The problem seems to be because : [ 12.186250] sym53c8xx 0000:00:0d.0: BAR 0: can't reserve [io 0x44000000-0x440000ff] [ 12.348049] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <n...@fluxnic.net> [ 12.374710] eth0: SMC91C11xFD (rev 1) at d1024000 IRQ 25 [nowait]
The SCSI driver isn't initialising the card properly or something like that, so sd_mod isn't being loaded by udev since there are no disks. Compare the dmesg output from the kernel in 13.37: [ 16.344200] sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 27 [ 16.356532] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking [ 16.379719] sym0: SCSI BUS has been reset. [ 16.386938] scsi0 : sym-2.2.3 [ 19.414393] sym0: unknown interrupt(s) ignored, ISTAT=0x5 DSTAT=0x80 SIST=0x0 [ 19.425751] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 19.440427] scsi target0:0:0: tagged command queuing enabled, command queue depth 16. [ 19.455265] scsi target0:0:0: Beginning Domain Validation I don't know how to fix that yet. -- Stuart Winter Slackware ARM: www.armedslack.org _______________________________________________ ARMedslack mailing list ARMedslack@lists.armedslack.org http://lists.armedslack.org/mailman/listinfo/armedslack