My log file of the system
On Fri, Sep 11, 2009 at 12:00 AM, Jim Huang <jserv...@gmail.com> wrote: > > 2009/9/11 Kaushik(ICMAN) <kaushikprajap...@gmail.com>: > > I am also getting the same error. Is there any solution for this?? > > -Kaushik > > > > hi, > > Maybe you can take a try with 0xdroid from 0xlab: > http://gitorious.org/0xdroid > http://gitorious.org/0xdroid/pages/Install-Prebuilt-Images > > Or, > http://downloads.0xlab.org/dailybuild/ > > We focus on Beagleboard and its compatible hardware boards. > > Sincerely, > Jim Huang (jserv) > http://0xlab.org/ > > > > -- With Regards, Kaushik Prajapati Grad. Student San Jose State Uni. 408-821-5891 Stephen Leacock<http://www.brainyquote.com/quotes/authors/s/stephen_leacock.html> - "I detest life-insurance agents: they always argue that I shall some day die, which is not so." --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
exas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24) Reading boot sector Loading u-boot.bin from mmc U-Boot 2009.01-dirty (Feb 19 2009 - 12:23:21) I2C: ready OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz OMAP3 Beagle board + LPDDR/NAND DRAM: 256 MB NAND: 256 MiB Using default environment MUSB: using high speed In: serial usbtty Out: serial usbtty Err: serial usbtty Board revision C Serial #25e0000300000000040323090d024010 Hit any key to stop autoboot: 2 Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24) Reading boot sector Loading u-boot.bin from mmc U-Boot 2009.01-dirty (Feb 19 2009 - 12:23:21) I2C: ready OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz OMAP3 Beagle board + LPDDR/NAND DRAM: 256 MB NAND: 256 MiB Using default environment MUSB: using high speed In: serial usbtty Out: serial usbtty Err: serial usbtty Board revision C Serial #25e0000300000000040323090d024010 Hit any key to stop autoboot: 0 reading boot.scr 679 bytes read Running bootscript from mmc ... ## Executing script at 80200000 reading x-load.bin.ift 20392 bytes read ***** Replacing x-load ***** Usage: nand - NAND sub-system HW ECC selected NAND erase: device 0 offset 0x0, size 0x80000 Erasing at 0x60000 -- 100% complete. OK NAND write: device 0 offset 0x0, size 0x20000 131072 bytes written: OK NAND write: device 0 offset 0x20000, size 0x20000 131072 bytes written: OK NAND write: device 0 offset 0x40000, size 0x20000 131072 bytes written: OK NAND write: device 0 offset 0x60000, size 0x20000 131072 bytes written: OK reading u-boot-f.bin 275928 bytes read NAND erase: device 0 offset 0x80000, size 0x160000 Erasing at 0x1c0000 -- 100% complete. OK NAND write: device 0 offset 0x80000, size 0x160000 1441792 bytes written: OK ***** Erasing environment settings ***** Usage: nand - NAND sub-system NAND erase: device 0 offset 0x160000, size 0x20000 Erasing at 0x160000 -- 100% complete. OK reading normal.scr 693 bytes read ***** Executing normal.scr ***** ## Executing script at 80200000 reading uImage.bin 1911492 bytes read ***** Kernel: /dev/mmcblk0p1/uImage.bin ***** reading ramdisk.gz ** Unable to read "ramdisk.gz" from mmc 0:1 ** ***** RootFS: /dev/mmcblk0p2 ***** ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux-2.6.29-omap1-07182-gc3b6e5 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1911428 Bytes = 1.8 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux............................................................. .............................................................. done, booting the kernel. Linux version 2.6.29-omap1-07182-gc3b6e50 (ow...@ubuntu) (gcc version 4.2.1 (Cod eSourcery Sourcery G++ Lite 2007q3-51)) #1 Tue Sep 8 15:55:16 CDT 2009 CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: OMAP3 Beagle Board Memory policy: ECC disabled, Data cache writeback OMAP3430 ES3.0 SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000 Reserving 12582912 bytes SDRAM for VRAM Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: console=ttyS2,115200n8 noinitrd rootfstype=ext3 root=/dev/ mmcblk0p2 rw rootdelay=1 nohz=off omapfb.video_mode=1280x720mr...@60 init=/init androidboot.console=ttyS2 Unknown boot option `omapfb.video_mode=1280x720mr...