Hi,
I'm porting android-2.3.3_r1a to the Gumstix Overo Fire COM
module with Chestnut43 expansion board.
I'm using android-2.3.3_r1a and android-rowboat-eclair-2.6.32 kernel
branch.
I get the android logo boot animation, but I am unable to get a
console to be able to type the logcat command,
to debug the rest of the boot process.
In my device's init.rc file, I have the following entries
## Daemon processes to be run by init.
##
service ueventd /sbin/ueventd
critical
service console /system/bin/sh
console
The system just hangs like this for a very long time and doesn't boot
into the home screen.
I noticed this patch - disable console in user builds, which leads me
to wonder if logcat output support is suppressed or
removed for some reason in android-2.3.3?
http://android.git.kernel.org/?p=platform/system/core.git;a=blobdiff;f=rootdir/init.rc;h=8227273af853be8a63f068f46a4b63ac15a8e7d1;hp=271727361d67dac1505462ba542d71a6113f100b;hb=b4d65399fde02280b718e3b5b5cb1464a885c4b0;hpb=146481b9468ff60214e41c93896259a7201df7cb
Without a logcat console output, it is not possible for me to diagnose
what's happening
so if someone could tell me why the console doesn't work any more in
android-2.3.3, it would be great.
I've already got android-2.2.2_r1 running on the same hardware, with
no problems,
its just android-2.3.3_r1a for which the console isn't working.
Elvis Dowson
Texas Instruments X-Loader 1.5.0 (Apr 23 2011 - 19:38:37)
OMAP3530-GP ES2.1
Board revision: 0
Reading boot sector
Loading u-boot.bin from mmc
U-Boot 2010.03 (Apr 24 2011 - 01:13:02)
OMAP3530-GP ES2.1, CPU-OPP2 L3-165MHz
Gumstix Overo board + LPDDR/NAND
I2C: ready
DRAM: 256 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Die ID #5d3400020000000004031c131901900b
Net: smc911x-0
Hit any key to stop autoboot: 0
mmc1 is available
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
2634844 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-2.6.32
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2634780 Bytes = 2.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing
Linux.....................................................................................................................................................................
done, booting the kernel.
Linux version 2.6.32 (elvis@hercules) (gcc version 4.3.3 (GCC) ) #6
Mon May 2 22:26:58 GST 2011
CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Gumstix Overo
Memory policy: ECC disabled, Data cache writeback
OMAP3430/3530 ES2.1 (l2cache iva sgx neon isp )
SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
Reserving 12582912 bytes SDRAM for VRAM
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
65024
Kernel command line: console=ttyS2,115200n8 androidboot.console=ttyS2
root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait vram=12M
omapfb.vram=0:4M omapfb.mode=480x272MR-16@60 omapdss.def_disp=lcd43
omapfb.debug=y omapdss.debug=y init=/init
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 128MB 128MB = 256MB total
Memory: 241664KB available (4612K code, 800K data, 168K init, 0K
highmem)
Hierarchical RCU implementation.
NR_IRQS:402
Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
Reprogramming SDRC clock to 332000000 Hz
GPMC revision 5.0
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Total of 96 interrupts on 1 active controller
OMAP GPIO hardware version 2.5
OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
Found NAND on CS0
Registering NAND on CS0
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
twl4030: PIH (irq 7) chaining IRQs 368..375
twl4030: power (irq 373) chaining IRQs 376..383
twl4030: gpio (irq 368) chaining IRQs 384..401
regulator: VUSB1V5: 1500 mV normal standby
regulator: VUSB1V8: 1800 mV normal standby
regulator: VUSB3V1: 3100 mV normal standby
twl4030_usb twl4030_usb: Initialized TWL4030 USB module
regulator: VMMC1: 1850 <--> 3150 mV normal standby
regulator: VDAC: 1800 mV normal standby
regulator: VPLL2: 1800 mV normal standby
i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: 00
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource 32k_counter
musb_hdrc: version 6.0, musb-dma, host, debug=0
musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: MUSB HDRC host driver
usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
usb usb1: SerialNumber: musb_hdrc
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
ashmem: initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
yaffs May 2 2011 22:26:54 Installing.
msgmni has been set to 472
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
OMAP DSS rev 2.0
OMAP DISPC rev 3.0
OMAP VENC rev 2
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
console [ttyS2] enabled
brd: module loaded
loop: module loaded
omap2-nand driver initializing
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB
1,8V 16-bit)
cmdlinepart partition parsing not available
Creating 5 MTD partitions on "omap2-nand":
0x000000000000-0x000000080000 : "xloader"
0x000000080000-0x000000240000 : "uboot"
0x000000240000-0x000000280000 : "uboot environment"
0x000000280000-0x000000680000 : "linux"
0x000000680000-0x000010000000 : "rootfs"
smsc911x: Driver version 2008-10-21.
smsc911x-mdio: probed
eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=0:01,
irq=-1)
net eth0: MAC Address: 00:15:c9:28:ca:1d
smsc911x: Driver version 2008-10-21.
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OMAP-EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
usb usb2: SerialNumber: ehci-omap.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
android init
f_adb init
android_register_function adb
f_mass_storage init
android_register_function usb_mass_storage
ads7846 spi1.0: touchscreen, irq 274
input: ADS7846 Touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/
input/input0
input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/
twl4030_pwrbutton/input/input1
using rtc device, twl_rtc, for alarms
twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
twl_rtc twl_rtc: Power up reset detected.
i2c /dev entries driver
OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
Advanced Linux Sound Architecture Driver Version 1.0.21.
