Installed CMDB 2.0, ARS 7.0 on Oracle 10g as a non-root user.
The problem I have encountered is as follows:
I'm running Foundation Discovery and Topology Discovery 1.3. In Remedy User
under CMDB, at the Administration side key, it shows CMDB 2.0.
I have a problem when I attempt to run a Discovery to CMDB syncronization
configuration.
In the directory:
D:\ProgramFiles\BMCsoftware\Discovery\etc\cmdb_export_util\configuration
I start the batch file "config_init.bat".
I fill in: Server, Port, User, and Password. Then "press" Check Server.
The response I get is as follows:
=========================================
<Server IP address went here>:
perform.bsm.util.version.BadVersionException: Problem detected on 1 app(s):
App Remedy CMDB :
1.1.0 patch 002 <= 2.0.0 <= 1.1.0 patch 005 FAILED : AboveMax
If server is unreachable:
- Check the settings you entered,
- the smooth functionning of the server,
- or the network availability,
and try again.
If a bad application version has been detected:
- Check the CMDB server configuration,
- install the good version of the CMDB server,
- or change the CMDB server settings,
and try again.
==========================================
Also found in the CMDB install log is the following paragraph:
++++++++++++++++++++++++++++++++++++++++++
You are installing the product as a user other than root.
BMC Atrium CMDB installer may not be able update the armonitor.conf
and ar.conf files. You will need to update these two files manually.
Do you want to continue this installation? [y] y
++++++++++++++++++++++++++++++++++++++++++
I can't seem to find the file armonitor.conf and whatever must be changed in
ar.conf is unclear.
Does anyone have any ideas except for a reinstall?
Thank you all very much.
__20060125_______________________This posting was submitted with HTML in it___
_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at http://www.wwrug.org
