any idea??
On Fri, Jan 22, 2010 at 3:48 PM, Xingwen Huang <hxwsi...@gmail.com> wrote:
> i ues the option refuse-eap!
> So CHAP works, but it appears once more!!!
> LCP terminated by peer!!!!
>
> On Wed, Jan 20, 2010 at 3:02 PM, Xingwen Huang <hxwsi...@gmail.com> wrote:
>
>> I also got this problem --- LCP terminated by peer !!!
>> But i had no idea about that.
>>
>>
>> On Fri, Nov 13, 2009 at 1:45 PM, HermanMao <hermanmao...@gmail.com>wrote:
>>
>>> Hi,
>>>
>>> I change some parameters of PPPD and get another situation. It failed
>>> on IPCP step. Latest log is showed below. PPPD ran by manual.
>>> Does anyone have any idea or tell me what parameter should I set or
>>> remove? Thanks.
>>>
>>>
>>> pppd options in effect:pppd options in effect:
>>> debug # (from command line)
>>> nodetach # (from command line)
>>> dump # (from command line)
>>> noauth # (from command line)
>>> /dev/ttyUSB0 # (from command line)
>>> 115200 # (from command line)
>>> noaccomp # (from command line)
>>> mru 1280 # (from command line)
>>> mtu 1280 # (from command line)
>>> nopcomp # (from command line)
>>> noipdefault # (from command line)
>>> using channel 1
>>> Using interface ppp0
>>> Connect: ppp0 <--> /dev/ttyUSB0
>>> sent [LCP ConfReq id=0x1 <mru 1280> <asyncmap 0x0> <magic 0x4cc4471a>]
>>> rcvd [LCP ConfNak id=0x2 <magic 0x7d0>]
>>> rcvd [LCP ConfAck id=0x1 <mru 1280> <asyncmap 0x0> <magic 0x4cc4471a>]
>>> rcvd [LCP ConfReq id=0x2 <mru 1500> <asyncmap 0x0> <magic 0x7d0>
>>> <pcomp> <accomp>]
>>> sent [LCP ConfRej id=0x2 <pcomp> <accomp>]
>>> rcvd [LCP ConfReq id=0x3 <mru 1500> <asyncmap 0x0> <magic 0x7d0>]
>>> sent [LCP ConfAck id=0x3 <mru 1500> <asyncmap 0x0> <magic 0x7d0>]
>>> sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
>>> sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0>]
>>> rcvd [LCP TermReq id=0x4]
>>> LCP terminated by peer
>>> sent [LCP TermAck id=0x4]
>>> Connection terminated.
>>>
>>> Herman
>>>
>>> On 11月11日, 下午7時32分, HermanMao <hermanmao...@gmail.com> wrote:
>>> > Hi,
>>> >
>>> > I use multiplexer function on ril. When it dial "ATD*99***1#",PPP
>>> > daemon will start to work. I met a problem,PPPdaemon can't get local
>>> > IP successfully. It will fail and show "Serial line is looped back.".
>>> > I use the same external modem and use "WvDial" on my PC, it can work
>>> > well. Does anyone have any suggestion? Below is my pppd log and
>>> > parameters of pppd. Thanks advice.
