Hi Hedwin, I have solved Timeout problem as you have said in your post.I could not see the need of SIOCSIWPRIV and vold. In my case, permission for sockets are fine. I tried both unix socket and android socket but both of them didn't work.
After solving timeout problem,I think ,WPA Supplicant is working fine. It can scan AP and tries to connect with one one AP but it fails. Here is a log I get: D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added D/wpa_supplicant( 1349): Received 731 bytes of scan results (4 BSSes) D/wpa_supplicant( 1349): Scan results: 4 I/wpa_supplicant( 1349): CTRL-EVENT-SCAN-RESULTS Ready D/wpa_supplicant( 1349): Selecting BSS from priority group 0 D/wpa_supplicant( 1349): Try to find WPA-enabled AP D/wpa_supplicant( 1349): 0: 00:12:17:65:c9:f6 ssid='Connect01' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 D/wpa_supplicant( 1349): skip - SSID mismatch D/wpa_supplicant( 1349): 1: 00:1f:ca:5f:c3:f0 ssid='NEDSCHROEF' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 D/wpa_supplicant( 1349): skip - no WPA/RSN IE D/wpa_supplicant( 1349): 2: 94:44:52:62:94:31 ssid='Belkin.3431' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 D/wpa_supplicant( 1349): skip - no WPA/RSN IE D/wpa_supplicant( 1349): 3: 00:12:17:65:d9:4e ssid='Seminar ' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 D/wpa_supplicant( 1349): skip - no WPA/RSN IE D/wpa_supplicant( 1349): Try to find non-WPA AP D/wpa_supplicant( 1349): 0: 00:12:17:65:c9:f6 ssid='Connect01' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 D/wpa_supplicant( 1349): skip - privacy mismatch D/wpa_supplicant( 1349): 1: 00:1f:ca:5f:c3:f0 ssid='NEDSCHROEF' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 D/wpa_supplicant( 1349): skip - privacy mismatch D/wpa_supplicant( 1349): 2: 94:44:52:62:94:31 ssid='Belkin.3431' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 D/wpa_supplicant( 1349): selected non-WPA AP 94:44:52:62:94:31 ssid='Belkin.3431' I/wpa_supplicant( 1349): Trying to associate with 94:44:52:62:94:31 (SSID='Belkin.3431' freq=2412 MHz) D/wpa_supplicant( 1349): Cancelling scan request D/wpa_supplicant( 1349): WPA: clearing own WPA/RSN IE D/wpa_supplicant( 1349): Automatic auth_alg selection: 0x1 D/wpa_supplicant( 1349): WPA: clearing AP WPA IE D/wpa_supplicant( 1349): WPA: clearing AP RSN IE D/wpa_supplicant( 1349): WPA: clearing own WPA/RSN IE D/wpa_supplicant( 1349): No keys have been configured - skip key clearing D/wpa_supplicant( 1349): wpa_driver_wext_set_drop_unencrypted D/wpa_supplicant( 1349): State: SCANNING -> ASSOCIATING I/wpa_supplicant( 1349): CTRL-EVENT-STATE-CHANGE id=-1 state=3 D/wpa_supplicant( 1349): wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) D/wpa_supplicant( 1349): WEXT: Operstate: linkmode=-1, operstate=5 D/wpa_supplicant( 1349): wpa_driver_wext_associate D/wpa_supplicant( 1349): Setting authentication timeout: 10 sec 0 usec D/wpa_supplicant( 1349): EAPOL: External notification - portControl=ForceAuthorized D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added D/wpa_supplicant( 1349): Wireless event: cmd=0x8b06 len=8 D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added D/wpa_supplicant( 1349): Wireless event: cmd=0x8b04 len=12 D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added D/wpa_supplicant( 1349): Wireless event: cmd=0x8b1a len=19 Interface wlan0 is added a lot of times.why?? I also get following error. E/WifiHW ( 1178): Unable to open connection to supplicant on "/data/system/wpa_supplicant/wlan0": No such file or directory With Regards, Manish Shakya On Wed, Oct 13, 2010 at 10:23 AM, hedwin <hedwin.kon...@gmail.com> wrote: > > kernel version is 2.6.32 but it is done in eclair. But what I've seen > sofar is that there is not that much difference compared to froyo. > > ok, let me know if you run into issues. > > Cheers, > Hedwin > > > On Wed, Oct 13, 2010 at 4:07 PM, manish shakya > <manishshakya...@gmail.com> wrote: > > Hi Hedwin, > > > > Thanks. Good to know you made wifi working. Which version of kernel are > > you using ? I am using kernel 2.6.32 and Android 2.2 . > > > > I am going through you posts in rowboat mailing list. I will update my > > findings. > > > > > > On Wed, Oct 13, 2010 at 5:49 AM, hedwin <hedwin.kon...@gmail.com> wrote: > >> > >> Hi > >> > >> Made android wifi work on a IGEPv2 board. This board also uses a Marvell > >> chip. > >> You can find my patches in the android rowboat mailing list. > >> > >> Btw the problem you encounter is due to the fact that the mmc gets > >> disabled while wifi is still operational. > >> > >> Hedwin. > >> > >> On Tue, Oct 12, 2010 at 4:56 PM, Manish <manishshakya...@gmail.com> wrote: > >> > Hi , > >> > > >> > There is no place to generate those bin files. > >> > > >> > On Oct 12, 8:01 am, manish shakya <manishshakya...@gmail.com> wrote: > >> >> Hi Hairui > >> >> > >> >> Thanks for your response. > >> >> > >> >> Let me try to re-compiling the modules and generate sd8686.bin and > >> >> sd8686_helper.bin files. > >> >> BTW, what are those bin files for? > >> >> > >> >> ManishOn Mon, Oct 11, 2010 at 11:11 PM, hairui <szhai...@gmail.com> > >> >> wrote: > >> >> > Maybe you should re-compile the modules for yourself arch which you > >> >> > chose to use the prebuild one. > >> >> > >> >> > On 10月12日, 上午2时50分, manish shakya <manishshakya...@gmail.com> wrote: > >> >> > > Hi everyone, > >> >> > >> >> > > I am trying to make Marvell Wifi to work on overo board running > >> >> > > Android. > >> >> > I > >> >> > > am using 2.6.32 linux kernel and Android 2.2. I have put all files( > >> >> > > libertas_sdio.ko, sd8686.bin,sd8686_helper.bin etc) in required > >> >> > > place. > >> >> > > I am using d8686.bin,sd8686_helper.bin from console prebuilt image > >> >> > (2.6.34 > >> >> > > linux ) from gumstix.It seems that libertas driver is loaded and > >> >> > > driver > >> >> > is > >> >> > > able to find MAC address of the chip. But the problem is there are > >> >> > > a lot > >> >> > of > >> >> > > time out after that. It seems chip is not getting > >> >> > > command send by the processor. Below is log that I get: > >> >> > >> >> > > libertas_sdio: Libertas SDIO driver > >> >> > > libertas_sdio: Copyright Pierre Ossman > >> >> > > libertas_sdio mmc1:0001:1: firmware: requesting sd8686_helper.bin > >> >> > > init: untracked pid 1221 exited > >> >> > > libertas_sdio mmc1:0001:1: firmware: requesting sd8686.bin > >> >> > > init: untracked pid 1224 exited > >> >> > > libertas: 00:19:88:37:0e:dd, fw 9.70.7p0, cap 0x00000303 > >> >> > > libertas: wlan0: Marvell WLAN 802.11 adapter > >> >> > > libertas: command 0x0006 timed out > >> >> > > libertas: requeueing command 0x0006 due to timeout (#1) > >> >> > > libertas: Received result 0 to command 6 after 1 retries > >> >> > > libertas: command 0x0013 timed out > >> >> > > libertas: requeueing command 0x0013 due to timeout (#1) > >> >> > > libertas: command 0x0013 timed out > >> >> > > libertas: requeueing command 0x0013 due to timeout (#2) > >> >> > > libertas: command 0x0013 timed