Hi Irfan, Thank for your information, I double check the log.
In logcat, I found AP can be located, and ifcfg_ralink service has been completed State change to COMPLETED dhcpcd debug message can be found, but last message is D/dhcpcd ( 1309): executing `/system/etc/dhcpcd/dhcpcd-run-hooks', reason PREINIT Is there any other possible reason? D/wpa_supplicant( 1294): Initializing interface 'wlan0' conf '/system/ etc/wifi/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A' D/wpa_supplicant( 1294): Configuration file '/system/etc/wifi/ wpa_supplicant.conf' -> '/system/etc/wifi/wpa_supplicant.conf' D/wpa_supplicant( 1294): Reading configuration file '/system/etc/wifi/ wpa_supplicant.conf' D/wpa_supplicant( 1294): ctrl_interface='DIR=/data/system/ wpa_supplicant GROUP=wifi' D/wpa_supplicant( 1294): update_config=1 D/wpa_supplicant( 1294): ap_scan=1 D/wpa_supplicant( 1294): Priority group 0 D/wpa_supplicant( 1294): id=0 ssid='' D/wpa_supplicant( 1294): Initializing interface (2) 'wlan0' init: untracked pid 1296 exited phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0. D/wpa_supplicant( 1294): Interface wlan0 set UP - waiting a second for the driver to complete initialization D/wpa_supplicant( 1294): SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf D/wpa_supplicant( 1294): capabilities: key_mgmt 0xf enc 0xf flags 0x0 D/wpa_supplicant( 1294): WEXT: Operstate: linkmode=1, operstate=5 D/wpa_supplicant( 1294): Own MAC address: 94:0c:6d:e0:14:dc ... D/wpa_supplicant( 1294): State: ASSOCIATED -> COMPLETED I/wpa_supplicant( 1294): CTRL-EVENT-STATE-CHANGE id=0 state=7 BSSID=00:00:00:00:00:00 I/wpa_supplicant( 1294): CTRL-EVENT-CONNECTED - Connection to 00:1f: 33:c7:e4:86 completed (auth) [id=0 id_str=] D/wpa_supplicant( 1294): wpa_driver_wext_set_operstate: operstate 0->1 (UP) D/wpa_supplicant( 1294): WEXT: Operstate: linkmode=-1, operstate=6 D/wpa_supplicant( 1294): Cancelling scan request D/wpa_supplicant( 1294): RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) D/wpa_supplicant( 1294): RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RSSI-APPROX len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RSSI len = 4, 4 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd LINKSPEED len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd LINKSPEED len = 9, 9 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd MACADDR len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd MACADDR len = 7, 7 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd BTCOEXMODE 1 len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd BTCOEXMODE 1 len = 0, 12 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd POWERMODE 1 len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd POWERMODE 1 len = 0, 11 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RXFILTER-ADD 0 len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RXFILTER-ADD 0 len = 0, 14 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RXFILTER-ADD 1 len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RXFILTER-ADD 1 len = 0, 14 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RXFILTER-ADD 3 len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RXFILTER-ADD 3 len = 0, 14 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RXFILTER-START len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RXFILTER-START len = 0, 14 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd BTCOEXSCAN-STOP len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd BTCOEXSCAN-STOP len = 0, 15 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RSSI-APPROX len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RSSI len = 4, 4 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd LINKSPEED len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd LINKSPEED len = 9, 9 D/dhcpcd ( 1309): dhcpcd 4.0.15 starting D/dhcpcd ( 1309): hardware address = 94:0c:6d:e0:14:dc D/dhcpcd ( 1309): executing `/system/etc/dhcpcd/dhcpcd-run-hooks', reason PREINIT D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='ssid' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'ssid' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='bssid' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'bssid' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='priority' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='scan_ssid' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_tx_keyidx' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_key0' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'wep_key0' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_key1' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'wep_key1' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_key2' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'wep_key2' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_key3' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'wep_key3' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='psk' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'psk' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='proto' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='key_mgmt' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='auth_alg' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='pairwise' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='group' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='eap' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'eap' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='phase2' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'phase2' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='identity' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'identity' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='anonymous_identity' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'anonymous_identity' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='password' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'password' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='client_cert' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'client_cert' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='private_key' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'private_key' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='ca_cert' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'ca_cert' D/wpa_supplicant( 