these are the xecution logs when I start the playback. ideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold = 1 E/CameraInput( 1021): postWriteAsync E/CameraInput( 1021): postWriteAsync: ID = 23, base = 0x40dff000, offset = 0x0, size = 202752 pointer 0x40dff000 E/CameraInput( 1021): Run E/CameraInput( 1021): Ln 733 Run writeAsync mFrameRefCount 1 writeAsyncID 175 E/CameraInput( 1021): writeComplete E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold = 1 E/PVMediaRecorder( 1021): reset E/AuthorDriver( 1021): handleReset E/AuthorDriver( 1021): removeConfigRefs E/CameraInput( 1021): deleteMediaTransfer E/CameraInput( 1021): setPeer iPeer 0x2415c aPeer 0x0 E/CameraInput( 1021): Reset E/CameraInput( 1021): AddCmdToQueue D/OMX_AACDEC( 1021): AACDEC_LCML_Callback():2716 out ts-13230 E/CameraInput( 1021): Run E/CameraInput( 1021): DoReset D/CameraService( 1021): stopRecording (pid 1021) D/CameraService( 1021): stopRecording(), hardware stopped OK E/CameraInput( 1021): ReleaseQueuedFrames E/CameraInput( 1021): DoRequestCompleted E/CameraInput( 1021): ThreadLogoff E/CameraInput( 1021): disconnect E/AuthorDriver( 1021): Command (16) completed with status(1) E/AuthorDriver( 1021): handleRemoveVideoSource E/AuthorDriver( 1021): Command (18) completed with status(1) E/AuthorDriver( 1021): handleRemoveAudioSource E/PVMediaRecorder( 1021): close E/AuthorDriver( 1021): handleClose E/AuthorDriver( 1021): Command (17) completed with status(1) E/AuthorDriver( 1021): doCleanUp E/CameraInput( 1021): destructor E/CameraInput( 1021): ReleaseQueuedFrames E/CameraInput( 1021): camera was cold when we started, stopping preview D/CameraService( 1021): stopPreview (pid 1021) E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold = 1 E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold = 1 E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold = 1 E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold = 1 E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold = 1 E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold = 1 E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, num
On Tue, Dec 22, 2009 at 6:21 PM, vishal bhoj <vishalb...@gmail.com> wrote: > I am using donut + opencore 2.02 > > > On Tue, Dec 22, 2009 at 6:20 PM, vishal bhoj <vishalb...@gmail.com> wrote: > >> >> I see that when I have video playback and recording object , >> as soon as I start my video playback the recording gets stopped.Someone is >> calling a writecomplete on the camera input. >> I am unable to find any reference in the mediaserver implementation.Can >> anyone clarify my doubts, >> Is opencore internally calling this complete when I start videoplayback ? >> Here is the log . I have just change LOGV to LOGE so that I can see the >> logs >> >> /CameraInput( 1021): postWriteAsync >> E/CameraInput( 1021): postWriteAsync: ID = 24, base = 0x40e33000, offset = >> 0x0, size = 202752 pointer 0x40e33000 >> E/CameraInput( 1021): Run >> E/CameraInput( 1021): Ln 733 Run writeAsync mFrameRefCount 2 writeAsyncID >> 42 >> E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold >> = 1 >> E/CameraInput( 1021): writeComplete >> E/CameraInput( 1021): writeComplete >> E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold >> = 1 >> E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold >> = 1 >> E/VideoMIO( 1021): processWriteResponseQueue: queued = 2, numFramesToHold >> = 1 >> E/CameraInput( 1021): postWriteAsync >> E/CameraInput( 1021): postWriteAsync: ID = 24, base = 0x40e33000, offset = >> 0x0, size = 202752 pointer 0x40e33000 >> E/CameraInput( 1021): Run >> E/CameraInput( 1021): Ln 733 Run writeAsync mFrameRefCount 1 writeAsyncID >> 43 >> E/CameraInput( 1021): writeComplete >> E/CameraInput( 1021): Stop >> E/CameraInput( 1021): AddCmdToQueue >> E/CameraInput( 1021): Run >> E/CameraInput( 1021): DoStop >> D/CameraService( 1021): stopRecording (pid 1021) >> D/CameraService( 1021): stopRecording(), hardware stopped OK >> E/CameraInput( 1021): ReleaseQueuedFrames >> E/CameraInput( 1021): DoRequestCompleted >> E/AuthorDriver( 1021): HandleInformationalEvent(2049) >> >> >> ---------- Forwarded message ---------- >> From: vishal bhoj <vishalb...@gmail.com> >> Date: Tue, Dec 22, 2009 at 2:56 PM >> Subject: simultaneous video playback and camera record >> To: android-porting@googlegroups.com, android-platf...@googlegroups.com >> >> >> Hi, >> >> I created an application with videoview and mediarecorder from camera on >> omap3 platform. >> The hardware codecs work fine for seperate video playback and recording. >> Is there any restriction inside opencore causing a blocking when I try to >> run both simultaneously . >> Through command prompt the same codecs are able to encode and decode >> simultaneously. >> >> Is there any kind of scheduler setting inside opencore (OSCL) ? >> >> -- >> with regards vishal >> >> >> >> -- >> with regards vishal >> > > > > -- > with regards vishal > -- with regards vishal -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
