > The linux PC is recognising my Phone modem as ttyACM0. >>> > i am using emulator -radio /dev/ttyACM0 once the emulator launched from >>> the >>> > consle launched adb shell and given the commands echo "ATD1234;" > >>> > /dev/ttyS0 can you let me know whether this is correct or not. >>> > can you let me know your ways of calling too. >>> > >>> > On Thu, Jun 4, 2009 at 2:25 PM, Rakesh Kumar <rakesh.y...@gmail.com> >>> wrote: >>> >> >>> >> phone pn means what? I am using a external modem >>> >> >>> >> On Thu, Jun 4, 2009 at 2:12 PM, Sayiram K N < >>> sayiram.koth...@gmail.com> >>> >> wrote: >>> >>> >>> >>> can you pl. let me know how to make calls using emulator's dialer?? i >>> >>> have connected my phone pn to /dev/ttyACM0 and tried all >>> possibilities. but >>> >>> no luck. >>> >>> can you let me know the steps to make calls?? >>> >>> >>> >>> >>> >>> On Thu, Jun 4, 2009 at 1:13 PM, Rakesh Kumar <rakesh.y...@gmail.com> >>> >>> wrote: >>> >>>> >>> >>>> You can make the call using the emulator dialer. And when you make >>> the >>> >>>> call to your external modem than you can see the logs of incoming >>> call using >>> >>>> adb shell. >>> >>>> >>> >>>> On Thu, Jun 4, 2009 at 12:37 PM, Sayiram K N < >>> sayiram.koth...@gmail.com> >>> >>>> wrote: >>> >>>>> >>> >>>>> After the connection are you using the following >>> >>>>> adb shell >>> >>>>> # echo "ATD123445" > ttyS0 >>> >>>>> ?? if not what are the commands you are using>> >>> >>>>> Sram >>> >>>>> >>> >>>>> On Thu, Jun 4, 2009 at 10:07 AM, Rakesh Kumar < >>> rakesh.y...@gmail.com> >>> >>>>> wrote: >>> >>>>>> >>> >>>>>> I am able to connect emulator with an external modem. My modem is >>> >>>>>> connected to PC at port /dev/ttyS0. >>> >>>>>> And with the command "emulator -radio /dev/ttyS0", its working. >>> >>>>>> >>> >>>>>> >>> >>>>>> Thanks >>> >>>>>> Rakesh >>> >>>>>> >>> >>>>>> On Wed, Jun 3, 2009 at 5:39 PM, David Turner <di...@android.com> >>> >>>>>> wrote: >>> >>>>>>> >>> >>>>>>> On Wed, Jun 3, 2009 at 11:24 AM, sram <sayiram.koth...@gmail.com >>> > >>> >>>>>>> wrote: >>> >>>>>>>> >>> >>>>>>>> Hi >>> >>>>>>>> i am trying to connect USB external modem(my Motorola Phone) on >>> to >>> >>>>>>>> Android emulator. i have tried the following command >>> >>>>>>>> emulator -radio ttyACM0 -verbose -debug all >>> >>>>>>>> and from the ADB shell tried echo "ATD1234" > ttyS1 but there is >>> >>>>>>>> nothing happened. >>> >>>>>>> >>> >>>>>>> ttyS1 is not connected to the emulated modem at all. Actually, >>> none >>> >>>>>>> of the emulated serial ports are, >>> >>>>>>> so it's not surprising that this doesn't work. >>> >>>>>>> >>> >>>>>>>> >>> >>>>>>>> as well itried using the local host 5554 and then gsm call >>> 12344555 >>> >>>>>>>> but got the rror message " KO: Modem Emulation not started" can >>> any >>> >>>>>>>> one help me in this. >>> >>>>>>> >>> >>>>>>> Probably because the GSM stack tried to talk with your ttyACM0 >>> device >>> >>>>>>> and got answers it could not >>> >>>>>>> parse properly, for some reason. Try "adb logcat -b radio" to >>> display >>> >>>>>>> the radio log, which includes the >>> >>>>>>> AT commands exchanged between the modem and the stack. >>> >>>>>>> >>> >>>>>>> >>> >>>>>>>> >>> >>>>>>>> Sram >>> >>>>>>>> >>> >>>>>>> >>> >>>>>>> >>> >>>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>> >>> >>>> >>> >>>> >>> >>>> >>> >>>> >>> >> >>> >> >>> >> >>> >> >> >>> > >>> >>> >>> >>> -- >>> Daniel Baeyens >>> Warp Networks S.L. - http://www.warp.es >>> >>> > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---