Do you use froyo or gingerbread?
On Fri, Jul 15, 2011 at 3:57 PM, manish shakya <msha...@oakland.edu> wrote: > Yes, Both console and android.console is pointing to correct serial device > i.e. ttyS2. > > My uboot args is > > console=ttyS2,115200n8 androidboot.console=ttyS2 root=/dev/mmcblk0p2 rw > rootfstype=ext3 rootwait init=/init vram=12M > omapfb.mode=dvi:480x272MR-16@60omapdss.def_disp=lcd43 > > Isn't this correct? > > > On Fri, Jul 15, 2011 at 5:44 AM, hedwin <hedwin.kon...@gmail.com> wrote: > > > > Check if console and android.console point to the correct serial device. > > Both a kernel parameters sent by u-boot. > > > > Cheers, > > > > Hedwin > > > > On Thu, Jul 14, 2011 at 9:45 PM, Manish Shakya < > manishshakya...@gmail.com> wrote: > >> > >> Hi , > >> > >> I am wondering what are the changes to be made if I have to make to port > rowboat to gumstix overo module. > >> > >> I did following things but it didn't worked. :-( > >> I made change in config file , board-overo.c and also added LCD driver. > Compilation went fine with out errors. > >> But when I tried to run the image. It show following log and gets stuck. > >> > >> 2731240 bytes read > >> ## Booting kernel from Legacy Image at 82000000 ... > >> Image Name: Linux-2.6.37-g06ebbba > >> Image Type: ARM Linux Kernel Image (uncompressed) > >> Data Size: 2731176 Bytes = 2.6 MiB > >> Load Address: 80008000 > >> Entry Point: 80008000 > >> Verifying Checksum ... OK > >> Loading Kernel Image ... OK > >> OK > >> > >> Starting kernel ... > >> > >> Uncompressing Linux... done, booting the kernel. > >> > >> > >> -- > >> Manish Shakya > >> http://www.manishshakya.com.np > >> > >> -- > >> unsubscribe: android-porting+unsubscr...@googlegroups.com > >> website: http://groups.google.com/group/android-porting > > > > > > -- > > Manish Shakya > http://www.manishshakya.com.np > http://secs.oakland.edu/~ganesan/iMX/ > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting