Hey guys, I followed the instructions on http://www.angstrom-distribution.org/building-angstrom and have successfully managed to build Angstrom images for the h5000. My results are located in /usr/local/share/oe/org.openembedded.stable/tmp/deploy/glibc/images/h5000 and appear as follows:
Angstrom-base-image-glibc-ipk-2007.12-r18-h5000.rootfs.jffs2 Angstrom-base-image-glibc-ipk-2007.12-r18-h5000.rootfs.tar.gz Angstrom-base-image-glibc-ipk-2007.12-r18-h5000-testlab Angstrom-console-image-glibc-ipk-2007.12-r18-h5000.rootfs.jffs2 Angstrom-console-image-glibc-ipk-2007.12-r18-h5000.rootfs.tar.gz Angstrom-console-image-glibc-ipk-2007.12-r18-h5000-testlab Angstrom-x11-image-glibc-ipk-2007.12-r18-h5000.rootfs.jffs2 Angstrom-x11-image-glibc-ipk-2007.12-r18-h5000.rootfs.tar.gz Angstrom-x11-image-glibc-ipk-2007.12-r18-h5000-testlab base-image-h5000.jffs2 base-image-h5000.tar.gz console-image-h5000.jffs2 console-image-h5000.tar.gz reflash.ctl startup.txt x11-image-h5000.jffs2 x11-image-h5000.tar.gz zImage-2.6.21-hh20-r16-h5000.bin What I am attempting on doing is running Angstrom (for h5000) on Qemu for Linux. I was hoping it would be as simple as running the following command: qemu-system-arm -cpu pxa255 -pflash console-image-h5000.tar.gz -kernel zImage-2.6.21-hh20-r16-h5000.bin but it doesn't seem to produce anything but a Qemu screen with no output. Has anyone had any success with such a configuration? Oddly enough, when I do qemu-system-arm -M ?, it does not output any HP machines (specifically the h5500 or anything in the h5000 series) but only Sharp Zaurus machines (akitz, spitz, connex, etc). I guess what it boils down to is, has anyone created Angstrom images targeted for the H5000 running on Qemu for Linux? Thanks for any replies! _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
