can see what happens when you 'boot', instead of a saveenv&reset? btw - u missed 'saveenv', so even if u reset, uboot got nothing to boot.
and 2 hours is way long., reset happens in couple of seconds.. if not there's some problem. a power cycle should have completed after 'reset' command., On Fri, Apr 9, 2010 at 10:14 AM, ajish zacharias <ajishzachar...@gmail.com> wrote: > Sir , > I tried procedure mentioned in > http://code.google.com/p/rowboat/wiki/ConfigureAndBuild. > Then i got terminal window shown in below.In that procedure i didn't > use saveenv command In my previous attempt i use it,the result was > same.I got message resetting ,i wait for almost 2 hour but there is > nochange in terminal. > > OMAP3530-GP ES3.0, CPU-OPP2 L3-165MHz > > OMAP3 Beagle board + LPDDR/NAND > > DRAM: 128 MB > > NAND: 256 MiB > > In: serial > > Out: serial > > Err: serial > > Board revision Ax/Bx > > Die ID #5ac400030000000004013f8901001001 > > Hit any key to stop autoboot: 0 > > OMAP3 beagleboard.org # > > > > OMAP3 beagleboard.org # mmc init > > > > mmc1 is available > > OMAP3 beagleboard.org # > > > > mmc1 is available > > OMAP3 beagleboard.org # setenv bootcmd 'mmc init;fatload mmc 1 > 80200000 uImage; bootm 80200000' > > > > OMAP3 beagleboard.org # > > > > Unknown command '' - try 'help' > > OMAP3 beagleboard.org # setenv bootargs 'mem=128M > androidboot.console=ttyS2 console=tty0 console=ttyS2,115200n8 root=/ > dev/mmcblk0p1 rw init=/init rootwait > omapfb.viedo_mode=640x480mr...@60' > > > > OMAP3 beagleboard.org # reset > > > > resetting ... > > thanking advance > > with regards Ajish Zacharias(CAIR,DRDO) > > -- > unsubscribe: android-porting+unsubscr...@googlegroups.com > website: http://groups.google.com/group/android-porting > > To unsubscribe, reply using "remove me" as the subject. > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting