Thanks for the ideas everyone - the problem seems to have gone away, so perhaps I was doing something wrong somewhere, but if the problem ever returns...
Regards, Richard. On Thursday, 10 April 2014 13:04:37 UTC+1, Richard Phillips wrote: > > Hello all, > > I'm trying to get Android booting on custom hardware (that appears to be > based heavily on BeagleBoard/xM design). I'm having problems with the > device resetting, as shown in the trace below. I'm guessing it's not a > kernel problem because I'd expect to see a "kernel panic", rather than a > spontaneous reset? Comparing this trace to a known good boot (on > BeagleBoard-xM), there wasn't much left to do anyway trace-wise... > > Anybody have any ideas? > > Regards, > Richard. > > > <SNIP> > > Waiting 1sec before mounting root device... > mmc0: host reports active read-only switch, but ignoring. > mmc0: new high speed SDHC card at address 0007 > mmcblk0: mmc0:0007 SD16G 14.6 GiB > mmcblk0: p1 p2 p3 > EXT4-fs (mmcblk0p2): recovery complete > EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: > (null) > VFS: Mounted root (ext4 filesystem) on device 179:2. > Freeing init memory: 216K > init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj > instead. > init: cannot open '/initlogo.rle' > init: cannot find '/system/etc/install-recovery.sh', disabling > 'flash_recovery' > enabling adb > adb_open > root@android:/ # init: untracked pid 1040 exited > warning: `zygote' uses 32-bit capabilities (legacy support in use) > request_suspend_state: wakeup (3->0) at 21261627199 (2000-01-01 > 00:00:17.357543946 UTC) > > <<<RESET OCCURS HERE>>> > > Texas Instruments X-Loader 1.51 (Mar 31 2014 - 15:45:22) > Beagle unknown 0x04 > Starting X-loader on MMC > Reading boot sector > > 213264 Bytes Read from MMC > Starting OS Bootloader from MMC... > Starting OS Bootloader... > > > U-Boot 2010.06-svn102 (Mar 31 2014 - 15:48:32) > > <SNIP> > -- -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting --- You received this message because you are subscribed to the Google Groups "android-porting" group. To unsubscribe from this group and stop receiving emails from it, send an email to android-porting+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
