On 06/26/2011 04:53 PM, "Jérôme M. Berger" wrote:
dmb...@gmail.com wrote:
Trying dhcp with the old syntax fails, and configuring a static ip
appears to succeed, but then fails when I try to do something with the
connection.
eth0="eth0 192.168.0.116 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(eth0)
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
What does "route" say in this case? I had a similar problem with
the update which was due to the gateway being ignored. At that point
I switched to netcfg which worked fine...
Jerome
Looks fine to me. Same output as I get on my laptop.
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
