|
HI Richard,
So here is the content of my
Autoexec.bat:
SET
SOUND=C:\ARCHIV~1\CREATIVE\CTSND
SET MIDI=SYNTH:1 MAP:E MODE:0 SET BLASTER=A220 I5 D1 H5 P330 E620 T6 @ECHO OFF PROMPT $p$g PATH C:\WINDOWS;C:\WINDOWS\COMMAND;C:\DOS;C:\CN SET TEMP=C:\DOS rem - By Windows Setup - C:\WINDOWS\COMMAND\MSCDEX.EXE /D:IDECD000 mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi) LH /L:3,30464 mode con codepage select=850 keyb us,,C:\WINDOWS\COMMAND\keyboard.sys REM C:\DOS\MSCDEX.EXE /D:IDECD000 REM C:\DOS\MSCDEX.EXE /D:IDECD000 REM LH /L:3,38320 C:\DOS\MSCDEX.EXE /D:IDECD000 LH /L:3,38320 C:\DOS\MSCDEX.EXE /D:IDECD000 UNDELETE /LOAD SET CLASSPATH=C:\java\classes\vrml\;%CLASSPATH% And here is my
Config.sys:
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS X=CA00-CAFF X=CC00-DFFF BUFFERS=30,0 FILES=30 DOS=UMB LASTDRIVE=N FCBS=4,0 REM LASTDRIVE=N REM LASTDRIVE=` DEVICEHIGH /L:3,16976 =C:\WINDOWS\SETVER.EXE DOS=HIGH [common]
REM DEVICEHIGH /L:3,28784 =C:\CDROM\ACERCD.SYS /D:IDECD000 DEVICEHIGH /L:3,17248 =C:\WINDOWS\COMMAND\DISPLAY.SYS CON=(EGA,,1) Country=034,850,C:\WINDOWS\COMMAND\country.sys [common]
REM DEVICE=C:\CDROM\ACERCD.SYS /D:IDECD000 REM LASTDRIVE=N [common]
REM DEVICE=C:\CDROM\ACERCD.SYS /D:IDECD000 REM LASTDRIVE=N [common]
REM DEVICE=C:\CDROM\ACERCD.SYS /D:IDECD000 [common]
DEVICE=C:\CDROM\ACERCD.SYS /D:IDECD000 And the information shown doing the mem command is: Type of
memory
Total
Used
Free
------------------------
--------- -----------
------------
Conventional 640K 164K
476K
Superior 0K
0K 0K
Reserved 384K 384K
0K
Extended
(XMS)
31.744K
384K 31.360K
------------------------
------------- ----------
--------------
Total
Memory
32.768K
932K
31.836K
Total
Under
640K 164K
476K
Higher size of executable
program: 476K (487.712
bytes)
Higher block of superior
free
memory:
0K (0 bytes)
MS-DOS is a resident
program in the high memory area.
So I hope you can help me to make
Arachne useful for me.
Thanks!
----- Original Message -----
From: "Richard Menedetter" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, June 24, 2001 7:50 AM
Subject: Help! > > 24 Jun 2001, "Sergio Vainroj" <[EMAIL PROTECTED]> wrote: > > SV> After installing Arachne and also when I trying to connect to the > SV> internet, even using the DNS you sent me; the program closes and the > SV> following legend could be readed: > SV> "Arachne is out of conventional (low) DOS memory: > SV> (51800 bytes missing)" > SV> May you explain me what that means? > Arachne says it all ... she doesn't have enough memory to run. > (DOS Arachne suffers from the 640 KB memory limitation ...) > PS: This has nothing to do with DNS ... > > SV> How can I solve the problem and finally use Arachne? > Free up more memory. > Only load drivers that you really need. Look for drivers with smaller > memory footprint. > Load drivers into UMBs. .... > > if you post your autoexec.bat, config.sys file here, than we can help you. > (please also send the output of mem /c /a eg by doing a > mem /c /a >file and attaching the file 'file' to your mail) > > SV> Sergio. > > CU, Ricsi > > -- > |~)o _ _o Richard Menedetter <[EMAIL PROTECTED]> {ICQ: 7659421} (PGP) > |~\|(__\| -=> A man's brain is his Achilles' heel <=- |
- Hi Richard Sergio Vainroj
- Hi Richard Richard Menedetter
