sir thanks for advice, i try boot command ,then terminal it is mention booting linux kernel ,but hdmi sreen doesn't get any o/p , in terminal also same message(booting from linux kernel ) ,sir can you tell what is the problem ,thanking in advance with regard ajish zacharias On Apr 9, 1:43 pm, Deva R <r.deva...@gmail.com> wrote: > can see what happens when you 'boot', instead of a saveenv&reset? > btw - u missed 'saveenv', so even if u reset, uboot got nothing to boot. > > and 2 hours is way long., reset happens in couple of seconds.. if not > there's some problem. > a power cycle should have completed after 'reset' command., > > On Fri, Apr 9, 2010 at 10:14 AM, ajish zacharias > > <ajishzachar...@gmail.com> wrote: > > Sir , > > I tried procedure mentioned in > > http://code.google.com/p/rowboat/wiki/ConfigureAndBuild. > > Then i got terminal window shown in below.In that procedure i didn't > > use saveenv command In my previous attempt i use it,the result was > > same.I got message resetting ,i wait for almost 2 hour but there is > > nochange in terminal. > > > OMAP3530-GP ES3.0, CPU-OPP2 L3-165MHz > > > OMAP3Beagleboard+ LPDDR/NAND > > > DRAM: 128 MB > > > NAND: 256 MiB > > > In: serial > > > Out: serial > > > Err: serial > > >Boardrevision Ax/Bx > > > Die ID #5ac400030000000004013f8901001001 > > > Hit any key to stop autoboot: 0 > > > OMAP3 beagleboard.org # > > > OMAP3 beagleboard.org # mmc init > > > mmc1 is available > > > OMAP3 beagleboard.org # > > > mmc1 is available > > > OMAP3 beagleboard.org # setenv bootcmd 'mmc init;fatload mmc 1 > > 80200000 uImage; bootm 80200000' > > > OMAP3 beagleboard.org # > > > Unknown command '' - try 'help' > > > OMAP3 beagleboard.org # setenv bootargs 'mem=128M > > androidboot.console=ttyS2 console=tty0 console=ttyS2,115200n8 root=/ > > dev/mmcblk0p1 rw init=/init rootwait > > omapfb.viedo_mode=640x480mr...@60' > > > OMAP3 beagleboard.org # reset > > > resetting ... > > > thanking advance > > > with regards Ajish Zacharias(CAIR,DRDO) > > > -- > > unsubscribe:android-porting+unsubscr...@googlegroups.com > > website:http://groups.google.com/group/android-porting > > > To unsubscribe, reply using "remove me" as the subject.
-- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