No device for DAI omap-mcbsp-dai-0
No device for DAI omap-mcbsp-dai-1
No device for DAI omap-mcbsp-dai-2
No device for DAI omap-mcbsp-dai-3
No device for DAI omap-mcbsp-dai-4
overo SoC init
asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
ALSA device list:
#0: overo (twl4030)
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
Power Management for TI OMAP3.
SmartReflex driver initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev
1
omapfb omapfb: cannot parse default modes
Console: switching to colour frame buffer device 60x34
omapdss DPI: Could not find exact pixel clock. Requested 9200 kHz, got
9094 kHz
mmc0: host does not support reading read-only switch. assuming write-
enable.
mmc0: new SDHC card at address e624
regulator_init_complete: incomplete constraints, leaving VDVI on
mmcblk0: mmc0:e624 SU04G 3.69 GiB
mmcblk0:
regulator_init_complete: incomplete constraints, leaving VDAC on
twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:15 UTC
(946684815)
p1 p2
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 179:2.
Freeing init memory: 168K
mmc1: new SDIO card at address 0001
libertas_sdio mmc1:0001:1: firmware: requesting sd8686_helper.bin
init: Timed out waiting for /dev/.coldboot_done
init: command 'loglevel' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'symlink' r=0
init: command 'symlink' r=0
init: command 'symlink' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mount' r=-1
init: command 'mkdir' r=0
init: command 'symlink' r=0
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mount' r=0
init: command 'mkdir' r=0
init: command 'mount' r=0
init: command 'write' r=0
init: command 'write' r=-2
init: command 'write' r=0
init: command 'write' r=-2
init: command 'write' r=-2
init: command 'write' r=0
init: command 'write' r=0
init: command 'mkdir' r=0
init: command 'mount' r=-1
init: command 'chown' r=0
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'write' r=0
init: command 'mkdir' r=0
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'write' r=0
init: command 'mkdir' r=0
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'write' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chmod' r=-2
init: command 'chmod' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'mkdir' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'copy' r=-1
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'copy' r=-1
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'write' r=-2
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chmod' r=-2
init: command 'chmod' r=-2
init: command 'chmod' r=-2
init: command 'chmod' r=-2
init: command 'chmod' r=-2
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=-17
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chown' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'chmod' r=0
init: command 'chmod' r=-2
init: command 'chown' r=0
init: command 'chown' r=-2
init: command 'mkdir' r=0
init: command 'chmod' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'mkdir' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chmod' r=-2
init: command 'chmod' r=-2
init: command 'chmod' r=-2
init: command 'chmod' r=-2
init: command 'chmod' r=-2
init: command 'chmod' r=-2
init: processing action 0x2a128 (property_service_init)
init: Created socket '/dev/socket/property_service' with mode '666',
user '0', group '0'
init: command 'property_service_init' r=0
init: processing action 0x2a170 (signal_init)
init: command 'signal_init' r=0
init: processing action 0x2a1b8 (check_startup)
init: command 'check_startup' r=0
init: processing action 0x28718 (boot)
init: command 'ifup' r=0
init: command 'hostname' r=0
init: command 'domainname' r=0
init: command 'setrlimit' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: starting 'ueventd'
init: service 'console' requires console
init: starting 'servicemanager'
init: starting 'vold'
init: Created socket '/dev/socket/vold' with mode '660', user '0',
group '1009'
init: starting 'netd'
init: Created socket '/dev/socket/netd' with mode '660', user '0',
group '1000'
init: starting 'debuggerd'
init: starting 'zygote'
init: starting 'media'
init: starting 'installd'
init: starting 'keystore'
init: command 'class_start' r=0
init: Created socket '/dev/socket/zygote' with mode '666', user '0',
group '0'
init: processing action 0x2a200 (queue_propety_triggers)
init: command 'queue_propety_triggers' r=0
init: processing action 0x29300
(property:persist.service.adb.enable=1)
init: starting 'adbd'
init: command 'start' r=0
init: Created socket '/dev/socket/installd' with mode '600', user
'1000', group '1000'
init: Created socket '/dev/socket/keystore' with mode '666', user '0',
group '0'
init: waitpid returned pid 584, status = 0000000b
init: process 'servicemanager', pid 584 exited
init: process 'servicemanager' killing any children in process group
init: service 'zygote' is being killed
init: starting 'zygote'
init: service 'media' is being killed
init: starting 'media'
init: Created socket '/dev/socket/zygote' with mode '666', user '0',
group '0'
init: waitpid returned pid 618, status = 0000000f
init: untracked pid 618 exited
init: waitpid returned pid 620, status = 0000000f
init: untracked pid 620 exited
libertas_sdio mmc1:0001:1: firmware: requesting sd8686.bin
init: waitpid returned pid 638, status = 00000100
init: process 'keystore', pid 638 exited
init: process 'keystore' killing any children in process group
binder: 685:685 refcount change on invalid ref 0
binder: 685:685 refcount change on invalid ref 0
binder: 685:685 transaction failed 29189, size 124-4
libertas: 00:19:88:10:f9:9c, fw 9.70.3p24, cap 0x00000303
libertas: wlan0: Marvell WLAN 802.11 adapter
init: starting 'servicemanager'
init: starting 'keystore'
init: Created socket '/dev/socket/keystore' with mode '666', user '0',
group '0'
warning: `zygote' uses 32-bit capabilities (legacy support in use)
init: starting 'bootanim'
(The system doesn't proceed any further and on the LCD display, the
android
logo animation keeps on playing forever, without booting into the home
screen.)
--
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
