Hi, Froyo is tested with Kernel 2.6.31, since you are using kernel 2.6.32 , so my recommend is you try to port Froyo with kernel 2.6.31 first . (Extract the patch from your 2.6.32 kernel and apply that patch to 2.6.31 kernel, also some feature need to be enable in the kernel config: pmem, ashmem, binder,. etc.. more detail in : Documentation/android.txt<http://android.git.kernel.org/?p=kernel/common.git;a=blob_plain;f=Documentation/android.txt;hb=HEAD> )
On Wed, Sep 8, 2010 at 2:54 PM, jayasantosh samal <joyn...@gmail.com> wrote: > hi > i am using froyo build of google android. > > > On Tue, Sep 7, 2010 at 9:16 PM, Tung Dang <tung...@gmail.com> wrote: > >> Hi, >> What version of android u are using? Is it froyo? >> >> On Sep 7, 2010 10:18 PM, "jayasantosh samal" <joyn...@gmail.com> wrote: >> >> hi all >> >> i am facing kernel panic form last 7days ,i am trying to add the >> android support in omap 2.6.32 kernel, i have also enable the kernel trace >> can any body have facing this type of problem privously, plz help me. >> >> CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), >> cr=10c53c7f >> CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction >> cache >> Machine: OMAP3 Beagle >> Board >> Memory policy: ECC disabled, Data cache >> writeback >> OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp >> ) >> SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: >> 0x100000 >> Built 1 zonelists in Zone order, mobility grouping on. Total pages: >> 64960 >> Kernel command line: console=ttyS2,115200n8 noinitrd root=/dev/mmcblk0p2 >> video=o >> mapfb.mode=dvi:1280x720mr...@50 init=/init rootfstype=ext3 rw rootdelay=1 >> nohz=o >> ff >> androidboot.console=ttyS2 >> >> PID hash table entries: 1024 (order: 0, 4096 >> bytes) >> Dentry cache hash table entries: 32768 (order: 5, 131072 >> bytes) >> Inode-cache hash table entries: 16384 (order: 4, 65536 >> bytes) >> Memory: 128MB 128MB = 256MB >> total >> Memory: 254336KB available (3988K code, 756K data, 128K init, 0K >> highmem) >> Hierarchical RCU >> implementation. >> NR_IRQS:402 >> >> Clocking rate (Crystal/Core/MPU): 26.0/332/500 >> MHz >> Reprogramming SDRC clock to 332000000 >> Hz >> GPMC revision >> 5.0 >> IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 >> interrupts >> Total of 96 interrupts on 1 active >> controller >> OMAP GPIO hardware version >> 2.5 >> OMAP clockevent source: GPTIMER12 at 32768 >> Hz >> Console: colour dummy device >> 80x30 >> Calibrating delay loop... 476.81 BogoMIPS >> (lpj=1859584) >> Mount-cache hash table entries: >> 512 >> CPU: Testing write buffer coherency: >> ok >> regulator: core version >> 0.5 >> NET: Registered protocol family >> 16 >> Found NAND on >> CS0 >> Registering NAND on >> CS0 >> OMAP DMA hardware revision >> 4.0 >> bio: create slab <bio-0> at >> 0 >> SCSI subsystem >> initialized >> usbcore: registered new interface driver >> usbfs >> usbcore: registered new interface driver >> hub >> usbcore: registered new device driver >> usb >> i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 >> kHz >> twl4030: PIH (irq 7) chaining IRQs >> 368..375 >> twl4030: power (irq 373) chaining IRQs >> 376..383 >> twl4030: gpio (irq 368) chaining IRQs >> 384..401 >> regulator: VUSB1V5: 1500 mV normal >> standby >> regulator: VUSB1V8: 1800 mV normal >> standby >> regulator: VUSB3V1: 3100 mV normal >> standby >> twl4030_usb twl4030_usb: Initialized TWL4030 USB >> module >> regulator: VMMC1: 1850 <--> 3150 mV normal >> standby >> regulator: VDAC: 1800 mV normal >> standby >> regulator: VPLL2: 1800 mV normal >> standby >> regulator: VSIM: 1800 <--> 3000 mV normal >> standby >> i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 >> kHz >> Switching to clocksource >> 32k_counter >> musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), >> debug=0 >> musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ >> 92 >> NET: Registered protocol family >> 2 >> IP route cache hash table entries: 2048 (order: 1, 8192 >> bytes) >> TCP established hash table entries: 8192 (order: 4, 65536 >> bytes) >> TCP bind hash table entries: 8192 (order: 3, 32768 >> bytes) >> TCP: Hash tables configured (established 8192 bind >> 8192) >> TCP reno >> registered >> NET: Registered protocol family >> 1 >> RPC: Registered udp transport >> module. >> RPC: Registered tcp transport >> module. >> RPC: Registered tcp NFSv4.1 backchannel transport >> module. >> NetWinder Floating Point Emulator V0.97 (double >> precision) >> ====[ backtrace testing >> ]=========== >> Testing a backtrace from process >> context. >> The following trace is a kernel self test and not a >> bug! >> [<c002e678>] (unwind_backtrace+0x0/0xe0) from [<c0075b6c>] >> (backtrace_regression >> _test+0x28/0xb0) >> >> [<c0075b6c>] (backtrace_regression_test+0x28/0xb0) from [<c002833c>] >> (do_one_ini >> tcall+0x54/0x190) >> >> [<c002833c>] (do_one_initcall+0x54/0x190) from [<c000885c>] >> (kernel_init+0x90/0x >> 108) >> >> [<c000885c>] (kernel_init+0x90/0x108) from [<c0029e50>] >> (kernel_thread_exit+0x0/ >> 0x8) >> >> Testing a backtrace from irq >> context. >> The following trace is a kernel self test and not a >> bug! >> [<c002e678>] (unwind_backtrace+0x0/0xe0) from [<c0075b34>] >> (backtrace_test_irq_c >> allback+0x8/0x18) >> >> [<c0075b34>] (backtrace_test_irq_callback+0x8/0x18) from [<c0055d90>] >> (tasklet_a >> ction+0x68/0xb8) >> >> [<c0055d90>] (tasklet_action+0x68/0xb8) from [<c0055ba0>] >> (__do_softirq+0x70/0xf >> 4) >> >> [<c0055ba0>] (__do_softirq+0x70/0xf4) from [<c0055c64>] >> (do_softirq+0x40/0x4c) >> [<c0055c64>] (do_softirq+0x40/0x4c) from [<c0055ebc>] >> (ksoftirqd+0x50/0xe4) >> [<c0055ebc>] (ksoftirqd+0x50/0xe4) from [<c0062e54>] >> (kthread+0x7c/0x84) >> [<c0062e54>] (kthread+0x7c/0x84) from [<c0029e50>] >> (kernel_thread_exit+0x0/0x8) >> Saved backtrace test >> skipped. >> ====[ end of backtrace testing >> ]==== >> ashmem: >> initialized >> VFS: Disk quotas >> dquot_6.5.2 >> Dquot-cache hash table entries: 1024 (order 0, 4096 >> bytes) >> JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, >> Inc. >> msgmni has been set to >> 497 >> alg: No test for stdrng >> (krng) >> io scheduler noop >> registered >> io scheduler anticipatory registered >> (default) >> io scheduler deadline >> registered >> io scheduler cfq >> registered >> Serial: 8250/16550 driver, 4 ports, IRQ sharing >> enabled >> serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a >> ST16654 >> serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a >> ST16654 >> serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a >> ST16654 >> console [ttyS2] >> enabled >> brd: module >> loaded >> loop: module >> loaded >> omap2-nand driver >> initializing >> NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V >> 16-bi >> t) >> >> cmdlinepart partition parsing not >> available >> Creating 5 MTD partitions on >> "omap2-nand": >> 0x000000000000-0x000000080000 : >> "X-Loader" >> 0x000000080000-0x000000260000 : >> "U-Boot" >> 0x000000260000-0x000000280000 : "U-Boot >> Env" >> 0x000000280000-0x000000680000 : >> "Kernel" >> 0x000000680000-0x000010000000 : "File >> System" >> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) >> Driver >> ehci-omap ehci-omap.0: OMAP-EHCI Host >> Controller >> ehci-omap ehci-omap.0: new USB bus registered, assigned bus number >> 1 >> ehci-omap ehci-omap.0: irq 77, io mem >> 0x48064800 >> ehci-omap ehci-omap.0: USB 2.0 started, EHCI >> 1.00 >> usb usb1: New USB device found, idVendor=1d6b, >> idProduct=0002 >> usb usb1: New USB device strings: Mfr=3, Product=2, >> SerialNumber=1 >> usb usb1: Product: OMAP-EHCI Host >> Controller >> usb usb1: Manufacturer: Linux 2.6.32-06909-g2a20002-dirty >> ehci_hcd >> usb usb1: SerialNumber: >> ehci-omap.0 >> usb usb1: configuration #1 chosen from 1 >> choice >> hub 1-0:1.0: USB hub >> found >> hub 1-0:1.0: 3 ports >> detected >> Initializing USB Mass Storage >> driver... >> usbcore: registered new interface driver >> usb-storage >> USB Mass Storage support >> registered. >> twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as >> rtc0 >> twl4030_rtc twl4030_rtc: Power up reset >> detected. >> twl4030_rtc twl4030_rtc: Enabling >> TWL4030-RTC. >> i2c /dev entries >> driver >> usbcore: registered new interface driver >> usbhid >> usbhid: v2.6:USB HID core >> driver >> logger: created 64K log >> 'log_main' >> logger: created 256K log >> 'log_events' >> logger: created 64K log >> 'log_radio' >> Advanced Linux Sound Architecture Driver Version >> 1.0.21. >> No device for DAI >> AD73311 >> No device for DAI >> AK4535 >> Cirrus Logic CS4270 ALSA SoC Codec >> Driver >> No device for DAI PCM3008 >> HiFi >> No device for DAI >> SSM2602 >> No device for DAI >> tlv320aic23 >> No device for DAI >> twl4030 >> No device for DAI twl4030 >> Voice >> No device for DAI >> UDA134X >> No device for DAI WM8510 >> HiFi >> No device for DAI >> WM8728 >> No device for DAI >> WM8750 >> No device for DAI >> WM8971 >> No device for DAI WM8990 ADC/DAC >> Primary >> No device for DAI >> omap-mcbsp-dai-0 >> No device for DAI >> omap-mcbsp-dai-1 >> No device for DAI >> omap-mcbsp-dai-2 >> No device for DAI >> omap-mcbsp-dai-3 >> No device for DAI >> omap-mcbsp-dai-4 >> OMAP3 Beagle SoC >> init >> TWL4030 Audio Codec >> init >> asoc: twl4030 <-> omap-mcbsp-dai-0 mapping >> ok >> ALSA device >> list: >> #0: omap3beagle >> (twl4030) >> TCP cubic >> registered >> NET: Registered protocol family >> 17 >> NET: Registered protocol family >> 15 >> Power Management for TI >> OMAP3. >> VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev >> 1 >> omapfb omapfb: no >> displays >> omapfb omapfb: failed to setup >> omapfb >> omapfb: probe of omapfb failed with error >> -22 >> regulator_init_complete: incomplete constraints, leaving VDVI >> on >> regulator_init_complete: incomplete constraints, leaving VDAC >> on >> twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:00 UTC >> (946684 >> 800) >> >> Waiting 1sec before mounting root >> device... >> mmc0: new high speed SD card at address >> aaaa >> mmcblk0: mmc0:aaaa SD02G 1.84 >> GiB >> mmcblk0: p1 >> p2 >> kjournald starting. Commit interval 5 >> seconds >> EXT3-fs warning: maximal mount count reached, running e2fsck is >> recommended >> EXT3 FS on mmcblk0p2, internal >> journal >> EXT3-fs: mounted filesystem with writeback data >> mode. >> VFS: Mounted root (ext3 filesystem) on device >> 179:2. >> Freeing init memory: >> 128K >> Warning: unable to open an initial >> console. >> Kernel panic - not syncing: Attempted to kill >> init! >> [<c002e678>] (unwind_backtrace+0x0/0xe0) from [<c00512bc>] >> (panic+0x40/0x110) >> [<c00512bc>] (panic+0x40/0x110) from [<c0053c88>] >> (do_exit+0x5c/0x57c) >> [<c0053c88>] (do_exit+0x5c/0x57c) from [<c0054224>] >> (do_group_exit+0x7c/0xac) >> [<c0054224>] (do_group_exit+0x7c/0xac) from [<c005cca8>] >> (get_signal_to_deliver+ >> 0x2bc/0x2ec) >> >> [<c005cca8>] (get_signal_to_deliver+0x2bc/0x2ec) from [<c002b58c>] >> (do_notify_re >> sume+0x5c/0x580) >> >> [<c002b58c>] (do_notify_resume+0x5c/0x580) from [<c0028ecc>] >> (work_pending+0x1c/ >> 0x20) >> >> >> advance thank >> jaya >> >> >> -- >> unsubscribe: >> android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> >> website: http://groups.google.com/group/android-porting >> >> -- >> unsubscribe: >> android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> >> website: http://groups.google.com/group/android-porting >> > > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
