Manish, what do you use, aosp or rowboat? 2010/10/19 manish shakya <msha...@oakland.edu>: > Obtaining IP Problem: Yes, it will take a while to get IP but eventually it > will get IP. Sometimes, I have to try 5/6 times to connect with AP. > > > > 2010/10/19 manish shakya <manishshakya...@gmail.com> >> >> Hi Hedwin, >> >> >> In froyo, Android scan AP at the boot time only. When it is running , it >> is not able to scan AP. >> >> 2010/10/19 hedwin <hedwin.kon...@gmail.com> >>> >>> ok, guess your using froyo as well, right? since eclair doesn't have this >>> issue. >>> >>> As mentioned the behaviour I have is that when I enable it the first >>> time it has this behaviour but when it reboot the >>> system it got an IP address. Is this similar to what you observe? >>> >>> Hedwin >>> >>> 2010/10/19 Manav Gautama <bandwidthcru...@gmail.com>: >>> > 2010/10/19 hedwin <hedwin.kon...@gmail.com> >>> >> >>> >> Manav, >>> >> >>> >> Which android are you using? aosp or rowboat. Reason I am asking is >>> >> that I have the same issue you mention but I use android rowboat >>> >> (http://code.google.com/p/rowboat/) >>> > >>> > >>> > rowboat >>> > >>> >> >>> >> which has added some additonal stuff to manage ethernet. So I was >>> >> wondering if this issue is caused by the added ethernet stuff or not. >>> >> The issue only occurs when I do a clean start after that I works fine, >>> >> which is still odd though. >>> >> >>> >> Hedwin >>> >> >>> >> 2010/10/19 Manav Gautama <bandwidthcru...@gmail.com>: >>> >> > Hi Manish, >>> >> > 2010/10/14 manish shakya <msha...@oakland.edu> >>> >> >> >>> >> >> I am connected to one of the AP and I could ping. >>> >> >> >>> >> > >>> >> > What was the problem with the loop on scanning ? I am noticing the >>> >> > same >>> >> > behaviour. >>> >> > Says obtaining IP address and doesnt go ahead. >>> >> > >>> >> >> >>> >> >> 2010/10/14 manish shakya <manishshakya...@gmail.com> >>> >> >>> >>> >> >>> Hi Hedwin, >>> >> >>> >>> >> >>> Thanks for you patch. Now , Android Wifi Settings GUI is >>> >> >>> working.I >>> >> >>> can >>> >> >>> see list wireless networks available. >>> >> >>> >>> >> >>> Those are the things I did >>> >> >>> 1) in drivers/mmc/host/omap_hsmmc.c I did following >>> >> >>> >>> >> >>> static const struct mmc_host_ops omap_hsmmc_ops = { >>> >> >>> .enable = omap_hsmmc_enable_fclk, >>> >> >>> // .disable = omap_hsmmc_disable_fclk, >>> >> >>> .request = omap_hsmmc_request, >>> >> >>> ... >>> >> >>> >>> >> >>> 2) Used SIOCSIWPRIV from you patch. >>> >> >>> >>> >> >>> 3) Used Android Socket >>> >> >>> >>> >> >>> Till now, I haven't seen vold error. >>> >> >>> >>> >> >>> Problems that I am facing right now. >>> >> >>> 1) Wifi is not able to connect with AP. Wifi is always in scanning >>> >> >>> mode. >>> >> >>> When I try to connect with AP, GUI Shows Obaintaing IP form XXYY >>> >> >>> then >>> >> >>> show >>> >> >>> DISCONNECTED and then shows Scanning >>> >> >>> 2) Once I turned off WIfi. I can't turn it on again. >>> >> >>> >>> >> >>> I guess problem is in dhcp. >>> >> >>> >>> >> >>> With Regards, >>> >> >>> Manish >>> >> >>> 2010/10/13 manish shakya <msha...@oakland.edu> >>> >> >>>> >>> >> >>>> Thanks.. >>> >> >>>> >>> >> >>>> 2010/10/13 hedwin <hedwin.kon...