Thanks for the info Raj,

Will look into it. Have done lot of automation using SRM until version 8.x
and this should make it much more easier with version 9.

Regards,
Mahesh

On Mon, Nov 9, 2015 at 10:59 AM, Raj <rajashekhar_hirem...@bmc.com> wrote:

> **
>
> Part of 90 but separate installer.
>
>
>
> -Raj
>
>
>
> *From:* Mahesh Chandra [via ARS (Action Request System)] 
> [mailto:ml-node+[hidden
> email] <http:///user/SendEmail.jtp?type=node&node=123348&i=0>]
> *Sent:* Monday, November 09, 2015 22:27
> *To:* Hiremath, Raj
> *Subject:* Re: Simple PD process
>
>
>
> **
>
> Thank you for correcting. Haven't had a chance to play with the Process
> Designer yet, but it looks similar to "Abydos Process Designer".
>
>
>
> Is this a separate purchase or a part of ITSM / SRM 9.0 ?
>
>
>
> Thanks
>
> Mahesh
>
>
> On Nov 9, 2015, at 9:35 AM, Raj <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=123347&i=0>> wrote:
>
> **
>
> We are talking about PD here and hence Run Process, Web Service etc is
> thing of past.
>
> You just need one drag drop on task and you are done.
>
> Now, Marcelo, you are far luckier than some of older implementations, 9.0
> is as good as it gets for PD.
>
> I have attached both – setting required for email notifications (not
> directly related to PD) as well as generic managerial approval process for
> PD in SRM.
>
> I am not sure if the attachments go through, if not, let me either have
> your private email address or if you have any ftp location, I can upload /
> any other suggested way.
>
>
>
>
>
> -Raj
>
>
>
>
>
> *From:* Mahesh Chandra [via ARS (Action Request System)] 
> [mailto:ml-node+[hidden
> email] <http:///user/SendEmail.jtp?type=node&node=123344&i=0>]
> *Sent:* Monday, November 09, 2015 18:58
> *To:* Hiremath, Raj
> *Subject:* Re: Simple PD process
>
>
>
> **
>
> Service Request ---> Approval ---> Work Order.
>
>
>
> Depending on the template name or other criteria, push the INC/WO data to
> another form
>
> from where you should be able to send a notification/ invoke a webservice
> / run process and complete the Request.
>
>
>
> This is how I have done several automated fulfillment since SRM 2.0 to
> until SRM 8.x. The push workflow from INC/ WO/ CRQ to a custom form is all
> data driven so that it is scalable to other future requirements.
>
>
>
> Regards,
>
> Mahesh
>
>
> On Nov 9, 2015, at 7:49 AM, Martinez, Marcelo A <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=123339&i=0>> wrote:
>
> **
>
> Hi Raj,
>
> ARS/ITSM/PD 9.0
>
>
>
> I tried to submit various screenshots through here but was unable to. I’ll
> describe the process since it is simple.
>
>
>
> I have an SRD that requires manager approval. After approved, and email
> should go out to a static email address with just the requester’s userID.
> Then, the SR should close (we don’t need a fulfillment request such as WO
> or INC).
>
> That’s it..
>
>
>
> Thanks,
>
> Marcelo
>
>
>
> *From:* Action Request System discussion list(ARSList) [[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=123339&i=1>] *On Behalf Of *Raj
> *Sent:* Sunday, November 08, 2015 8:34 AM
> *To:* [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=123339&i=2>
> *Subject:* Re: Simple PD process
>
>
>
> **
>
> I can help you with this, can you please state AR, ITSM, SRM and PD
> versions?
>
>
>
> If the process is short, perhaphs, if you can draw the digram in outlook
> and convey?
>
>
>
> -Raj
>
>
>
> *From:* Martinez, Marcelo A [via ARS (Action Request System)] [mailto:
> ml-node+[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=123336&i=0>]
> *Sent:* Saturday, November 07, 2015 00:47
> *To:* Hiremath, Raj
> *Subject:* Re: Simple PD process
>
>
>
> **
>
> I tied sending over my screenshots.. but aren’t coming through. I also
> tried to PDF my email and send it as an attachment but failed.  Not sure if
> the ARSList is working.
>
>
>
>
>
>
>
> *From:* Action Request System discussion list(ARSList) [mailto:[hidden
> email] <http:///user/SendEmail.jtp?type=node&node=123335&i=0>] *On Behalf
> Of *Martinez, Marcelo A
> *Sent:* Friday, November 06, 2015 10:08 AM
> *To:* [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=123335&i=1>
> *Subject:* Simple PD process
>
>
>
> **
>
> Hello List,
>
> I have a simple PD issue.  I’ll preface my email with “this is the first
> process I’ve created with PD”
>
>
>
> What I’m trying to do is create a simple process that, after approval, it
> sends an email, then closes the request. No need for a WO, CHG, or INC..
> just send the email and close the Service Request.
>
>
>
> The first process was very simple; with only 2 tasks:
>
> I have an initiation task that captures some data. This task has “Set
