>
> I finally have something close to working. I managed to build Android 7.0
> with an RTL8188CUS module and this gets detected and I can see my wifi
> network in the search.
>
The issue that remains is the SEPOLICY and I get an audit denied as follows:
[ 128.993333] init: Starting service 'p2p_supplicant'...
[ 151.403333] type=1400 audit(1579495192.328:5): avc: denied { read } for
pid=1375 comm="wpa_supplicant" name="rfkill" dev="tmpfs" ino=9258
scontext=u:r:wpa:s0 tcontext=u:object_r:device:s0 tclass=chr_file
permissive=0
I ran audti2allow which generated the following, which I placed in wpa.te
but the build complains with the error below.
allow wpa device:chr_file {read open };
The following error appears in the build output.
FAILED: /bin/bash -c "(out/host/linux-x86/bin/checkpolicy -M -c 30 -o
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates/sepolicy.tmp
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates/policy.conf ) &&
(out/host/linux-x86/bin/checkpolicy -M -c 30 -o
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates//sepolicy.dontaudit
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates/policy.conf.dontaudit
) && (out/host/linux-x86/bin/sepolicy-analyze
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates/sepolicy.tmp
permissive >
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates/sepolicy.permissivedomains
) && (if [ \"userdebug\" = \"user\" -a -s
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates/sepolicy.permissivedomains
]; then echo \"==========\" 1>&2; echo \"ERROR: permissive domains not
allowed in user builds\" 1>&2; echo \"List of invalid domains:\" 1>&2; cat
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates/sepolicy.permissivedomains
1>&2; exit 1; fi ) && (mv
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates/sepolicy.tmp
out/target/product/nanopi3/obj/ETC/sepolicy_intermediates/sepolicy )"
libsepol.report_failure: neverallow on line 263 of
system/sepolicy/domain.te (or line 9058 of policy.conf) violated by allow
wpa device:chr_file { read open };
Any idea why this doesn't work?
--
--
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
---
You received this message because you are subscribed to the Google Groups
"android-porting" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to android-porting+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/android-porting/a5f608d1-8bdd-4a85-a469-ccddd0c0460e%40googlegroups.com.
