On Sat, May 28, 2016 at 11:49:07PM +0200, Farid Joubbi wrote:
> Hi,
>
> Since it's not possible to install 5.9 release on the internal storage, I
> figured that I will try the latest snapshot from May 27th.
>
> With the snapshot I am able to choose to install on both sd0 and sd1 which
> was not possible with 5.9.
> The installation goes for a while until I get "newfs: wtfs: write error on
> block 160: Input/output error".
> I think that the hardware is fine since I am able to install and run debian
> on it without problems.
>
> Any ideas?
Today's snapshot is built the below diff, I'd be curious if it changes
anything.
Index: ommmc.c
===================================================================
RCS file: /cvs/src/sys/arch/armv7/omap/ommmc.c,v
retrieving revision 1.21
diff -u -p -r1.21 ommmc.c
--- ommmc.c 20 May 2016 23:07:05 -0000 1.21
+++ ommmc.c 29 May 2016 14:17:03 -0000
@@ -393,8 +393,10 @@ ommmc_attach(struct device *parent, stru
saa.sct = &ommmc_functions;
saa.sch = sc;
saa.caps = SMC_CAPS_4BIT_MODE;
+#if 0
if (caps & MMCHS_CAPA_HSS)
saa.caps |= SMC_CAPS_MMC_HIGHSPEED;
+#endif
sc->sdmmc = config_found(&sc->sc_dev, &saa, NULL);
if (sc->sdmmc == NULL) {
>
>
> Here is the output:
>
> Available disks are: sd0 sd1.
> Which disk is the root disk? ('?' for details) [sd0] sd1
> Disk: sd1 geometry: 465/255/63 [7471104 Sectors]
> Offset: 0 Signature: 0xAA55
> Starting Ending LBA Info:
> #: id C H S - C H S [ start: size ]
> -------------------------------------------------------------------------------
> *0: 0C 0 1 2 - 2 11 9 [ 64: 32768 ] Win95
> FAT32L
> 1: 00 0 0 0 - 0 0 0 [ 0: 0 ]
> unused
> 2: 00 0 0 0 - 0 0 0 [ 0: 0 ]
> unused
> 3: A6 2 11 10 - 465 13 60 [ 32832: 7438272 ]
> OpenBSD
> Use (W)hole disk$ or (E)dit the MBR? [whole]
> Creating a msdos partition and an OpenBSD partition for rest of sd1...done.
> /dev/rsd1i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
> bps=512 spc=4 res=1 nft=2 rde=512 sec=32768 mid=0xf8 spf=32 spt=63 hds=255
> hid=2048
> newfs_msdos: /dev/rsd1i: Input/output error
> The auto-allocated layout for sd1 is:
> # size offset fstype [fsize bsize cpg]
> a: 879.7M 34816 4.2BSD 2048 16384 1 # /
> b: 239.5M 1836512 swap
> c: 3648.0M 0 unused
> d: 2144.1M 2327008 4.2BSD 2048 16384 1 # /usr
> e: 367.7M 6718048 4.2BSD 2048 16384 1 # /home
> i: 16.0M 2048 MSDOS
> Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
> /dev/rsd1a: 879.7MB in 1801696 sectors of 512 bytes
> 5 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> newfs: wtfs: write error on block 160: Input/output error
> newfs: reduced number of fragments per cylinder group from 47056 to 46872
> to enlarge last cylinder group
> /dev/rsd1e: 367.7MB in 752992 sectors of 512 bytes
> 5 cylinder groups of 91.55MB, 5859 blocks, 11776 inodes each
> newfs: wtfs: write error on block 160: Input/output error
> /dev/rsd1d: 2144.1MB in 4391040 sectors of 512 bytes
> 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> newfs: wtfs: write error on block 160: Input/output error
> Available disks are: sd0.
> Which disk do you wish to initialize? (or 'done') [done]
