I inherited a Zoom (1) Board recently and want to get it running android. I went straight to omapzoom.org. I'm doing the obvious things, like selecting ldp instead of zoom2 where I can, and I can build successfully. But so far, I still haven't been able to successfully boot from an SD card or tftp boot on my platform. The first problem I hit is "Bad Magic Number" when I try booting from SD. For tftpboot, at least x-loader and u-boot seem to be working, but I get
Error: unrecognized/unsupported machine ID (r1 = 0x00000472) when it tries to deal with my uImage. My initial thoughts are that the instructions are now geared towards Zoom2, and some parts don't apply to Zoom1, or perhaps have some small difference that's not noted. - Does anyone have a link to the previous instruction pages (or perhaps a mirror) from when it was Zoom1-specific? - Is there a page that lists the differences between zoom1 and zoom2 that would help with the steps that I'd need to change from the omapzoom instructions? - Should this have just worked with the instructions, but maybe I should've stuck with L25.6, .7, or .8 rather than using the latest source? Thanks for any help you can offer. Hector --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
