Thanks..
2010/10/13 hedwin <hedwin.kon...@gmail.com> > Attached. > > Change is in drivers/mmc/host/omap_hsmmc.c > For now I commented the clk_disable. Need to take a closer to figure > out what is wrong. > Also saw a thread in the linux-omap kernel mailing list about the very > problem. > > Hedwin > > > On Wed, Oct 13, 2010 at 11:32 PM, manish shakya <msha...@oakland.edu> > wrote: > > Hi Hedwin, > > > > Didn't find that patch. Can you send me link? > > > > On Thu, Oct 14, 2010 at 1:08 AM, hedwin <hedwin.kon...@gmail.com> wrote: > >> > >> The kernel patch (0001-Update-for-IGEPv2-Wifi-support.patch) already > >> adds the basic SIOCSIWPRIV stuff to the libertas wireless driver. > >> In eclair it is good enough to get wireless running. > >> > >> Hedwin > >> > >> > >> > >> On Wed, Oct 13, 2010 at 10:58 PM, manish shakya <msha...@oakland.edu> > >> wrote: > >> > > >> > I came to know SIOCSIWPRIV is required in froyo also. Do you have any > >> > idea > >> > how it should be implement SIOCSIWPRIV? > >> > > >> > > >> > On Wed, Oct 13, 2010 at 11:57 PM, hedwin <hedwin.kon...@gmail.com> > >> > wrote: > >> >> > >> >> Hmm, interesting. Thnx for the feedback. > >> >> > >> >> The vold change was needed in eclair to ignore no SD-card readers > >> >> connected to an mmc interface but vold has changed in froyo so a > >> >> different setup in vold > >> >> could that be the reason that it is not needed anymore. > >> >> Same for SIOCSIWPRIV it is required in by the eclair Wifi layer > >> >> without it doesn't work > >> >> > >> >> The error your seeing is also socket related, it is the connection > >> >> between Wifi and wpa_supplicant. Since creating sockets this way gave > >> >> me > >> >> quite a headache I switched to using the sockets in the android > >> >> namespace. > >> >> > >> >> Hedwin > >> >> > >> >> > >> >> On Wed, Oct 13, 2010 at 8:34 PM, manish shakya <msha...@oakland.edu> > >> >> wrote: > >> >> > Hi Hedwin, > >> >> > > >> >> > I have solved Timeout problem as you have said in your post.I could > >> >> > not > >> >> > see > >> >> > the need of SIOCSIWPRIV and vold. In my case, permission for > sockets > >> >> > are > >> >> > fine. I tried both unix socket and android socket but both of them > >> >> > didn't > >> >> > work. > >> >> > > >> >> > After solving timeout problem,I think ,WPA Supplicant is working > >> >> > fine. > >> >> > It > >> >> > can scan AP and tries to connect with one one AP but it fails. Here > >> >> > is a > >> >> > log > >> >> > I get: > >> >> > > >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 > >> >> > ([UP]) > >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface > 'wlan0' > >> >> > added > >> >> > D/wpa_supplicant( 1349): Received 731 bytes of scan results (4 > BSSes) > >> >> > D/wpa_supplicant( 1349): Scan results: 4 > >> >> > I/wpa_supplicant( 1349): CTRL-EVENT-SCAN-RESULTS Ready > >> >> > D/wpa_supplicant( 1349): Selecting BSS from priority group 0 > >> >> > D/wpa_supplicant( 1349): Try to find WPA-enabled AP > >> >> > D/wpa_supplicant( 1349): 0: 00:12:17:65:c9:f6 ssid='Connect01' > >> >> > wpa_ie_len=26 > >> >> > rsn_ie_len=0 caps=0x11 > >> >> > D/wpa_supplicant( 1349): skip - SSID mismatch > >> >> > D/wpa_supplicant( 1349): 1: 00:1f:ca:5f:c3:f0 ssid='NEDSCHROEF' > >> >> > wpa_ie_len=0 > >> >> > rsn_ie_len=0 caps=0x11 > >> >> > D/wpa_supplicant( 1349): skip - no WPA/RSN IE > >> >> > D/wpa_supplicant( 1349): 2: 94:44:52:62:94:31 ssid='Belkin.3431' > >> >> > wpa_ie_len=0 rsn_ie_len=0 caps=0x1 > >> >> > D/wpa_supplicant( 1349): skip - no WPA/RSN IE > >> >> > D/wpa_supplicant( 1349): 3: 00:12:17:65:d9:4e ssid='Seminar ' > >> >> > wpa_ie_len=0 > >> >> > rsn_ie_len=0 caps=0x1 > >> >> > D/wpa_supplicant( 1349): skip - no WPA/RSN IE > >> >> > D/wpa_supplicant( 1349): Try to find non-WPA AP > >> >> > D/wpa_supplicant( 1349): 0: 00:12:17:65:c9:f6 ssid='Connect01' > >> >> > wpa_ie_len=26 > >> >> > rsn_ie_len=0 caps=0x11 > >> >> > D/wpa_supplicant( 1349): skip - privacy mismatch > >> >> > D/wpa_supplicant( 1349): 