HI ChenYang:
Thanks! Is there any other configration to set to make sure the
adb is ok? Yesterday, I successfuly connected the adb with
virtualbox,But today, when I new a project with the same configraion
and installed.vdi,and never successful again. I choosed the pcnet-pci
network adapter. do i need to recompile the kernel to enable the e1000
driver? Thanks!
On 6月15日, 下午6时36分, Chen Yang <sunsety...@gmail.com> wrote:
> You may need to set the state to tell the system:
> try:
> #setprop EXTERNAL_STORAGE_STATE mounted
> Then see whether it works or not.
> --
> Chen
> 2009/6/15 GrainWang <wlc...@yahoo.com.cn>
>
>
>
>
>
> > HI ChenYang:
> > According to your method,the adb was succesfully connected to the
> > virtualbox. But after push several test clips in the /sdcard path, the
> > "gallery" still prompt "No media found", does you know the reason? And
> > how can I do to make the clips availble in the virtual box?Thanks!
>
> > On 6月15日, 下午3时32分, Chen Yang <sunsety...@gmail.com> wrote:
> > > Oh, the ethernet card driver should match the network configuration in
> > the
> > > virtualbox, typically
> > > it provides the support of intel e1000 and PCnet-pci. I have used
> > e1000/NAT.
> > > Then in order to let the adb can find it, you may need to specify the
> > port
> > > forwarding via:
> > > VBoxManage setextradata "$YOUR_GUEST "
> > > "VBoxInternal/Devices/pcnet/0/LUN#0/Config/guestssh/Protocol" TCP
> > > VBoxManage setextradata "$YOUR_GUEST"
> > > "VBoxInternal/Devices/pcnet/0/LUN#0/Config/guestssh/GuestPort"
> > 5555
> > > VBoxManage setextradata "$YOUR_GUEST"
> > > "VBoxInternal/Devices/pcnet/0/LUN#0/Config/guestssh/HostPort"
> > 5555
> > > then it may work.
>
> > > I haven't played the virtual ethernet pair. But you can try to see
> > whether
> > > you can list its ip address by netcfg in the virtualbox environment by
> > > alt+f1. And see whether you can ping that address in your host, if you
> > can
> > > ping that address, try to set the address to environment variable ADBHOST
> > > and use "adb kill-server" and then "adb devices" to list the device.
>
> > > --
> > > Chen
>
> > > 2009/6/15 GrainWang <wlc...@yahoo.com.cn>
>
> > > > HI ChenYang:
> > > > The issue now is when using adb push, there is error message"No
> > > > device found", when I do make menuconfig, I choose "Device drivers"-
> > > > >"Network device support"->"virtual ethernet pair", and replaced the
> > > > built image. Is this all needed for the kernel?When virtualbox booted,
> > > > I choose "google search" to search in the website, the network
> > > > connection is ok. Does adb need some aditional configations? Is there
> > > > any guide exist for this? Also, when selecting "gallery", there is
> > > > always "No media found", even when I insert a mini sd card and a usb
> > > > disk which both contain the test clips.How to let the test clips
> > > > avaiable in virtual box? Thanks in advance!
> > > > On 6月15日, 上午11时44分, Chen Yang <sunsety...@gmail.com> wrote:
> > > > > hi, Grain:
> > > > > It's available in the built directory:
> > > > > mydroid/out/host/linux-x86/bin
> > > > > export it to the PATH, then you can use it easily.
> > > > > --
> > > > > Chen
> > > > > 2009/6/15 GrainWang <wlc...@yahoo.com.cn>
>
> > > > > > HI ChenYang:
> > > > > > I tried "adb push" first before I posted the topic, just show that
> > > > > > "adb: command not found"? do I still need something tools and
> > where's
> > > > > > the link? Thanks!
>
> > > > > > On 6月15日, 上午10时27分, Chen Yang <sunsety...@gmail.com> wrote:
> > > > > > > How about trying "adb push"? It needs the network being
> > configured
> > > > > > properly,
> > > > > > > you may need to compile the kernel supports the virtual ethernet
> > card
> > > > > > that
> > > > > > > virtualbox emulates.
> > > > > > > --
> > > > > > > Chen
>
> > > > > > > 2009/6/15 GrainWang <wlc...@yahoo.com.cn>
>
> > > > > > > > HI Sammy:
> > > > > > > > Thanks! Is there any way to add files in virtuabox after the
> > > > > > > > system booting?
>
> > > > > > > > On 6月12日, 下午4时22分, Sammy <cs_ch...@stu.ust.hk> wrote:
> > > > > > > > > Press Alt + F1 to show console
> > > > > > > > > Press Alt + F7 to show GUI
>
> > > > > > > > > On Jun 12, 3:59 pm, GrainWang <wlc...@yahoo.com.cn> wrote:
>
> > > > > > > > > > Hi All:
> > > > > > > > > > When virtualbox succeeded to boot, it show up in
> > window
> > > > > > > > > > mode,and I have not found the shell to get into command
> > line
> > > > > > mode,does
> > > > > > > > > > anyone know the solution?I'll frequently tranfser between
> > the
> > > > two
> > > > > > > > > > modes just like in a real linux. Thanks!- 隐藏被引用文字 -
>
> > > > > > > > > - 显示引用的文字 -- 隐藏被引用文字 -
>
> > > > > > > - 显示引用的文字 -- 隐藏被引用文字 -
>
> > > > > - 显示引用的文字 -- 隐藏被引用文字 -
>
> > > - 显示引用的文字 -- 隐藏被引用文字 -
>
> - 显示引用的文字 -
--~--~---------~--~----~------------~-------~--~----~
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---
