Hi
24 Jun 2001, "Sergio Vainroj" <[EMAIL PROTECTED]> wrote:
SV> So here is the content of my Autoexec.bat:
SV> SET SOUND=C:\ARCHIV~1\CREATIVE\CTSND
SV> SET MIDI=SYNTH:1 MAP:E MODE:0
SV> SET BLASTERø20 I5 D1 H5 P330 E620 T6
move these 3 lines to the end of your autoexec.bat
SV> @ECHO OFF
SV> PROMPT $p$g
SV> PATH C:\WINDOWS;C:\WINDOWS\COMMAND;C:\DOS;C:\CN
SV> SET TEMP=C:\DOS
SV> rem - By Windows Setup - C:\WINDOWS\COMMAND\MSCDEX.EXE /D:IDECD000
SV> mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi)
rem this out ... completely unnecessary
SV> LH /L:3,30464 mode con codepage selectà0
rem it out, and kill all /L: statements from all files
SV> keyb us,,C:\WINDOWS\COMMAND\keyboard.sys
?!? unecessary us is the default - rem it out
SV> REM C:\DOS\MSCDEX.EXE /D:IDECD000
SV> REM C:\DOS\MSCDEX.EXE /D:IDECD000
SV> REM LH /L:3,38320 C:\DOS\MSCDEX.EXE /D:IDECD000
SV> LH /L:3,38320 C:\DOS\MSCDEX.EXE /D:IDECD000
kill the /L:3,38329
SV> UNDELETE /LOAD
do you need it ?? if yes put a LH before it, if no rem it out
SV> SET CLASSPATH=C:\java\classes\vrml\;%CLASSPATH%
SV> And here is my Config.sys:
SV> DEVICE=C:\WINDOWS\HIMEM.SYS
append /numhandles=64
SV> DEVICE=C:\WINDOWS\EMM386.EXE NOEMS XE00-CAFF XI00-DFFF
append i=b000-b7ff
try to kill the last 2 statements (XE.....)
SV> BUFFERS0,0
wrong syntax set it to buffers=10,0
SV> FILES0
wrong syntax set it to files=30
SV> DOS=UMB
SV> LASTDRIVE=N
SV> FCBS=4,0
SV> REM LASTDRIVE=N
SV> REM LASTDRIVE=`
SV> DEVICEHIGH /L:3,16976 =C:\WINDOWS\SETVER.EXE
if you need setver kill the /l: if not rem it out
SV> DOS=HIGH
SV> [common]
SV> REM DEVICEHIGH /L:3,28784 =C:\CDROM\ACERCD.SYS /D:IDECD000
SV> DEVICEHIGH /L:3,17248 =C:\WINDOWS\COMMAND\DISPLAY.SYS CON=(EGA,,1)
rem it out - completely unnecessary
SV> Country4,850,C:\WINDOWS\COMMAND\country.sys
there is a strange character in there ....
syntax is country=<countrycode>, <charset>,<countryfile>
PS: kill thos [common] lines
SV> [common]
SV> REM DEVICE=C:\CDROM\ACERCD.SYS /D:IDECD000
SV> REM LASTDRIVE=N
SV> [common]
SV> REM DEVICE=C:\CDROM\ACERCD.SYS /D:IDECD000
SV> REM LASTDRIVE=N
SV> [common]
SV> REM DEVICE=C:\CDROM\ACERCD.SYS /D:IDECD000
SV> [common]
SV> DEVICE=C:\CDROM\ACERCD.SYS /D:IDECD000
change device to devicehigh
SV> Conventional 640K 164K 476K
this is your problem ... 476 K is not enough for arachne ...
especially if you use epppd.
SV> So I hope you can help me to make Arachne useful for me.
I hope so, too.
Maybe others can advice you how to load eppd/lspppd high ...
SV> Thanks!
CU, Ricsi
PS: there's no need to CC messages to me privately, I'm on the list !
--
|~)o _ _o Richard Menedetter <[EMAIL PROTECTED]> {ICQ: 7659421} (PGP)
|~\|(__\| -=> Double your drive space - delete Windows! <=-
