--- crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Wed, Nov 22, 2017 at 4:55 PM, Richard Wilbur <richard.wil...@gmail.com> wrote: > Working on the high-frequency taper, a couple things have been > bothering me--the two ground vias circled in the attached picture. > Are they either optional or moveable? they're not really optional, they're GNDing VIAs for a couple of capacitors on the TOP layer, associated with the PMIC area. i'll take a look, see what they're for: it *might* be possible to move them direclly south or south east, to the edge of the exclusion area. also i just noticed that TX1N/P has that little kink, it turns 45 degrees anti-clockwise (from the long horizontal straight) about 15mil late, and i really don't know why :) > If so, even moving them East or Northeast takes some pressure > off the taper. If not, we'll work around them but it is a little more > complicated. less complicated is good.... l. _______________________________________________ arm-netbook mailing list arm-netbook@lists.phcomp.co.uk http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to arm-netb...@files.phcomp.co.uk