@gmail.com> >>> >> >>>>> >>> >> >>>>> Attached. >>> >> >>>>> >>> >> >>>>> Change is in drivers/mmc/host/omap_hsmmc.c >>> >> >>>>> For now I commented the clk_disable. Need to take a closer to >>> >> >>>>> figure >>> >> >>>>> out what is wrong. >>> >> >>>>> Also saw a thread in the linux-omap kernel mailing list about >>> >> >>>>> the >>> >> >>>>> very >>> >> >>>>> problem. >>> >> >>>>> >>> >> >>>>> Hedwin >>> >> >>>>> >>> >> >>>>> >>> >> >>>>> On Wed, Oct 13, 2010 at 11:32 PM, manish shakya >>> >> >>>>> <msha...@oakland.edu> >>> >> >>>>> wrote: >>> >> >>>>> > Hi Hedwin, >>> >> >>>>> > >>> >> >>>>> > Didn't find that patch. Can you send me link? >>> >> >>>>> > >>> >> >>>>> > On Thu, Oct 14, 2010 at 1:08 AM, hedwin >>> >> >>>>> > <hedwin.kon...@gmail.com> >>> >> >>>>> > wrote: >>> >> >>>>> >> >>> >> >>>>> >> The kernel patch (0001-Update-for-IGEPv2-Wifi-support.patch) >>> >> >>>>> >> already >>> >> >>>>> >> adds the basic SIOCSIWPRIV stuff to the libertas wireless >>> >> >>>>> >> driver. >>> >> >>>>> >> In eclair it is good enough to get wireless running. >>> >> >>>>> >> >>> >> >>>>> >> Hedwin >>> >> >>>>> >> >>> >> >>>>> >> >>> >> >>>>> >> >>> >> >>>>> >> On Wed, Oct 13, 2010 at 10:58 PM, manish shakya >>> >> >>>>> >> <msha...@oakland.edu> >>> >> >>>>> >> wrote: >>> >> >>>>> >> > >>> >> >>>>> >> > I came to know SIOCSIWPRIV is required in froyo also. Do >>> >> >>>>> >> > you >>> >> >>>>> >> > have >>> >> >>>>> >> > any >>> >> >>>>> >> > idea >>> >> >>>>> >> > how it should be implement SIOCSIWPRIV? >>> >> >>>>> >> > >>> >> >>>>> >> > >>> >> >>>>> >> > On Wed, Oct 13, 2010 at 11:57 PM, hedwin >>> >> >>>>> >> > <hedwin.kon...@gmail.com> >>> >> >>>>> >> > wrote: >>> >> >>>>> >> >> >>> >> >>>>> >> >> Hmm, interesting. Thnx for the feedback. >>> >> >>>>> >> >> >>> >> >>>>> >> >> The vold change was needed in eclair to ignore no SD-card >>> >> >>>>> >> >> readers >>> >> >>>>> >> >> connected to an mmc interface but vold has changed in >>> >> >>>>> >> >> froyo so >>> >> >>>>> >> >> a >>> >> >>>>> >> >> different setup in vold >>> >> >>>>> >> >> could that be the reason that it is not needed anymore. >>> >> >>>>> >> >> Same for SIOCSIWPRIV it is required in by the eclair Wifi >>> >> >>>>> >> >> layer >>> >> >>>>> >> >> without it doesn't work >>> >> >>>>> >> >> >>> >> >>>>> >> >> The error your seeing is also socket related, it is the >>> >> >>>>> >> >> connection >>> >> >>>>> >> >> between Wifi and wpa_supplicant. Since creating sockets >>> >> >>>>> >> >> this >>> >> >>>>> >> >> way >>> >> >>>>> >> >> gave >>> >> >>>>> >> >> me >>> >> >>>>> >> >> quite a headache I switched to using the sockets in the >>> >> >>>>> >> >> android >>> >> >>>>> >> >> namespace. >>> >> >>>>> >> >> >>> >> >>>>> >> >> Hedwin >>> >> >>>>> >> >> >>> >> >>>>> >> >> >>> >> >>>>> >> >> On Wed, Oct 13, 2010 at 8:34 PM, manish shakya >>> >> >>>>> >> >> <msha...@oakland.edu> >>> >> >>>>> >> >> wrote: >>> >> >>>>> >> >> > Hi Hedwin, >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > I have solved Timeout problem as you have said in your >>> >> >>>>> >> >> > post.I >>> >> >>>>> >> >> > could >>> >> >>>>> >> >> > not >>> >> >>>>> >> >> > see >>> >> >>>>> >> >> > the need of SIOCSIWPRIV and vold. In my case, permission >>> >> >>>>> >> >> > for >>> >> >>>>> >> >> > sockets >>> >> >>>>> >> >> > are >>> >> >>>>> >> >> > fine. I tried both unix socket and android socket but >>> >> >>>>> >> >> > both >>> >> >>>>> >> >> > of >>> >> >>>>> >> >> > them >>> >> >>>>> >> >> > didn't >>> >> >>>>> >> >> > work. >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > After solving timeout problem,I think ,WPA Supplicant is >>> >> >>>>> >> >> > working >>> >> >>>>> >> >> > fine. >>> >> >>>>> >> >> > It >>> >> >>>>> >> >> > can scan AP and tries to connect with one one AP but it >>> >> >>>>> >> >> > fails. >>> >> >>>>> >> >> > Here >>> >> >>>>> >> >> > is a >>> >> >>>>> >> >> > log >>> >> >>>>> >> >> > I get: >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 >>> >> >>>>> >> >> > ifi_flags=0x1003 >>> >> >>>>> >> >> > ([UP]) >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: >>> >> >>>>> >> >> > Interface >>> >> >>>>> >> >> > 'wlan0' >>> >> >>>>> >> >> > added >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Received 731 bytes of scan >>> >> >>>>> >> >> > results >>> >> >>>>> >> >> > (4 >>> >> >>>>> >> >> > BSSes) >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Scan results: 4 >>> >> >>>>> >> >> > I/wpa_supplicant( 1349): CTRL-EVENT-SCAN-RESULTS Ready >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Selecting BSS from priority >>> >> >>>>> >> >> > group 0 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Try to find WPA-enabled AP >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): 0: 00:12:17:65:c9:f6 >>> >> >>>>> >> >> > ssid='Connect01' >>> >> >>>>> >> >> > wpa_ie_len=26 >>> >> >>>>> >> >> > rsn_ie_len=0 caps=0x11 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): skip - SSID mismatch >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): 1: 00:1f:ca:5f:c3:f0 >>> >> >>>>> >> >> > ssid='NEDSCHROEF' >>> >> >>>>> >> >> > wpa_ie_len=0 >>> >> >>>>> >> >> > rsn_ie_len=0 caps=0x11 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): skip - no WPA/RSN IE >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): 2: 94:44:52:62:94:31 >>> >> >>>>> >> >> > ssid='Belkin.3431' >>> >> >>>>> >> >> > wpa_ie_len=0 rsn_ie_len=0 caps=0x1 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): skip - no WPA/RSN IE >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): 3: 00:12:17:65:d9:4e >>> >> >>>>> >> >> > ssid='Seminar >>> >> >>>>> >> >> > ' >>> >> >>>>> >> >> > wpa_ie_len=0 >>> >> >>>>> >> >> > rsn_ie_len=0 caps=0x1 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): skip - no WPA/RSN IE >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Try to find non-WPA AP >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): 0: 00:12:17:65:c9:f6 >>> >> >>>>> >> >> > ssid='Connect01' >>> >> >>>>> >> >> > wpa_ie_len=26 >>> >> >>>>> >> >> > rsn_ie_len=0 caps=0x11 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): skip - privacy mismatch >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): 1: 00:1f:ca:5f:c3:f0 >>> >> >>>>> >> >> > ssid='NEDSCHROEF' >>> >> >>>>> >> >> > wpa_ie_len=0 >>> >> >>>>> >> >> > rsn_ie_len=0 caps=0x11 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): skip - privacy mismatch >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): 2: 94:44:52:62:94:31 >>> >> >>>>> >> >> > ssid='Belkin.3431' >>> >> >>>>> >> >> > wpa_ie_len=0 rsn_ie_len=0 caps=0x1 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): selected non-WPA AP >>> >> >>>>> >> >> > 94:44:52:62:94:31 >>> >> >>>>> >> >> > ssid='Belkin.3431' >>> >> >>>>> >> >> > I/wpa_supplicant( 1349): Trying to associate with >>> >> >>>>> >> >> > 94:44:52:62:94:31 >>> >> >>>>> >> >> > (SSID='Belkin.3431' freq=2412 MHz) >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Cancelling scan request >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): WPA: clearing own WPA/RSN IE >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Automatic auth_alg selection: >>> >> >>>>> >> >> > 0x1 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): WPA: clearing AP WPA IE >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): WPA: clearing AP RSN IE >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): WPA: clearing own WPA/RSN IE >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): No keys have been configured - >>> >> >>>>> >> >> > skip >>> >> >>>>> >> >> > key >>> >> >>>>> >> >> > clearing >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): >>> >> >>>>> >> >> > wpa_driver_wext_set_drop_unencrypted >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): State: SCANNING -> ASSOCIATING >>> >> >>>>> >> >> > I/wpa_supplicant( 1349): CTRL-EVENT-STATE-CHANGE id=-1 >>> >> >>>>> >> >> > state=3 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): wpa_driver_wext_set_operstate: >>> >> >>>>> >> >> > operstate >>> >> >>>>> >> >> > 0->0 >>> >> >>>>> >> >> > (DORMANT) >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): WEXT: Operstate: linkmode=-1, >>> >> >>>>> >> >> > operstate=5 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): wpa_driver_wext_associate >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Setting authentication timeout: >>> >> >>>>> >> >> > 10 >>> >> >>>>> >> >> > sec >>> >> >>>>> >> >> > 0 >>> >> >>>>> >> >> > usec >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): EAPOL: External notification - >>> >> >>>>> >> >> > portControl=ForceAuthorized >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 >>> >> >>>>> >> >> > ifi_flags=0x1003 >>> >> >>>>> >> >> > ([UP]) >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: >>> >> >>>>> >> >> > Interface >>> >> >>>>> >> >> > 'wlan0' >>> >> >>>>> >> >> > added >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Wireless event: cmd=0x8b06 >>> >> >>>>> >> >> > len=8 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 >>> >> >>>>> >> >> > ifi_flags=0x1003 >>> >> >>>>> >> >> > ([UP]) >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: >>> >> >>>>> >> >> > Interface >>> >> >>>>> >> >> > 'wlan0' >>> >> >>>>> >> >> > added >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Wireless event: cmd=0x8b04 >>> >> >>>>> >> >> > len=12 >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK: operstate=0 >>> >> >>>>> >> >> > ifi_flags=0x1003 >>> >> >>>>> >> >> > ([UP]) >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): RTM_NEWLINK, IFLA_IFNAME: >>> >> >>>>> >> >> > Interface >>> >> >>>>> >> >> > 'wlan0' >>> >> >>>>> >> >> > added >>> >> >>>>> >> >> > D/wpa_supplicant( 1349): Wireless event: cmd=0x8b1a >>> >> >>>>> >> >> > len=19 >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > Interface wlan0 is added a lot of times.why?? >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > I also get following error. >>> >> >>>>> >> >> > E/WifiHW ( 1178): Unable to open connection to >>> >> >>>>> >> >> > supplicant >>> >> >>>>> >> >> > on >>> >> >>>>> >> >> > "/data/system/wpa_supplicant/wlan0": No such file or >>> >> >>>>> >> >> > directory >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > With Regards, >>> >> >>>>> >> >> > Manish Shakya >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > On Wed, Oct 13, 2010 at 10:23 AM, hedwin >>> >> >>>>> >> >> > <hedwin.kon...@gmail.com> >>> >> >>>>> >> >> > wrote: >>> >> >>>>> >> >> >> >>> >> >>>>> >> >> >> kernel version is 2.6.32 but it is done in eclair. But >>> >> >>>>> >> >> >> what >>> >> >>>>> >> >> >> I've >>> >> >>>>> >> >> >> seen >>> >> >>>>> >> >> >> sofar is that there is not that much difference >>> >> >>>>> >> >> >> compared to >>> >> >>>>> >> >> >> froyo. >>> >> >>>>> >> >> >> >>> >> >>>>> >> >> >> ok, let me know if you run into issues. >>> >> >>>>> >> >> >> >>> >> >>>>> >> >> >> Cheers, >>> >> >>>>> >> >> >> Hedwin >>> >> >>>>> >> >> >> >>> >> >>>>> >> >> >> >>> >> >>>>> >> >> >> On Wed, Oct 13, 2010 at 4:07 PM, manish shakya >>> >> >>>>> >> >> >> <manishshakya...@gmail.com> wrote: >>> >> >>>>> >> >> >> > Hi Hedwin, >>> >> >>>>> >> >> >> > >>> >> >>>>> >> >> >> > Thanks. Good to know you made wifi working. Which >>> >> >>>>> >> >> >> > version >>> >> >>>>> >> >> >> > of >>> >> >>>>> >> >> >> > kernel >>> >> >>>>> >> >> >> > are >>> >> >>>>> >> >> >> > you using ? I am using kernel 2.6.32 and Android >>> >> >>>>> >> >> >> > 2.2 . >>> >> >>>>> >> >> >> > >>> >> >>>>> >> >> >> > I am going through you posts in rowboat mailing list. >>> >> >>>>> >> >> >> > I >>> >> >>>>> >> >> >> > will >>> >> >>>>> >> >> >> > update >>> >> >>>>> >> >> >> > my >>> >> >>>>> >> >> >> > findings. >>> >> >>>>> >> >> >> > >>> >> >>>>> >> >> >> > >>> >> >>>>> >> >> >> > On Wed, Oct 13, 2010 at 5:49 AM, hedwin >>> >> >>>>> >> >> >> > <hedwin.kon...@gmail.com> >>> >> >>>>> >> >> >> > wrote: >>> >> >>>>> >> >> >> >> >>> >> >>>>> >> >> >> >> Hi >>> >> >>>>> >> >> >> >> >>> >> >>>>> >> >> >> >> Made android wifi work on a IGEPv2 board. This board >>> >> >>>>> >> >> >> >> also >>> >> >>>>> >> >> >> >> uses a >>> >> >>>>> >> >> >> >> Marvell >>> >> >>>>> >> >> >> >> chip. >>> >> >>>>> >> >> >> >> You can find my patches in the android rowboat >>> >> >>>>> >> >> >> >> mailing >>> >> >>>>> >> >> >> >> list. >>> >> >>>>> >> >> >> >> >>> >> >>>>> >> >> >> >> Btw the problem you encounter is due to the fact >>> >> >>>>> >> >> >> >> that >>> >> >>>>> >> >> >> >> the >>> >> >>>>> >> >> >> >> mmc >>> >> >>>>> >> >> >> >> gets >>> >> >>>>> >> >> >> >> disabled while wifi is still operational. >>> >> >>>>> >> >> >> >> >>> >> >>>>> >> >> >> >> Hedwin. >>> >> >>>>> >> >> >> >> >>> >> >>>>> >> >> >> >> On Tue, Oct 12, 2010 at 4:56 PM, Manish >>> >> >>>>> >> >> >> >> <manishshakya...@gmail.com> >>> >> >>>>> >> >> >> >> wrote: >>> >> >>>>> >> >> >> >> > Hi , >>> >> >>>>> >> >> >> >> > >>> >> >>>>> >> >> >> >> > There is no place to generate those bin files. >>> >> >>>>> >> >> >> >> > >>> >> >>>>> >> >> >> >> > On Oct 12, 8:01 am, manish shakya >>> >> >>>>> >> >> >> >> > <manishshakya...@gmail.com> >>> >> >>>>> >> >> >> >> > wrote: >>> >> >>>>> >> >> >> >> >> Hi Hairui >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> Thanks for your response. >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> Let me try to re-compiling the modules and >>> >> >>>>> >> >> >> >> >> generate >>> >> >>>>> >> >> >> >> >> sd8686.bin >>> >> >>>>> >> >> >> >> >> and >>> >> >>>>> >> >> >> >> >> sd8686_helper.bin files. >>> >> >>>>> >> >> >> >> >> BTW, what are those bin files for? >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> ManishOn Mon, Oct 11, 2010 at 11:11 PM, hairui >>> >> >>>>> >> >> >> >> >> <szhai...@gmail.com> >>> >> >>>>> >> >> >> >> >> wrote: >>> >> >>>>> >> >> >> >> >> > Maybe you should re-compile the modules for >>> >> >>>>> >> >> >> >> >> > yourself >>> >> >>>>> >> >> >> >> >> > arch >>> >> >>>>> >> >> >> >> >> > which >>> >> >>>>> >> >> >> >> >> > you >>> >> >>>>> >> >> >> >> >> > chose to use the prebuild one. >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> > On 10月12日, 上午2时50分, manish shakya >>> >> >>>>> >> >> >> >> >> > <manishshakya...