Hi,
Since it's not possible to install 5.9 release on the internal storage, I
figured that I will try the latest snapshot from May 27th.
With the snapshot I am able to choose to install on both sd0 and sd1 which
was not possible with 5.9.
The installation goes for a while until I get "newfs: wtfs: write error on
block 160: Input/output error".
I think that the hardware is fine since I am able to install and run debian
on it without problems.
Any ideas?
Here is the output:
Available disks are: sd0 sd1.
Which disk is the root disk? ('?' for details) [sd0] sd1
Disk: sd1 geometry: 465/255/63 [7471104 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
*0: 0C 0 1 2 - 2 11 9 [ 64: 32768 ] Win95
FAT32L
1: 00 0 0 0 - 0 0 0 [ 0: 0 ]
unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ]
unused
3: A6 2 11 10 - 465 13 60 [ 32832: 7438272 ]
OpenBSD
Use (W)hole disk$ or (E)dit the MBR? [whole]
Creating a msdos partition and an OpenBSD partition for rest of sd1...done.
/dev/rsd1i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
bps=512 spc=4 res=1 nft=2 rde=512 sec=32768 mid=0xf8 spf=32 spt=63 hds=255
hid=2048
newfs_msdos: /dev/rsd1i: Input/output error
The auto-allocated layout for sd1 is:
# size offset fstype [fsize bsize cpg]
a: 879.7M 34816 4.2BSD 2048 16384 1 # /
b: 239.5M 1836512 swap
c: 3648.0M 0 unused
d: 2144.1M 2327008 4.2BSD 2048 16384 1 # /usr
e: 367.7M 6718048 4.2BSD 2048 16384 1 # /home
i: 16.0M 2048 MSDOS
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
/dev/rsd1a: 879.7MB in 1801696 sectors of 512 bytes
5 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
newfs: wtfs: write error on block 160: Input/output error
newfs: reduced number of fragments per cylinder group from 47056 to 46872
to enlarge last cylinder group
/dev/rsd1e: 367.7MB in 752992 sectors of 512 bytes
5 cylinder groups of 91.55MB, 5859 blocks, 11776 inodes each
newfs: wtfs: write error on block 160: Input/output error
/dev/rsd1d: 2144.1MB in 4391040 sectors of 512 bytes
11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
newfs: wtfs: write error on block 160: Input/output error
Available disks are: sd0.
Which disk do you wish to initialize? (or 'done') [done]
