Yes it does appear like something is failing. I didn't have any issues with propagating the cache across the secondary servers in 6.3 and 7.0. Haven't as yet set up any server groups in 7.1 so it may be a 7.1 issue?
If this is a dev server where 'not much' may get written to logs, I'd suggest turning on your API logs to see what API's are triggered at the time the signal is sent from the primary server to the secondary servers.. I do not remember what signal you are supposed to expect but comparing the signals that have ran against the primary servers with those that have run on the secondary servers may give you an idea.. Joe -----Original Message----- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] Behalf Of J.T. Shyman Sent: Wednesday, April 09, 2008 1:57 PM To: arslist@ARSLIST.ORG Subject: Re: Server Group ** Here’s how I’m testing: 1. Log on to primary server, open form, make note of layout 2. Close AR User 3. Clear AR Cache 4. Log on to secondary server, open form, make note of layout. It is the same as on the primary form at this point. 5. Close AR User 6. Clear AR Cache 7. Make change to layout of form on Primary server 8. Log on to primary server, open form, notice change to form 9. Close AR User 10. Clear AR Cache 11. Log on to secondary server, open form, do not see change 12. Close AR User 13. Clear AR Cache 14. Wait 10 minutes, log on to secondary server, open form, do not see change. I agree. The entry below should indicate that arsignal has been triggered to get the new definitions but it appears to be false or not working as it has appeared several times in the log but the definition has not been updated on the secondary server. Guess I’ll open a ticket with support… Thanks for the help, Joe. --- J.T. Shyman ---------------------------------------------------------------------------- -- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Joe D'Souza Sent: Wednesday, April 09, 2008 12:13 PM To: arslist@ARSLIST.ORG Subject: Re: Server Group Is development cache mode on, on any of these servers? If it is on I think you will not notice the change until you log out and log in.. The entries you see below are written to the log only after arsignal has been triggered to read the new definitions.. Joe -----Original Message----- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] Behalf Of J.T. Shyman Sent: Wednesday, April 09, 2008 10:40 AM To: arslist@ARSLIST.ORG Subject: Re: Server Group ** Ok, I made a change with the server group logging on. Here’s what I see on the secondary server: <SGRP> /* Wed Apr 09 2008 10:04:00.5253 */ Server <servername> executing recache request <SGRP> /* Wed Apr 09 2008 10:04:30.5362 */ Server <servername> noting request from remote server to recache definitions <SGRP> /* Wed Apr 09 2008 10:05:00.5506 */ Server <servername> executing recache request <SGRP> /* Wed Apr 09 2008 10:11:00.6834 */ Server <servername> noting request from remote server to recache definitions <SGRP> /* Wed Apr 09 2008 10:11:30.6960 */ Server <servername> executing recache request <SGRP> /* Wed Apr 09 2008 10:20:32.6579 */ Server <servername> noting request from remote server to recache definitions <SGRP> /* Wed Apr 09 2008 10:21:02.6685 */ Server <servername> executing recache request <SGRP> /* Wed Apr 09 2008 10:24:32.7440 */ Server <servername> noting request from remote server to recache definitions <SGRP> /* Wed Apr 09 2008 10:25:02.7546 */ Server <servername> executing recache request <END OF LOG FILE>09 2008 10:28:34.5618 */ Server <servername> noting request from remote server to recache definitions <END OF LOG FILE>09 2008 10:29:04.5732 */ Server <servername> executing recache request <END OF LOG FILE>09 2008 10:31:34.6280 */ Server <servername> noting request from remote server to recache definitions <END OF LOG FILE>09 2008 10:32:06.4183 */ Server <servername> executing recache request <END OF LOG FILE> With the last log entry appearing about 30 seconds after I hit save on the change. However, the change does not appear to have take affect on the secondary server. Yes, I’ve cleared my AR cache. The change does appear on the primary server where it was made. I can force the change by running “arsignal –r servername” --- J.T. Shyman ---------------------------------------------------------------------------- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of J.T. Shyman Sent: Wednesday, April 09, 2008 9:26 AM To: arslist@ARSLIST.ORG Subject: Re: Server Group This has worked before so I’m assuming (yes, yes, I know about assume) that it still is. Turning on the logging is a great idea. Not sure why I didn’t think of that…let me do that and see what happens. Thanks --- J.T. Shyman No virus found in this outgoing message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.22.10/1367 - Release Date: 4/9/2008 7:10 AM _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"