@gmail.com> >>> >> >>>>> >> >> >> >> >> > wrote: >>> >> >>>>> >> >> >> >> >> > > Hi everyone, >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> > > I am trying to make Marvell Wifi to work on >>> >> >>>>> >> >> >> >> >> > > overo >>> >> >>>>> >> >> >> >> >> > > board >>> >> >>>>> >> >> >> >> >> > > running >>> >> >>>>> >> >> >> >> >> > > Android. >>> >> >>>>> >> >> >> >> >> > I >>> >> >>>>> >> >> >> >> >> > > am using 2.6.32 linux kernel and Android 2.2. >>> >> >>>>> >> >> >> >> >> > > I >>> >> >>>>> >> >> >> >> >> > > have >>> >> >>>>> >> >> >> >> >> > > put >>> >> >>>>> >> >> >> >> >> > > all >>> >> >>>>> >> >> >> >> >> > > files( >>> >> >>>>> >> >> >> >> >> > > libertas_sdio.ko, >>> >> >>>>> >> >> >> >> >> > > sd8686.bin,sd8686_helper.bin >>> >> >>>>> >> >> >> >> >> > > etc) >>> >> >>>>> >> >> >> >> >> > > in >>> >> >>>>> >> >> >> >> >> > > required >>> >> >>>>> >> >> >> >> >> > > place. >>> >> >>>>> >> >> >> >> >> > > I am using d8686.bin,sd8686_helper.bin from >>> >> >>>>> >> >> >> >> >> > > console >>> >> >>>>> >> >> >> >> >> > > prebuilt >>> >> >>>>> >> >> >> >> >> > > image >>> >> >>>>> >> >> >> >> >> > (2.6.34 >>> >> >>>>> >> >> >> >> >> > > linux ) from gumstix.It seems that libertas >>> >> >>>>> >> >> >> >> >> > > driver >>> >> >>>>> >> >> >> >> >> > > is >>> >> >>>>> >> >> >> >> >> > > loaded >>> >> >>>>> >> >> >> >> >> > > and >>> >> >>>>> >> >> >> >> >> > > driver >>> >> >>>>> >> >> >> >> >> > is >>> >> >>>>> >> >> >> >> >> > > able to find MAC address of the chip. But the >>> >> >>>>> >> >> >> >> >> > > problem is >>> >> >>>>> >> >> >> >> >> > > there >>> >> >>>>> >> >> >> >> >> > > are >>> >> >>>>> >> >> >> >> >> > > a lot >>> >> >>>>> >> >> >> >> >> > of >>> >> >>>>> >> >> >> >> >> > > time out after that. It seems chip is not >>> >> >>>>> >> >> >> >> >> > > getting >>> >> >>>>> >> >> >> >> >> > > command send by the processor. Below is log >>> >> >>>>> >> >> >> >> >> > > that >>> >> >>>>> >> >> >> >> >> > > I >>> >> >>>>> >> >> >> >> >> > > get: >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> > > libertas_sdio: Libertas SDIO driver >>> >> >>>>> >> >> >> >> >> > > libertas_sdio: Copyright Pierre Ossman >>> >> >>>>> >> >> >> >> >> > > libertas_sdio mmc1:0001:1: firmware: >>> >> >>>>> >> >> >> >> >> > > requesting >>> >> >>>>> >> >> >> >> >> > > sd8686_helper.bin >>> >> >>>>> >> >> >> >> >> > > init: untracked pid 1221 exited >>> >> >>>>> >> >> >> >> >> > > libertas_sdio mmc1:0001:1: firmware: >>> >> >>>>> >> >> >> >> >> > > requesting >>> >> >>>>> >> >> >> >> >> > > sd8686.bin >>> >> >>>>> >> >> >> >> >> > > init: untracked pid 1224 exited >>> >> >>>>> >> >> >> >> >> > > libertas: 00:19:88:37:0e:dd, fw 9.70.7p0, cap >>> >> >>>>> >> >> >> >> >> > > 0x00000303 >>> >> >>>>> >> >> >> >> >> > > libertas: wlan0: Marvell WLAN 802.11 adapter >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0006 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#1) >>> >> >>>>> >> >> >> >> >> > > libertas: Received result 0 to command 6 >>> >> >>>>> >> >> >> >> >> > > after 1 >>> >> >>>>> >> >> >> >> >> > > retries >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0013 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0013 