1294): ap_scan = 2 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd SCAN-ACTIVE len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd SCAN-ACTIVE len = 0, 11 D/wpa_supplicant( 1294): Setting scan request: 0 sec 0 usec D/wpa_supplicant( 1294): Starting AP scan (specific SSID) D/wpa_supplicant( 1294): wpa_driver_wext_scan: specific scan = 0 D/wpa_supplicant( 1294): Scan requested (ret=0) - scan timeout 30 seconds D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd SCAN-PASSIVE len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd SCAN-PASSIVE len = 0, 12 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RSSI-APPROX len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RSSI len = 4, 4 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd LINKSPEED len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd LINKSPEED len = 9, 9 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RSSI-APPROX len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd RSSI len = 4, 4 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd LINKSPEED len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd LINKSPEED len = 9, 9 D/wpa_supplicant( 1294): RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) D/wpa_supplicant( 1294): RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added D/wpa_supplicant( 1294): Wireless event: cmd=0x8b19 len=8 D/wpa_supplicant( 1294): Received 3111 bytes of scan results (7 BSSes) D/wpa_supplicant( 1294): New scan results available D/wpa_supplicant( 1294): ap_scan = 1 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd SCAN-PASSIVE len = 4096 D/wpa_supplicant( 1294): wpa_driver_priv_driver_cmd SCAN-PASSIVE len = 0, 12 D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='ssid' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'ssid' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='bssid' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'bssid' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='priority' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='scan_ssid' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_tx_keyidx' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_key0' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'wep_key0' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_key1' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'wep_key1' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_key2' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'wep_key2' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='wep_key3' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'wep_key3' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='psk' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'psk' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='proto' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='key_mgmt' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='auth_alg' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='pairwise' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='group' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='eap' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'eap' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='phase2' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'phase2' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='identity' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'identity' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='anonymous_identity' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'anonymous_identity' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='password' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'password' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='client_cert' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'client_cert' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='private_key' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'private_key' D/wpa_supplicant( 1294): CTRL_IFACE: GET_NETWORK id=0 name='ca_cert' D/wpa_supplicant( 1294): CTRL_IFACE: Failed to get network variable 'ca_cert' On Sep 6, 10:33 pm, Irfan Sheriff <isher...@gmail.com> wrote: > All the UI is doing is calling load driver & a start supplicant followed by > running dhcp on receiving a connect from supplicant. > > If it is only showing "Disconnect->Scanning", it means the association never > went through. You should verify if all the modules are loaded after doing a > "turn on". Also, use the wpa_cli interface to debug what is going on in the > wpa_supplicant. > > Irfan > > > > On Mon, Sep 6, 2010 at 2:46 AM, Edward Pang <edward.knp...@gmail.com> wrote: > > Hi Everyone, > > > Following the information from the link below, I can access webpage by > > browser through Wifi (Beagleboard + USB dongle RT73). > >http://blog.linuxconsulting.ro/2010/04/porting-wifi-drivers-to-androi... > > > When i try to migrate the fix into froyo, Wifi is always loop in > > Scanning -> Disconnect stage after pressing Turn On Wi-fi. > > > Now, in froyo, i can get IP manually in console by both method below > > (wpa conf is using UNIX socket configuration): > > Method 1 > > -------------- > > insmod rt2x00lib.ko > > insmod rt2x00usb.ko > > insmod rt73.ko > > ifconfig wlan0 up > > wpa_supplicant -D wext -i wlan0 -dd -c wpa_supplicant.conf & > > dhcpcd -f /system/etc/dhcpcd/dhcpcd.conf -d wlan0 > > (Remark: i got "[: not found" twice after dhcpcd command, but IP can > > be updated) > > > Method 2 > > -------------- > > insmod rt2x00lib.ko > > insmod rt2x00usb.ko > > insmod rt73.ko > > start ifcfg_ralink > > start wpa_supplicant > > start dhcpcd > > > After method 2, I suppose my wpa_supplicant and dhcpcd works, and > > init.rc is right. Am I correct? > > Can anyone give me some hints or suggestion? > > > Edward Pang > > > -- > > unsubscribe: > > android-porting+unsubscr...@googlegroups.com<android-porting%2Bunsubscribe@ > > googlegroups.com> > > website:http://groups.google.com/group/android-porting -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