>>> >
>>> > <init.gprs-pppd parameter>----------------------------------------
>>> > /system/xbin/pppd /dev/pts/1 115200 mru 1280 mtu 1280 nodetach debug
>>> > dump noauth noipdefault
>>> >
>>> > <PPPD log>--------------------------------------------------
>>> > D/AT ( 680): AT> ATD*99***1#
>>> > D/AT ( 680): AT< ATD*99***1#
>>> > D/AT ( 680): AT< CONNECT 115200
>>> > D/RILJ ( 757): [0041]< SETUP_DEFAULT_PDP {1, ppp0}
>>> > D/GSM ( 757): [PdpConnection] PDP setup on cid = 1
>>> > I/pppd ( 867): Starting pppd
>>> > D/pppd ( 868): using channel 1
>>> > I/pppd ( 868): Using interface ppp0
>>> > I/pppd ( 868): Connect: ppp0 <--> /dev/pts/1
>>> > D/pppd ( 868): sent [LCP ConfReq id=0x1 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x10ee7db8> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x1 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x10ee7db8> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0x1 <magic 0xcbadab2d>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x1 <magic 0xcbadab2d>]
>>> > D/pppd ( 868): sent [LCP ConfReq id=0x2 <mru 1280> <asyncmap 0x0>
>>> > <magic 0xdc2e6c51> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x2 <mru 1280> <asyncmap 0x0>
>>> > <magic 0xdc2e6c51> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0x2 <magic 0x85213cae>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x2 <magic 0x85213cae>]
>>> > D/pppd ( 868): sent [LCP ConfReq id=0x3 <mru 1280> <asyncmap 0x0>
>>> > <magic 0xa4f6963d> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x3 <mru 1280> <asyncmap 0x0>
>>> > <magic 0xa4f6963d> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0x3 <magic 0x6a788a51>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x3 <magic 0x6a788a51>]
>>> > D/pppd ( 868): sent [LCP ConfReq id=0x4 <mru 1280> <asyncmap 0x0>
>>> > <magic 0xe32a46cf> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x4 <mru 1280> <asyncmap 0x0>
>>> > <magic 0xe32a46cf> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0x4 <magic 0xf00fb1a9>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x4 <magic 0xf00fb1a9>]
>>> > D/pppd ( 868): sent [LCP ConfReq id=0x5 <mru 1280> <asyncmap 0x0>
>>> > <magic 0xaec947d1> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x5 <mru 1280> <asyncmap 0x0>
>>> > <magic 0xaec947d1> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0x5 <magic 0x5b856e94>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x5 <magic 0x5b856e94>]
>>> > D/pppd ( 868): sent [LCP ConfReq id=0x6 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x9dbb784c> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x6 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x9dbb784c> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0x6 <magic 0xcd6c0183>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x6 <magic 0xcd6c0183>]
>>> > D/pppd ( 868): sent [LCP ConfReq id=0x7 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x20414c33> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x7 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x20414c33> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0x7 <magic 0xa0f230a4>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x7 <magic 0xa0f230a4>]
>>> > D/pppd ( 868): sent [LCP ConfReq id=0x8 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x3d011750> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x8 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x3d011750> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0x8 <magic 0xaabc6c98>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x8 <magic 0xaabc6c98>]
>>> > D/pppd ( 868): sent [LCP ConfReq id=0x9 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x1c33c2e3> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x9 <mru 1280> <asyncmap 0x0>
>>> > <magic 0x1c33c2e3> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0x9 <magic 0x2e4035ae>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x9 <magic 0x2e4035ae>]
>>> > D/pppd ( 868): sent [LCP ConfReq id=0xa <mru 1280> <asyncmap 0x0>
>>> > <magic 0xabbfaccd> <pcomp> <accomp>]
>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0xa <mru 1280> <asyncmap 0x0>
>>> > <magic 0xabbfaccd> <pcomp> <accomp>]
>>> > D/pppd ( 868): sent [LCP ConfNak id=0xa <magic 0x670acb6>]
>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0xa <magic 0x670acb6>]
>>> > I/pppd ( 868): Serial line is looped back.
>>> > D/pppd ( 868): sent [LCP TermReq id=0xb "Loopback detected"]
>>> > D/pppd ( 868): rcvd [LCP TermReq id=0xb "Loopback detected"]
>>> > D/pppd ( 868): sent [LCP TermAck id=0xb]
>>> > D/pppd ( 868): rcvd [LCP TermAck id=0xb]
>>> > I/pppd ( 868): Connection terminated.
>>> > I/pppd ( 885): pppd exited with 17
>>>
>>> --
>>> unsubscribe:
>>> android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com>
>>> website: http://groups.google.com/group/android-porting
>>>
>>
>>
>
--
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
