Hi Devindrappa Handraki, i had been trying it........... for me both are not working at time... here i am using mux concept also.. !!!!!!!!
i don't know what happen in your case....but with rild interface i have been connection the net .. see once again... 1) i written code for manually enter at commands!!!!! in this #AT+CGREG=1 #AT^SGAUTH=0 // in your case no need of this command. #At+cgatt=1 # AT+Cgdcont=1,IP,BSNLNET 2) /system/bin/pppd nodetach debug /dev/ttyACM0 115200 nocrtscts local 0.0.0.0:10.0.0.1 noipdefault ipcp-accept-local connect '/system/bin/chat -v -s -f /system/etc/ppp/gprs_chat' defaultroute usepeerdns modem updetach noauth 3) gprs_chat.sh file contains ABORT 'BUSY' ABORT 'NO CARRIER' ABORT 'VOICE' ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'DELAYED' REPORT CONNECT TIMEOUT 6 '' 'AT+CGDCONT=1,"IP","airtelgprs.com"' 'OK' 'ATD*99***1#' TIMEOUT 30 CONNECT '' On Tue, Jan 17, 2012 at 2:23 PM, Devindrappa Handraki < devindrapp...@gmail.com> wrote: > Hi venkat and Chaitanya, > > 1. I am not able to access Internet, i am getting the below mentioned > error > E/pppd ( 1799): Connect script failed > I/pppd ( 1802): ######### pppd exited with 8 > > 2. Do we need to configure mux driver for internet access and telephone > services. If so please give me some hints. > > Thanks and Regards, > Devindrappa > > > > > On Tue, Jan 17, 2012 at 9:12 AM, venkat k raju <kvraju....@gmail.com>wrote: > >> >> Hi Chaitanya & Devindrappa, >> >> thanks for your suggestions. >> >> finally i am able to establish GPRS and GSM individually. >> if i tried both at time then my usb (modem) was disconnecting. >> >> i have been trying it... !!!!!!!!! >> >> >> On Mon, Jan 16, 2012 at 5:23 PM, Sai Chaitanya Chitneedi < >> chaitanya.nom...@gmail.com> wrote: >> >>> Hi venkat, >>> I'm not aware of the mux driver and config binary you are using. >>> Assuming it works well, it seems like a permission problem or a locked >>> socket problem. do a "lsof" on /dev/socket/rild (socket used by android to >>> communicate with ril daemon) for any exsting locks and check its >>> permissions. Try with the physical port first,after killing the rild. Then >>> try with your virtual port. >>> >>> Also if it suits your purpose use a soft link instead of virtual ports. >>> >>> On Mon, Jan 16, 2012 at 11:25 AM, venkat k raju <kvraju....@gmail.com>wrote: >>> >>>> >>>> Hi chaitanya, >>>> can you explain me how to establish gsm on gingerbread. >>>> >>>> i am following there steps to manually establish GSM/GPRS .... please >>>> correct me. >>>> >>>> >>>> #chmod 0666 /dev/ttyACM0 /********* my physical serial port*******/ >>>> # chown radio.radio /dev/ttyACM0 >>>> # insmod ./linmux.ko /*************** my mux driver to create >>>> virtual port *********/ >>>> # chmod 0666 /dev/ttyMux1 >>>> # chmod 0666 /dev/ttyMux2 >>>> # chmod 0666 /dev/ttyMux0 >>>> # chown radio.radio /dev/ttyMux0 >>>> # chown radio.radio /dev/ttyMux1 >>>> # chown radio.radio /dev/ttyMux2 >>>> >>>> #mknod /dev/muxcfg c 239 0 /****** i am creating the interface >>>> driver***********/ >>>> >>>> #/system/bin/linmuxcfg -p=/dev/ttyACM0 /******** configuring the >>>> physical port to virtual port **********/ >>>> >>>> then i am trying to kill rild daemon then i am trying execute the >>>> bellow command for GSM as well as gprs with new virtual serial port. >>>> >>>> #/system/bin/rild -l /system/lib/libreference-ril.so -- -d /dev/ttyMux0 >>>> >>>> but here i got the error like this >>>> >>>> >>>> I/RIL ( 360): Opening tty device /dev/ttyMux0 >>>> E/RILC ( 360): Failed to get socket 'rild' >>>> >>>> >>>> please suggest me !!!!!!! >>>> >>>> thanks&Regards >>>> k.v.raju >>>> >>> >>> >> >> >> -- >> thanks&Regards >> k.v.raju >> > > -- thanks&Regards k.v.raju -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting