Your mru and mtu are all set to 1280, and how long is your max frame length
of mux?
On Tue, Jan 26, 2010 at 11:22 AM, Xingwen Huang <hxwsi...@gmail.com> wrote:
> any idea??
>
>
> On Fri, Jan 22, 2010 at 3:48 PM, Xingwen Huang <hxwsi...@gmail.com> wrote:
>
>> i ues the option refuse-eap!
>> So CHAP works, but it appears once more!!!
>> LCP terminated by peer!!!!
>>
>> On Wed, Jan 20, 2010 at 3:02 PM, Xingwen Huang <hxwsi...@gmail.com>wrote:
>>
>>> I also got this problem --- LCP terminated by peer !!!
>>> But i had no idea about that.
>>>
>>>
>>> On Fri, Nov 13, 2009 at 1:45 PM, HermanMao <hermanmao...@gmail.com>wrote:
>>>
>>>> Hi,
>>>>
>>>> I change some parameters of PPPD and get another situation. It failed
>>>> on IPCP step. Latest log is showed below. PPPD ran by manual.
>>>> Does anyone have any idea or tell me what parameter should I set or
>>>> remove? Thanks.
>>>>
>>>>
>>>> pppd options in effect:pppd options in effect:
>>>> debug # (from command line)
>>>> nodetach # (from command line)
>>>> dump # (from command line)
>>>> noauth # (from command line)
>>>> /dev/ttyUSB0 # (from command line)
>>>> 115200 # (from command line)
>>>> noaccomp # (from command line)
>>>> mru 1280 # (from command line)
>>>> mtu 1280 # (from command line)
>>>> nopcomp # (from command line)
>>>> noipdefault # (from command line)
>>>> using channel 1
>>>> Using interface ppp0
>>>> Connect: ppp0 <--> /dev/ttyUSB0
>>>> sent [LCP ConfReq id=0x1 <mru 1280> <asyncmap 0x0> <magic 0x4cc4471a>]
>>>> rcvd [LCP ConfNak id=0x2 <magic 0x7d0>]
>>>> rcvd [LCP ConfAck id=0x1 <mru 1280> <asyncmap 0x0> <magic 0x4cc4471a>]
>>>> rcvd [LCP ConfReq id=0x2 <mru 1500> <asyncmap 0x0> <magic 0x7d0>
>>>> <pcomp> <accomp>]
>>>> sent [LCP ConfRej id=0x2 <pcomp> <accomp>]
>>>> rcvd [LCP ConfReq id=0x3 <mru 1500> <asyncmap 0x0> <magic 0x7d0>]
>>>> sent [LCP ConfAck id=0x3 <mru 1500> <asyncmap 0x0> <magic 0x7d0>]
>>>> sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
>>>> sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0>]
>>>> rcvd [LCP TermReq id=0x4]
>>>> LCP terminated by peer
>>>> sent [LCP TermAck id=0x4]
>>>> Connection terminated.
>>>>
>>>> Herman
>>>>
>>>> On 11月11日, 下午7時32分, HermanMao <hermanmao...@gmail.com> wrote:
>>>> > Hi,
>>>> >
>>>> > I use multiplexer function on ril. When it dial "ATD*99***1#",PPP
>>>> > daemon will start to work. I met a problem,PPPdaemon can't get local
>>>> > IP successfully. It will fail and show "Serial line is looped back.".
>>>> > I use the same external modem and use "WvDial" on my PC, it can work
>>>> > well. Does anyone have any suggestion? Below is my pppd log and
>>>> > parameters of pppd. Thanks advice.
>>>> >
>>>> > <init.gprs-pppd parameter>----------------------------------------
>>>> > /system/xbin/pppd /dev/pts/1 115200 mru 1280 mtu 1280 nodetach debug
>>>> > dump noauth noipdefault
>>>> >
>>>> > <PPPD log>--------------------------------------------------
>>>> > D/AT ( 680): AT> ATD*99***1#
>>>> > D/AT ( 680): AT< ATD*99***1#
>>>> > D/AT ( 680): AT< CONNECT 115200
>>>> > D/RILJ ( 757): [0041]< SETUP_DEFAULT_PDP {1, ppp0}
>>>> > D/GSM ( 757): [PdpConnection] PDP setup on cid = 1
>>>> > I/pppd ( 867): Starting pppd
>>>> > D/pppd ( 868): using channel 1
>>>> > I/pppd ( 868): Using interface ppp0
>>>> > I/pppd ( 868): Connect: ppp0 <--> /dev/pts/1
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0x1 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x10ee7db8> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x1 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x10ee7db8> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0x1 <magic 0xcbadab2d>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x1 <magic 0xcbadab2d>]
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0x2 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xdc2e6c51> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x2 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xdc2e6c51> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0x2 <magic 0x85213cae>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x2 <magic 0x85213cae>]
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0x3 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xa4f6963d> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x3 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xa4f6963d> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0x3 <magic 0x6a788a51>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x3 <magic 0x6a788a51>]
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0x4 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xe32a46cf> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x4 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xe32a46cf> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0x4 <magic 0xf00fb1a9>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x4 <magic 0xf00fb1a9>]
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0x5 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xaec947d1> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x5 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xaec947d1> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0x5 <magic 0x5b856e94>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x5 <magic 0x5b856e94>]
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0x6 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x9dbb784c> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x6 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x9dbb784c> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0x6 <magic 0xcd6c0183>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x6 <magic 0xcd6c0183>]
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0x7 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x20414c33> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x7 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x20414c33> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0x7 <magic 0xa0f230a4>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x7 <magic 0xa0f230a4>]
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0x8 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x3d011750> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x8 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x3d011750> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0x8 <magic 0xaabc6c98>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x8 <magic 0xaabc6c98>]
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0x9 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x1c33c2e3> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0x9 <mru 1280> <asyncmap 0x0>
>>>> > <magic 0x1c33c2e3> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0x9 <magic 0x2e4035ae>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0x9 <magic 0x2e4035ae>]
>>>> > D/pppd ( 868): sent [LCP ConfReq id=0xa <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xabbfaccd> <pcomp> <accomp>]
>>>> > D/pppd ( 868): rcvd [LCP ConfReq id=0xa <mru 1280> <asyncmap 0x0>
>>>> > <magic 0xabbfaccd> <pcomp> <accomp>]
>>>> > D/pppd ( 868): sent [LCP ConfNak id=0xa <magic 0x670acb6>]
>>>> > D/pppd ( 868): rcvd [LCP ConfNak id=0xa <magic 0x670acb6>]
>>>> > I/pppd ( 868): Serial line is looped back.
>>>> > D/pppd ( 868): sent [LCP TermReq id=0xb "Loopback detected"]
>>>> > D/pppd ( 868): rcvd [LCP TermReq id=0xb "Loopback detected"]
>>>> > D/pppd ( 868): sent [LCP TermAck id=0xb]
>>>> > D/pppd ( 868): rcvd [LCP TermAck id=0xb]
>>>> > I/pppd ( 868): Connection terminated.
>>>> > I/pppd ( 885): pppd exited with 17
>>>>
>>>> --
>>>> unsubscribe:
>>>> android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com>
>>>> website: http://groups.google.com/group/android-porting
>>>>
>>>
>>>
>>
> --
> unsubscribe:
> android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com>
> website: http://groups.google.com/group/android-porting
>
--
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
