Yes, it is. j.
On Thu, Nov 17, 2022 at 1:40 PM Sagar Acharya <sagaracha...@tutanota.com> wrote: > I'll try it out. I was assuming that since cubieboard also has A20, things > would work straightaway. Are device trees same across GNU/Linux and OpenBSD? > > Thanking you > Sagar Acharya > > > Nov 17, 2022, 11:42 by jan.de.kr...@gmail.com: > > > I am running armv7/7.2 on this board. > > This is how I got it to run: > > > > from one of the images at > > > > https://images.olimex.com/release/a20/ > > > > you extract > > /usr/lib/linux-image-5.10.105-olimex/sun7i-a20-olinuxino-lime2.dtb (or > the > > other one if your board is that way) > > > > I put it in the root of the EFI (dos) partition, which is 'p1' on my > image. > > > > and you extract > > /usr/lib/u-boot-olinuxino/a20-olinuxino/u-boot-sunxi-with-spl.bin > > > > it must go onto the image you created for bsd, in the usual place. > > j. > > > > On Thu, Nov 17, 2022 at 10:46 AM Sagar Acharya < > sagaracha...@tutanota.com> > > wrote: > > > >> I finally recognized the beauty of OpenBSD with extremely easy configs > of > >> OpenSMTPD, doas, xenocara, and many more such softwares. I have been a > dev > >> at Hyperbola soon to be HyperbolaBSD. > >> > >> I was trying to install OpenBSD Lime2. I tried flashing cubieboard image > >> of miniroot followed by flashing u-boot as shown in installation > >> instructions. I built a fresh binary from 2022.10 release of u-boot. > >> > >> dd if=miniroot-cubie.img of=/dev/sda bs=1M conv=sync > >> dd if=u-boot-sunxi-with-spl.bin of=/dev/sda bs=1024 seek=8 > >> > >> u-boot tries to search for /etc/random.seed which it doesn't find. There > >> are just 2 files, bsd and bsd.mp . After the prompt, > >> "EHCI fails to shut down host controller", a completely black screen > turns > >> up. So, I'm unable to get the kernel booted. Kindly help. > >> > >> Thanking you > >> Sagar Acharya > >> > >
