Dear all, As you know that when doing CTS, there is a configuration about the maxTestCount, this params is for CTS host to reboot the device after maxTestCount reached, see below details from android-cts/repository/host_config.xml, the maxTestCount is set as 200, that means in CTS environment, it will send reboot request to device(with adb command over USB for real devices) every 200 test cases be executed(fix me if I was wrong)
<!-- Number of tests executed between reboots. A value <= 0 disables reboots. --> <IntValue name="maxTestCount" value="200" /> So when you execute "start --plan CTS" in CTS console environment, all of more than 2700 cases will start to run on the tested devices which connected to the host via USB(adb). The phenomena I meet is: After sometimes reboot(it is randomly), CTS console UI print below message, then the CTS could not continue to run test case anymore. CTS_INFO >>> Max ADB operations reached. Restarting ADB... CTS_INFO >>> Restarting device ... Device(0123456789ABCDEF) disconnected Test stopped. But I still can use "adb devices" or "adb shell" in bash to connect to the devices. and the other case is : If I unplug out the USB cable and then re-plugin the USB cable, the CTS can connect the device again and continue run the test suite. Does anybody meet the same issues on real devices? and any advices on this will be appreciated. Thanks & Best Regards, Frank -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting