Hi, I think u can check the parameters of the CREG or COPS. It maybe caused by the wrong parameters from BP. Maybe u need to modify ril implementation for these two AT commands. Br.
-----邮件原件----- 发件人: android-porting@googlegroups.com [mailto:android-port...@googlegroups.com] 代表 Weber 发送时间: 2010年6月9日 17:06 收件人: android-porting 主题: [android-porting] signal of gprs is zero Hi,everyone I have ported eclair2.1 to my board. at first ,I can dial a call and send sms(the signal are good--full or nearly full) but the gprs could not be used,mms can not be sent then I found that the apns are empty ,so I modify the apns-conf.xml in system/etc now I can see the G flag in the top bar,and the signal none(without little cross)---if it is not connected there will be a little cross on the signal flag here are the logs: 535 D/RILJ ( 781): [0027]< GPRS_REGISTRATION_STATE {2, ffffffff, ffffffff} 536 D/AT ( 676): 537 D/AT ( 676): 538 D/AT ( 676): +CREG: 2,2 539 D/AT ( 676): 540 D/AT ( 676): 541 D/AT ( 676): 542 D/AT ( 676): OK 543 D/AT ( 676): 544 D/AT ( 676): AT< +CREG: 2,2 545 D/AT ( 676): AT< OK 546 D/RIL ( 676): onRequest: QUERY_NETWORK_SELECTION_MODE 547 D/AT ( 676): AT> AT+COPS? 548 D/AT ( 676): AT+COPS? 549 D/RILJ ( 781): [0028]< REGISTRATION_STATE {2, ffffffff, ffffffff} 550 W/GSM ( 781): error parsing RegistrationState: java.lang.NumberFormatException: unable to parse 'ffffffff' as integer it seems that the GPRS state (fffffff) is wrong. could you tell me what are the problems ? Thanks -Weber -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting