what is the reset reason?? Is it a normal warm reset, in that case you need to check your initrc. If its watchdog reset you will get to know by seeing reset reason.
On Thursday, 10 April 2014 17:34:37 UTC+5:30, Richard Phillips wrote: > > Hello all, > > I'm trying to get Android booting on custom hardware (that appears to be > based heavily on BeagleBoard/xM design). I'm having problems with the > device resetting, as shown in the trace below. I'm guessing it's not a > kernel problem because I'd expect to see a "kernel panic", rather than a > spontaneous reset? Comparing this trace to a known good boot (on > BeagleBoard-xM), there wasn't much left to do anyway trace-wise... > > Anybody have any ideas? > > Regards, > Richard. > > > <SNIP> > > Waiting 1sec before mounting root device... > mmc0: host reports active read-only switch, but ignoring. > mmc0: new high speed SDHC card at address 0007 > mmcblk0: mmc0:0007 SD16G 14.6 GiB > mmcblk0: p1 p2 p3 > EXT4-fs (mmcblk0p2): recovery complete > EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: > (null) > VFS: Mounted root (ext4 filesystem) on device 179:2. > Freeing init memory: 216K > init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj > instead. > init: cannot open '/initlogo.rle' > init: cannot find '/system/etc/install-recovery.sh', disabling > 'flash_recovery' > enabling adb > adb_open > root@android:/ # init: untracked pid 1040 exited > warning: `zygote' uses 32-bit capabilities (legacy support in use) > request_suspend_state: wakeup (3->0) at 21261627199 (2000-01-01 > 00:00:17.357543946 UTC) > > <<<RESET OCCURS HERE>>> > > Texas Instruments X-Loader 1.51 (Mar 31 2014 - 15:45:22) > Beagle unknown 0x04 > Starting X-loader on MMC > Reading boot sector > > 213264 Bytes Read from MMC > Starting OS Bootloader from MMC... > Starting OS Bootloader... > > > U-Boot 2010.06-svn102 (Mar 31 2014 - 15:48:32) > > <SNIP> > -- -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting --- You received this message because you are subscribed to the Google Groups "android-porting" group. To unsubscribe from this group and stop receiving emails from it, send an email to android-porting+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