out > >> >> > > libertas: requeueing command 0x0013 due to timeout (#3) > >> >> > > libertas: command 0x0013 timed out > >> >> > > libertas: Excessive timeouts submitting command 0x0013 > >> >> > > libertas: PREP_CMD: command 0x0013 failed: -110 > >> >> > > libertas: command 0x0010 timed out > >> >> > > libertas: requeueing command 0x0010 due to timeout (#1) > >> >> > > libertas: command 0x0010 timed out > >> >> > > libertas: requeueing command 0x0010 due to timeout (#2) > >> >> > > libertas: command 0x0010 timed out > >> >> > > libertas: requeueing command 0x0010 due to timeout (#3) > >> >> > > libertas: command 0x0010 timed out > >> >> > > libertas: Excessive timeouts submitting command 0x0010 > >> >> > > libertas: command 0x0010 timed out > >> >> > > libertas: requeueing command 0x0010 due to timeout (#1) > >> >> > > libertas: command 0x0010 timed out > >> >> > > libertas: requeueing command 0x0010 due to timeout (#2) > >> >> > > libertas: command 0x0010 timed out > >> >> > > libertas: requeueing command 0x0010 due to timeout (#3) > >> >> > > libertas: command 0x0010 timed out > >> >> > > libertas: Excessive timeouts submitting command 0x0010 > >> >> > > libertas: command 0x0006 timed out > >> >> > > libertas: requeueing command 0x0006 due to timeout (#1) > >> >> > > libertas: command 0x0006 timed out > >> >> > > libertas: requeueing command 0x0006 due to timeout (#2) > >> >> > > libertas: command 0x0006 timed out > >> >> > > libertas: requeueing command 0x0006 due to timeout (#3) > >> >> > > libertas: command 0x0006 timed out > >> >> > > libertas: Excessive timeouts submitting command 0x0006 > >> >> > > libertas: PREP_CMD: command 0x0006 failed: -110 > >> >> > > libertas: SCAN_CMD failed > >> >> > > libertas: command 0x0028 timed out > >> >> > > libertas: requeueing command 0x0028 due to timeout (#1) > >> >> > > libertas: command 0x0028 timed out > >> >> > > libertas: requeueing command 0x0028 due to timeout (#2) > >> >> > > libertas: command 0x0028 timed out > >> >> > > libertas: requeueing command 0x0028 due to timeout (#3) > >> >> > > libertas: command 0x0028 timed out > >> >> > > libertas: Excessive timeouts submitting command 0x0028 > >> >> > > libertas: command 0x002f timed out > >> >> > > libertas: requeueing command 0x002f due to timeout (#1) > >> >> > > libertas: command 0x002f timed out > >> >> > > libertas: requeueing command 0x002f due to timeout (#2) > >> >> > > libertas: command 0x002f timed out > >> >> > > libertas: requeueing command 0x002f due to timeout (#3) > >> >> > > libertas: command 0x002f timed out > >> >> > > libertas: Excessive timeouts submitting command 0x002f > >> >> > > libertas: PREP_CMD: command 0x002f failed: -110 > >> >> > >> >> > > Any ideas would be really appreciated. > >> >> > >> >> > > Manish Shakya > >> >> > >> >> > -- > >> >> > unsubscribe: > >> >> > android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> <android-porting%2bunsubscr...@googlegroups.com<android-porting%252bunsubscr...@googlegroups.com> > > >> >> > website:http://groups.google.com/group/android-porting > >> >> > >> >> > >> > > >> > -- > >> > unsubscribe: > >> > android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> > >> > website: http://groups.google.com/group/android-porting > >> > > > > > > > > > -- > > Manish Shakya > > http://www.manishshakya.com.np > > http://secs.oakland.edu/~ganesan/iMX/ > > -- Manish Shakya http://www.manishshakya.com.np http://secs.oakland.edu/~ganesan/iMX/ -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