1: 00:1f:ca:5f:c3:f0 ssid='NEDSCHROEF' > >> >> > wpa_ie_len=0 > >> >> > rsn_ie_len=0 caps=0x11 > >> >> > D/wpa_supplicant( 1349): skip - privacy mismatch > >> >> > D/wpa_supplicant( 1349): 2: 94:44:52:62:94:31 ssid='Belkin.3431' > >> >> > wpa_ie_len=0 rsn_ie_len=0 caps=0x1 > >> >> > D/wpa_supplicant( 1349): selected non-WPA AP 94:44:52:62:94:31 > >> >> > ssid='Belkin.3431' > >> >> > I/wpa_supplicant( 1349): Trying to associate with 94:44:52:62:94:31 > >> >> > (SSID='Belkin.3431' freq=2412 MHz) > >> >> > D/wpa_supplicant( 1349): Cancelling scan request > >> >> > D/wpa_supplicant( 1349): WPA: clearing own WPA/RSN IE > >> >> > D/wpa_supplicant( 1349): Automatic auth_alg selection: 0x1 > >> >> > D/wpa_supplicant( 1349): WPA: clearing AP WPA IE > >> >> > D/wpa_supplicant( 1349): WPA: clearing AP RSN IE > >> >> > D/wpa_supplicant( 1349): WPA: clearing own WPA/RSN IE > >> >> > D/wpa_supplicant( 1349): No keys have been configured - skip key > >> >> > clearing > >> >> > D/wpa_supplicant( 1349): wpa_driver_wext_set_drop_unencrypted > >> >> > D/wpa_supplicant( 1349): State: SCANNING -> ASSOCIATING > >> >> > I/wpa_supplicant( 1349): CTRL-EVENT-STATE-CHANGE id=-1 state=3 > >> >> > D/wpa_supplicant( 1349): wpa_driver_wext_set_operstate: operstate > >> >> > 0->0 > >> >> > (DORMANT) > >> >> > D/wpa_supplicant( 1349): WEXT: Operstate: linkmode=-1, operstate=5 > >> >> > D/wpa_supplicant( 1349): wpa_driver_wext_associate > >> >> > D/wpa_supplicant( 1349): Setting authentication timeout: 10 sec 0 > >> >> > usec > >> >> > D/wpa_supplicant( 1349): EAPOL: External notification - > >> >> > portControl=ForceAuthorized > >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 > >> >> > ([UP]) > >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface > 'wlan0' > >> >> > added > >> >> > D/wpa_supplicant( 1349): Wireless event: cmd=0x8b06 len=8 > >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 > >> >> > ([UP]) > >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface > 'wlan0' > >> >> > added > >> >> > D/wpa_supplicant( 1349): Wireless event: cmd=0x8b04 len=12 > >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 ifi_flags=0x1003 > >> >> > ([UP]) > >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: Interface > 'wlan0' > >> >> > added > >> >> > D/wpa_supplicant( 1349): Wireless event: cmd=0x8b1a len=19 > >> >> > > >> >> > > >> >> > Interface wlan0 is added a lot of times.why?? > >> >> > > >> >> > > >> >> > I also get following error. > >> >> > E/WifiHW ( 1178): Unable to open connection to supplicant on > >> >> > "/data/system/wpa_supplicant/wlan0": No such file or directory > >> >> > > >> >> > > >> >> > With Regards, > >> >> > Manish Shakya > >> >> > > >> >> > On Wed, Oct 13, 2010 at 10:23 AM, hedwin <hedwin.kon...@gmail.com> > >> >> > wrote: > >> >> >> > >> >> >> kernel version is 2.6.32 but it is done in eclair. But what I've > >> >> >> seen > >> >> >> sofar is that there is not that much difference compared to froyo. > >> >> >> > >> >> >> ok, let me know if you run into issues. > >> >> >> > >> >> >> Cheers, > >> >> >> Hedwin > >> >> >> > >> >> >> > >> >> >> On Wed, Oct 13, 2010 at 4:07 PM, manish shakya > >> >> >> <manishshakya...@gmail.com> wrote: > >> >> >> > Hi Hedwin, > >> >> >> > > >> >> >> > Thanks. Good to know you made wifi working. Which version of > >> >> >> > kernel > >> >> >> > are > >> >> >> > you using ? I am using kernel 2.6.32 and Android 2.2 . > >> >> >> > > >> >> >> > I am going through you posts in rowboat mailing list. I will > >> >> >> > update > >> >> >> > my > >> >> >> > findings. > >> >> >> > > >> >> >> > > >> >> >> > On Wed, Oct 13, 2010 at 5:49 AM, hedwin < > hedwin.kon...@gmail.com> > >> >> >> > wrote: > >> >> >> >> > >> >> >> >> Hi > >> >> >> >> > >> >> >> >> Made android wifi work on a IGEPv2 board. This board also uses > a > >> >> >> >> Marvell > >> >> >> >> chip. > >> >> >> >> You can find my patches in the android rowboat mailing list. > >> >> >> >> > >> >> >> >> Btw the problem you encounter is due to the fact that the mmc > >> >> >> >> gets > >> >> >> >> disabled while wifi is still operational. > >> >> >> >> > >> >> >> >> Hedwin. > >> >> >> >> > >> >> >> >> On Tue, Oct 12, 2010 at 4:56 PM, Manish > >> >> >> >> <manishshakya...