@60': ignoring Unknown boot option `androidboot.console=ttyS2': ignoring Clocking rate (Crystal/DPLL/ARM core): 26.0/332/500 MHz GPMC revision 5.0 IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller OMAP34xx GPIO hardware version 2.5 PID hash table entries: 1024 (order: 10, 4096 bytes) OMAP clockevent source: GPTIMER12 at 32768 Hz Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB 128MB = 256MB total Memory: 243072KB available (3496K code, 687K data, 140K init) Calibrating delay loop... 485.26 BogoMIPS (lpj=1896448) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 520 bytes regulator: core version 0.5 NET: Registered protocol family 16 Found NAND on CS0 Registering NAND on CS0 OMAP DMA hardware revision 4.0 bio: create slab <bio-0> at 0 OMAP DSS rev 2.0 OMAP DISPC rev 3.0 OMAP VENC rev 2 i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz twl4030: PIH (irq 7) chaining IRQs 368..375 twl4030: power (irq 373) chaining IRQs 376..383 twl4030: gpio (irq 368) chaining IRQs 384..401 regulator: VMMC1: 1850 <--> 3150 mV normal standby regulator: VDAC: 1800 mV normal standby regulator: VUSB1V5: 1500 <--> 0 mV normal standby regulator: VUSB1V8: 1800 <--> 0 mV normal standby regulator: VUSB3V1: 3100 <--> 0 mV normal standby regulator: VPLL2: 1800 mV normal standby regulator: VSIM: 1800 <--> 3000 mV normal standby i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz SCSI subsystem initialized twl4030_usb twl4030_usb: Initialized TWL4030 USB module usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 musb_core_init 1421: reconfigure software for static FIFOs musb_hdrc musb_hdrc: musb_init_controller failed with status -19 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (double precision) ashmem: initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 475 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 serial8250.0: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 console [ttyS2] enabled brd: module loaded loop: module loaded i2c /dev entries driver Driver 'sd' needs updating - please use bus_type methods omap2-nand driver initializing NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bi t) cmdlinepart partition parsing not available Creating 5 MTD partitions on "omap2-nand": 0x000000000000-0x000000080000 : "X-Loader" 0x000000080000-0x000000260000 : "U-Boot" 0x000000260000-0x000000280000 : "U-Boot Env" 0x000000280000-0x000000680000 : "Kernel" 0x000000680000-0x000010000000 : "File System" usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-omap ehci-omap.0: OMAP-EHCI Host Controller ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OMAP-EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29-omap1-07182-gc3b6e50 ehci_hcd usb usb1: SerialNumber: ehci-omap.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. android init twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0 twl4030_rtc twl4030_rtc: Power up reset detected. twl4030_rtc twl4030_rtc: Enabling TWL4030-RTC. mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver logger: created 64K log 'log_main' logger: created 256K log 'log_events' logger: created 64K log 'log_radio' TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. Power Management for TI OMAP3. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 Console: switching to colour frame buffer device 80x30 clock: clksel_round_rate_div: dpll4_m4_ck target_rate 36000000 clock: new_div = 12, new_rate = 36000000 omapdss: Could not find exact pixel clock. Requested 23500 kHz, got 24000 kHz twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684 800) Waiting 1sec before mounting root device... mmc0: new SD card at address aaaa mmcblk0: mmc0:aaaa SD02G 1.84 GiB mmcblk0: p1 p2 kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended EXT3 FS on mmcblk0p2, internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) on device 179:2. Freeing init memory: 140K Warning: unable to open an initial console. init: cannot open '/initlogo.rle' init: cannot find '/system/bin/playmp3', disabling 'bootsound' # warning: `rild' uses 32-bit capabilities (legacy support in use)