> field” actions.
>
> The next task as 2 actions: one for send email and one for “update
> request”.
>
> (the request gets approved by the requester’s manager – per the SRD –
> which has an ‘Approval Type” = “Manager”
>
>
>
> This works great, except that the request isn’t closed after the email is
> sent. (although now after playing with the pre and post statuses, the
> approval doesn’t happen).
>
>
>
>
>
> The second process I tried was:
>
>
>
> 1.      Initiation task (captures data)
>
> 2.      Task #2 gets supervisors name based on data captured
>
> 3.      Decision task (supervisor approval)
>
> 4.      Rejected action
>
> 5.      Approved: send email
>
> 6.      Close service request
>
>
>
> The process stops at the supervisor approval task. So there must be a
> problem here.
>
>
>
>
>
> I’ve also tried using 3 tasks but the request hangs at “send email” task.
>
>
>
> Having never used this tool; I have some questions. Can you use SRM
> approvals and PD process, for SRDs? Or the approval has to be done via the
> PD process? If so, what are the steps to configure approvals via PD.
>
> Thanks in advance,
> Marcelo
>
>
>
>
>
> _ARSlist: "Where the Answers Are" and have been for 20 years_
>
> _ARSlist: "Where the Answers Are" and have been for 20 years_
> ------------------------------
>
> *If you reply to this email, your message will be added to the discussion
> below:*
>
>
> http://ars-action-request-system.1.n7.nabble.com/Simple-PD-process-tp123334p123335.html
>
> To start a new topic under ARS (Action Request System), email [hidden
> email] <http:///user/SendEmail.jtp?type=node&node=123336&i=1>
> To unsubscribe from ARS (Action Request System), click here.
> NAML
> <http://ars-action-request-system.1.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>
> -rAJ
>
>
> ------------------------------
>
> View this message in context: RE: Simple PD process
> <http://ars-action-request-system.1.n7.nabble.com/Simple-PD-process-tp123334p123336.html>
> Sent from the ARS (Action Request System) mailing list archive
> <http://ars-action-request-system.1.n7.nabble.com/> at Nabble.com
> <http://nabble.com>.
> _ARSlist: "Where the Answers Are" and have been for 20 years_
>
> _ARSlist: "Where the Answers Are" and have been for 20 years_
>
> _ARSlist: "Where the Answers Are" and have been for 20 years_
> ------------------------------
>
> *If you reply to this email, your message will be added to the discussion
> below:*
>
>
> http://ars-action-request-system.1.n7.nabble.com/Simple-PD-process-tp123334p123339.html
>
> To start a new topic under ARS (Action Request System), email [hidden
> email] <http:///user/SendEmail.jtp?type=node&node=123344&i=1>
> To unsubscribe from ARS (Action Request System), click here.
> NAML
> <http://ars-action-request-system.1.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>
>
> *WorkingSRMApproval.xml* (17K) Download Attachment
> <http://ars-action-request-system.1.n7.nabble.com/attachment/123344/0/WorkingSRMApproval.xml>
> *Email Configuration settings.docx* (1M) Download Attachment
> <http://ars-action-request-system.1.n7.nabble.com/attachment/123344/1/Email%20Configuration%20settings.docx>
>
> -rAJ
>
>
> ------------------------------
>
> View this message in context: RE: Simple PD process
> <http://ars-action-request-system.1.n7.nabble.com/Simple-PD-process-tp123334p123344.html>
> Sent from the ARS (Action Request System) mailing list archive
> <http://ars-action-request-system.1.n7.nabble.com/> at Nabble.com
> <http://nabble.com>.
> _ARSlist: "Where the Answers Are" and have been for 20 years_
>
> _ARSlist: "Where the Answers Are" and have been for 20 years_
> ------------------------------
>
> *If you reply to this email, your message will be added to the discussion
> below:*
>
>
> http://ars-action-request-system.1.n7.nabble.com/Simple-PD-process-tp123334p123347.html
>
> To start a new topic under ARS (Action Request System), email [hidden
> email] <http:///user/SendEmail.jtp?type=node&node=123348&i=1>
> To unsubscribe from ARS (Action Request System), click here.
> NAML
> <http://ars-action-request-system.1.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
> -rAJ
>
> ------------------------------
> View this message in context: RE: Simple PD process
> <http://ars-action-request-system.1.n7.nabble.com/Simple-PD-process-tp123334p123348.html>
> Sent from the ARS (Action Request System) mailing list archive
> <http://ars-action-request-system.1.n7.nabble.com/> at Nabble.com.
> _ARSlist: "Where the Answers Are" and have been for 20 years_
>

_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
"Where the Answers Are, and have been for 20 years"

Reply via email to