@gmail.com> > >> >> >> >> wrote: > >> >> >> >> > Hi , > >> >> >> >> > > >> >> >> >> > There is no place to generate those bin files. > >> >> >> >> > > >> >> >> >> > On Oct 12, 8:01 am, manish shakya <manishshakya...@gmail.com > > > >> >> >> >> > wrote: > >> >> >> >> >> Hi Hairui > >> >> >> >> >> > >> >> >> >> >> Thanks for your response. > >> >> >> >> >> > >> >> >> >> >> Let me try to re-compiling the modules and generate > >> >> >> >> >> sd8686.bin > >> >> >> >> >> and > >> >> >> >> >> sd8686_helper.bin files. > >> >> >> >> >> BTW, what are those bin files for? > >> >> >> >> >> > >> >> >> >> >> ManishOn Mon, Oct 11, 2010 at 11:11 PM, hairui > >> >> >> >> >> <szhai...@gmail.com> > >> >> >> >> >> wrote: > >> >> >> >> >> > Maybe you should re-compile the modules for yourself arch > >> >> >> >> >> > which > >> >> >> >> >> > you > >> >> >> >> >> > chose to use the prebuild one. > >> >> >> >> >> > >> >> >> >> >> > On 10月12日, 上午2时50分, manish shakya > >> >> >> >> >> > <manishshakya...@gmail.com> > >> >> >> >> >> > wrote: > >> >> >> >> >> > > Hi everyone, > >> >> >> >> >> > >> >> >> >> >> > > I am trying to make Marvell Wifi to work on overo board > >> >> >> >> >> > > running > >> >> >> >> >> > > Android. > >> >> >> >> >> > I > >> >> >> >> >> > > am using 2.6.32 linux kernel and Android 2.2. I have put > >> >> >> >> >> > > all > >> >> >> >> >> > > files( > >> >> >> >> >> > > libertas_sdio.ko, sd8686.bin,sd8686_helper.bin etc) in > >> >> >> >> >> > > required > >> >> >> >> >> > > place. > >> >> >> >> >> > > I am using d8686.bin,sd8686_helper.bin from console > >> >> >> >> >> > > prebuilt > >> >> >> >> >> > > image > >> >> >> >> >> > (2.6.34 > >> >> >> >> >> > > linux ) from gumstix.It seems that libertas driver is > >> >> >> >> >> > > loaded > >> >> >> >> >> > > and > >> >> >> >> >> > > driver > >> >> >> >> >> > is > >> >> >> >> >> > > able to find MAC address of the chip. But the problem is > >> >> >> >> >> > > there > >> >> >> >> >> > > are > >> >> >> >> >> > > a lot > >> >> >> >> >> > of > >> >> >> >> >> > > time out after that. It seems chip is not getting > >> >> >> >> >> > > command send by the processor. Below is log that I get: > >> >> >> >> >> > >> >> >> >> >> > > libertas_sdio: Libertas SDIO driver > >> >> >> >> >> > > libertas_sdio: Copyright Pierre Ossman > >> >> >> >> >> > > libertas_sdio mmc1:0001:1: firmware: requesting > >> >> >> >> >> > > sd8686_helper.bin > >> >> >> >> >> > > init: untracked pid 1221 exited > >> >> >> >> >> > > libertas_sdio mmc1:0001:1: firmware: requesting > sd8686.bin > >> >> >> >> >> > > init: untracked pid 1224 exited > >> >> >> >> >> > > libertas: 00:19:88:37:0e:dd, fw 9.70.7p0, cap 0x00000303 > >> >> >> >> >> > > libertas: wlan0: Marvell WLAN 802.11 adapter > >> >> >> >> >> > > libertas: command 0x0006 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0006 due to timeout (#1) > >> >> >> >> >> > > libertas: Received result 0 to command 6 after 1 retries > >> >> >> >> >> > > libertas: command 0x0013 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0013 due to timeout (#1) > >> >> >> >> >> > > libertas: command 0x0013 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0013 due to timeout (#2) > >> >> >> >> >> > > libertas: command 0x0013 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0013 due to timeout (#3) > >> >> >> >> >> > > libertas: command 0x0013 timed out > >> >> >> >> >> > > libertas: Excessive timeouts submitting command 0x0013 > >> >> >> >> >> > > libertas: PREP_CMD: command 0x0013 failed: -110 > >> >> >> >> >> > > libertas: command 0x0010 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout (#1) > >> >> >> >> >> > > libertas: command 0x0010 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout (#2) > >> >> >> >> >> > > libertas: command 0x0010 