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#1) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0013 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0013 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#2) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0013 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0013 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#3) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0013 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting >>> >> >>>>> >> >> >> >> >> > > command >>> >> >>>>> >> >> >> >> >> > > 0x0013 >>> >> >>>>> >> >> >> >> >> > > libertas: PREP_CMD: command 0x0013 failed: >>> >> >>>>> >> >> >> >> >> > > -110 >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#1) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#2) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#3) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting >>> >> >>>>> >> >> >> >> >> > > command >>> >> >>>>> >> >> >> >> >> > > 0x0010 >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#1) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#2) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0010 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#3) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0010 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting >>> >> >>>>> >> >> >> >> >> > > command >>> >> >>>>> >> >> >> >> >> > > 0x0010 >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0006 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#1) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0006 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#2) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0006 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#3) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0006 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting >>> >> >>>>> >> >> >> >> >> > > command >>> >> >>>>> >> >> >> >> >> > > 0x0006 >>> >> >>>>> >> >> >> >> >> > > libertas: PREP_CMD: command 0x0006 failed: >>> >> >>>>> >> >> >> >> >> > > -110 >>> >> >>>>> >> >> >> >> >> > > libertas: SCAN_CMD failed >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0028 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0028 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#1) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0028 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0028 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#2) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0028 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x0028 due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#3) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x0028 timed out >>> >> >>>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting >>> >> >>>>> >> >> >> >> >> > > command >>> >> >>>>> >> >> >> >> >> > > 0x0028 >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x002f timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x002f due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#1) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x002f timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x002f due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#2) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x002f timed out >>> >> >>>>> >> >> >> >> >> > > libertas: requeueing command 0x002f due to >>> >> >>>>> >> >> >> >> >> > > timeout >>> >> >>>>> >> >> >> >> >> > > (#3) >>> >> >>>>> >> >> >> >> >> > > libertas: command 0x002f timed out >>> >> >>>>> >> >> >> >> >> > > libertas: Excessive timeouts submitting >>> >> >>>>> >> >> >> >> >> > > command >>> >> >>>>> >> >> >> >> >> > > 0x002f >>> >> >>>>> >> >> >> >> >> > > libertas: PREP_CMD: command 0x002f failed: >>> >> >>>>> >> >> >> >> >> > > -110 >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> > > Any ideas would be really appreciated. >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> > > Manish Shakya >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> > -- >>> >> >>>>> >> >> >> >> >> > unsubscribe: >>> >> >>>>> >> >> >> >> >> > >>> >> >>>>> >> >> >> >> >> > >>> >> >>>>> >> >> >> >> >> > >>> >> >>>>> >> >> >> >> >> > >>> >> >>>>> >> >> >> >> >> > >>> >> >>>>> >> >> >> >> >> > >>> >> >>>>> >> >> >> >> >> > android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> >>> >> >>>>> >> >> >> >> >> > >>> >> >>>>> >> >> >> >> >> > >>> >> >>>>> >> >> >> >> >> > website:http://groups.google.com/group/android-porting >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> >> >>> >> >>>>> >> >> >> >> > >>> >> >>>>> >> >> >> >> > -- >>> >> >>>>> >> >> >> >> > unsubscribe: >>> >> >>>>> >> >> >> >> > android-porting+unsubscr...@googlegroups.com >>> >> >>>>> >> >> >> >> > website: >>> >> >>>>> >> >> >> >> > http://groups.google.com/group/android-porting >>> >> >>>>> >> >> >> >> > >>> >> >>>>> >> >> >> > >>> >> >>>>> >> >> >> > >>> >> >>>>> >> >> >> > >>> >> >>>>> >> >> >> > -- >>> >> >>>>> >> >> >> > Manish Shakya >>> >> >>>>> >> >> >> > http://www.manishshakya.com.np >>> >> >>>>> >> >> >> > http://secs.oakland.edu/~ganesan/iMX/ >>> >> >>>>> >> >> >> > >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > >>> >> >>>>> >> >> > -- >>> >> >>>>> >> >> > Manish Shakya >>> >> >>>>> >> >> > http://www.manishshakya.com.np >>> >> >>>>> >> >> > http://secs.oakland.edu/~ganesan/iMX/ >>> >> >>>>> >> >> > >>> >> >>>>> >> > >>> >> >>>>> >> > >>> >> >>>>> >> > >>> >> >>>>> >> > -- >>> >> >>>>> >> > Manish Shakya >>> >> >>>>> >> > http://www.manishshakya.com.np >>> >> >>>>> >> > http://secs.oakland.edu/~ganesan/iMX/ >>> >> >>>>> >> > >>> >> >>>>> >> >>> >> >>>>> >> -- >>> >> >>>>> >> unsubscribe: android-porting+unsubscr...@googlegroups.com >>> >> >>>>> >> website: http://groups.google.com/group/android-porting >>> >> >>>>> > >>> >> >>>>> > >>> >> >>>>> > >>> >> >>>>> > -- >>> >> >>>>> > Manish Shakya >>> >> >>>>> > http://www.manishshakya.com.np >>> >> >>>>> > http://secs.oakland.edu/~ganesan/iMX/ >>> >> >>>>> > >>> >> >>>> >>> >> >>>> >>> >> >>>> >>> >> >>>> -- >>> >> >>>> Manish Shakya >>> >> >>>> http://www.manishshakya.com.np >>> >> >>>> http://secs.oakland.edu/~ganesan/iMX/ >>> >> >>> >>> >> >>> >>> >> >>> >>> >> >>> -- >>> >> >>> Manish Shakya >>> >> >>> http://www.manishshakya.com.np >>> >> >>> http://secs.oakland.edu/~ganesan/iMX/ >>> >> >> >>> >> >> >>> >> >> >>> >> >> -- >>> >> >> Manish Shakya >>> >> >> http://www.manishshakya.com.np >>> >> >> http://secs.oakland.edu/~ganesan/iMX/ >>> >> >> >>> >> >> -- >>> >> >> unsubscribe: android-porting+unsubscr...@googlegroups.com >>> >> >> website: http://groups.google.com/group/android-porting >>> >> > >>> >> > >>> > >>> > >> >> >> >> -- >> Manish Shakya >> http://www.manishshakya.com.np >> http://secs.oakland.edu/~ganesan/iMX/ > > > > -- > Manish Shakya > http://www.manishshakya.com.np > http://secs.oakland.edu/~ganesan/iMX/ >
-- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