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout (#3) > >> >> >> >> >> > > libertas: command 0x0010 timed out > >> >> >> >> >> > > libertas: Excessive timeouts submitting command 0x0010 > >> >> >> >> >> > > libertas: command 0x0010 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout (#1) > >> >> >> >> >> > > libertas: command 0x0010 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout (#2) > >> >> >> >> >> > > libertas: command 0x0010 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0010 due to timeout (#3) > >> >> >> >> >> > > libertas: command 0x0010 timed out > >> >> >> >> >> > > libertas: Excessive timeouts submitting command 0x0010 > >> >> >> >> >> > > libertas: command 0x0006 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0006 due to timeout (#1) > >> >> >> >> >> > > libertas: command 0x0006 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0006 due to timeout (#2) > >> >> >> >> >> > > libertas: command 0x0006 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0006 due to timeout (#3) > >> >> >> >> >> > > libertas: command 0x0006 timed out > >> >> >> >> >> > > libertas: Excessive timeouts submitting command 0x0006 > >> >> >> >> >> > > libertas: PREP_CMD: command 0x0006 failed: -110 > >> >> >> >> >> > > libertas: SCAN_CMD failed > >> >> >> >> >> > > libertas: command 0x0028 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0028 due to timeout (#1) > >> >> >> >> >> > > libertas: command 0x0028 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0028 due to timeout (#2) > >> >> >> >> >> > > libertas: command 0x0028 timed out > >> >> >> >> >> > > libertas: requeueing command 0x0028 due to timeout (#3) > >> >> >> >> >> > > libertas: command 0x0028 timed out > >> >> >> >> >> > > libertas: Excessive timeouts submitting command 0x0028 > >> >> >> >> >> > > libertas: command 0x002f timed out > >> >> >> >> >> > > libertas: requeueing command 0x002f due to timeout (#1) > >> >> >> >> >> > > libertas: command 0x002f timed out > >> >> >> >> >> > > libertas: requeueing command 0x002f due to timeout (#2) > >> >> >> >> >> > > libertas: command 0x002f timed out > >> >> >> >> >> > > libertas: requeueing command 0x002f due to timeout (#3) > >> >> >> >> >> > > libertas: command 0x002f timed out > >> >> >> >> >> > > libertas: Excessive timeouts submitting command 0x002f > >> >> >> >> >> > > libertas: PREP_CMD: command 0x002f failed: -110 > >> >> >> >> >> > >> >> >> >> >> > > Any ideas would be really appreciated. > >> >> >> >> >> > >> >> >> >> >> > > Manish Shakya > >> >> >> >> >> > >> >> >> >> >> > -- > >> >> >> >> >> > unsubscribe: > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> > <android-porting%2bunsubscr...@googlegroups.com<android-porting%252bunsubscr...@googlegroups.com> > > > >> >> >> >> >> > website:http://groups.google.com/group/android-porting > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > > >> >> >> >> > -- > >> >> >> >> > unsubscribe: > >> >> >> >> > android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> > >> >> >> >> > website: http://groups.google.com/group/android-porting > >> >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> > -- > >> >> >> > Manish Shakya > >> >> >> > http://www.manishshakya.com.np > >> >> >> > http://secs.oakland.edu/~ganesan/iMX/ > >> >> >> > > >> >> > > >> >> > > >> >> > > >> >> > -- > >> >> > Manish Shakya > >> >> > http://www.manishshakya.com.np > >> >> > http://secs.oakland.edu/~ganesan/iMX/ > >> >> > > >> > > >> > > >> > > >> > -- > >> > Manish Shakya > >> > http://www.manishshakya.com.np > >> > http://secs.oakland.edu/~ganesan/iMX/ > >> > > >> > >> -- > >> unsubscribe: > >> android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> > >> website: http://groups.google.com/group/android-porting > > > > > > > > -- > > Manish Shakya > > http://www.manishshakya.com.np > > http://secs.oakland.edu/~ganesan/iMX/ > > > -- Manish Shakya http://www.manishshakya.com.np http://secs.oakland.edu/~ganesan/iMX/ -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
